do you guys know how a pool works?
variance in your effective hashrate is caused by the pool calculating your rate based on the number of shares you submit in a given period
If you're lucky you'll submit an above average number of shares and the pool will show your effective rate as being higher than usual. so if you're unlucky and submit fewer shares in a period then your effective hashrate will drop below the hashrate that you're actually mining at
over short periods of time this can result in large variations
If you look at your average hashrate over a longer period (=you mine constantly during that time) then it should be close to your actual rate.

I installed this on a complete newly upgraded to Windows Anniversary Edition 10 64 bit.
Trust me, its not good.
This is from one fellow developer to another ( me to you )
You need to install your code on a complete new PC and go step by step, you will see the missing holes.
Running this program even resulted in the miners (Claymore, ewbf,etc. ) only recognizing 7 out of my 8 graphics cards, YET all 8 are visible in device manager.
Plus your searching my whole damn hard drive and copying whole directories into your Bin directory ( including files and scripts that are not even required for your program to run )  Kind of like a virus.
Hey man, I would use it if it were stable, but not in its present form, no way.

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf

In the new multipoolminer 2.7 this error appears and no conversion is shown in $

I would like for coins using Xevan and Phi to be added to the suite , AMD and NVIDIA.
Please both.

I hope it can be done

Does miningpoolhub auto-switch to every scrypt coin which is the most profitable atm? (Gamecredits,Litecoin,Linx,EMC2 etc...?)

Thx for link, is this miner similar to the nemos miner?  Which one is better?
I noticed it points to miningpoolhub, is that better than ahashpool?
regards

Is anyone dual mining ether and decred.
I have some 1070's I like to try this with.
Can anyone help with the script file?
Also anyone with a script file that can help in times of errors thrown by GPU malfunction / restarting, getting 0 hash rates, some way to automatically restart the miner if there is an issue?

You know, while I don't completely agree with your business of removing fees, I understand it - it's just business.

But you have to be a special kind of cunt to advertise it in his thread.

HELLOOOOOOOOO!!!!! repost!

Can someone help me reset my PIN on the HUB?  I'm not receiving the email for the new PIN.  It's not being sent.  I've checked trash folder, spam folder, reject folder, everything.  No email from the HUB.

If technical support is not provided on this website (for MiningPoolHub)...then where is it?

I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.

It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.

Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?

Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.

I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.  

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really  looking for a good multi switch European mining pool close to Holland.

You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.

Thanks

Nobody helps here 

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

Hi there!
I recently noticed that my MultiMiner says on the top of the benchmark list and at the bottom line that specific miner is the most profitable and at the same time it does mine with different one as active. It looks to me like it is not refreshing the profits in the benchmark list and at the bottom line where suppose to be the active miner so I hope this doesn't result in mining coins which are not the best choice at the moment. Am I doing something wrong? Can someone explain why is that? Thanks in advance!

so, if apart from nicehash, my gpus mine zcash until the end of the block I would have been entitled to my sharing quota?