Is there anyway to set your own fixed strantum diff level on Lyra2z. I am getting a solid 18.5 Mhz on my miner yet on your site it is constantly varying between 12 (most of time around 12) Mhz and spikes to 18 Mhz and that is due to the diff level constantly being adjusted to high.
Many Thanks, because this is the only pool that does this Algo, id prefer to fix it here than move elsewhere.
And thank you for answering my maxcoin issue. I turned auto exchange off as its faster I transfer coins manually to an exchange and perform the action. Its still a handy feature to have there just in case however.
I second notion for Zen, in fact it would be nice to have all equihash coins added at some point.
2017-10-20 19:46:34] accepted: 125/125 (diff 0.063), 18.55 MH/s yes!
[2017-10-20 19:46:36] GPU #1: GeForce GTX 1080 Ti, 3181.37 kH/s
[2017-10-20 19:46:36] GPU #3: GeForce GTX 1080 Ti, 3211.42 kH/s
[2017-10-20 19:46:36] GPU #4: Gigabyte GTX 1080, 2332.96 kH/s
[2017-10-20 19:46:37] GPU #5: GeForce GTX 1080 Ti, 3210.13 kH/s
[2017-10-20 19:46:37] GPU #2: GeForce GTX 1080 Ti, 3213.28 kH/s
[2017-10-20 19:46:38] GPU #0: GeForce GTX 1080 Ti, 3296.99 kH/s
[2017-10-20 19:46:38] accepted: 126/126 (diff 0.077), 18.54 MH/s yes!
[2017-10-20 19:46:52] GPU #5: GeForce GTX 1080 Ti, 3269.53 kH/s
[2017-10-20 19:46:52] accepted: 127/127 (diff 1.634), 18.54 MH/s yes!
[2017-10-20 19:46:54] GPU #2: GeForce GTX 1080 Ti, 3263.17 kH/s
[2017-10-20 19:46:54] accepted: 128/128 (diff 0.121), 18.54 MH/s yes!
[2017-10-20 19:47:08] GPU #1: GeForce GTX 1080 Ti, 3251.92 kH/s
[2017-10-20 19:47:08] accepted: 129/129 (diff 1.247), 18.54 MH/s yes!
[2017-10-20 19:47:34] GPU #1: GeForce GTX 1080 Ti, 3256.41 kH/s
[2017-10-20 19:47:35] accepted: 130/130 (diff 0.129), 18.54 MH/s yes!
[2017-10-20 19:47:40] GPU #0: GeForce GTX 1080 Ti, 3285.59 kH/s
[2017-10-20 19:47:40] accepted: 131/131 (diff 0.073), 18.55 MH/s yes!
[2017-10-20 19:47:41] GPU #3: GeForce GTX 1080 Ti, 3272.75 kH/s
[2017-10-20 19:47:41] GPU #4: Gigabyte GTX 1080, 2373.42 kH/s
[2017-10-20 19:47:45] GPU #0: GeForce GTX 1080 Ti, 3291.74 kH/s
[2017-10-20 19:47:46] accepted: 132/132 (diff 0.146), 18.55 MH/s yes!
[2017-10-20 19:47:51] Stratum difficulty set to 22.0497 (0.08613)
[2017-10-20 19:47:52] GPU #5: GeForce GTX 1080 Ti, 3273.28 kH/s
[2017-10-20 19:47:54] GPU #2: GeForce GTX 1080 Ti, 3279.23 kH/s
[2017-10-20 19:48:06] GPU #3: GeForce GTX 1080 Ti, 3268.81 kH/s
[2017-10-20 19:48:06] accepted: 133/133 (diff 0.426), 18.55 MH/s yes!
[2017-10-20 19:48:14] GPU #2: GeForce GTX 1080 Ti, 3189.95 kH/s
[2017-10-20 19:48:14] accepted: 134/134 (diff 0.098), 18.55 MH/s yes!
[2017-10-20 19:48:36] GPU #1: GeForce GTX 1080 Ti, 3178.34 kH/s
[2017-10-20 19:48:42] GPU #4: Gigabyte GTX 1080, 2344.84 kH/s
[2017-10-20 19:48:46] GPU #5: GeForce GTX 1080 Ti, 3234.25 kH/s
[2017-10-20 19:48:46] accepted: 135/135 (diff 0.102), 18.54 MH/s yes!
[2017-10-20 19:48:52] GPU #0: GeForce GTX 1080 Ti, 3238.06 kH/s
[2017-10-20 19:49:07] GPU #3: GeForce GTX 1080 Ti, 3222.95 kH/s
[2017-10-20 19:49:13] GPU #2: GeForce GTX 1080 Ti, 3270.97 kH/s
[2017-10-20 19:49:33] GPU #1: GeForce GTX 1080 Ti, 3230.56 kH/s
[2017-10-20 19:49:33] accepted: 136/136 (diff 0.239), 18.54 MH/s yes!
[2017-10-20 19:49:41] GPU #4: Gigabyte GTX 1080, 2367.39 kH/s
[2017-10-20 19:49:46] GPU #5: GeForce GTX 1080 Ti, 3270.41 kH/s
[2017-10-20 19:49:58] GPU #0: GeForce GTX 1080 Ti, 3273.59 kH/s
[2017-10-20 19:50:06] GPU #3: GeForce GTX 1080 Ti, 3272.66 kH/s
[2017-10-20 19:50:14] GPU #2: GeForce GTX 1080 Ti, 3228.81 kH/s
[2017-10-20 19:50:26] GPU #4: Gigabyte GTX 1080, 2333.87 kH/s
[2017-10-20 19:50:26] accepted: 137/137 (diff 1.057), 18.54 MH/s yes!
[2017-10-20 19:50:35] GPU #1: GeForce GTX 1080 Ti, 3164.36 kH/s
[2017-10-20 19:50:47] GPU #5: GeForce GTX 1080 Ti, 3200.25 kH/s
[2017-10-20 19:50:47] GPU #3: GeForce GTX 1080 Ti, 3185.98 kH/s
[2017-10-20 19:50:47] accepted: 138/138 (diff 0.377), 18.54 MH/s yes!
[2017-10-20 19:51:03] GPU #2: GeForce GTX 1080 Ti, 3253.40 kH/s
[2017-10-20 19:51:03] accepted: 139/139 (diff 0.953), 18.54 MH/s yes!
[2017-10-20 19:51:05] GPU #0: GeForce GTX 1080 Ti, 3202.91 kH/s
your site always hovers on 12Mhz
Hashrate
12.68
There's no way to set static diff for zcoin.
(I only enable this feature for some fast block changing coins)
What miner are you using? Have you tried latest djm34 build linked on zcoin miningpoolhub main page?
Someone told me that it solved issue.
sometimes i see this
SC: Stratum - Connected (europe.hub.miningpoolhub.com:20550)
SC: Received unknown response: {"id":null,"method":"mining.notify","params":["6
0d","0x6b6564206265666f72652069742063616e2062652075736564227d0a","0x000000001253
3fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}
I don't understand why this is unknown response.
You are using claymore right? I'll contact claymore about it.
Can you send me log file of this. I need to read around that message.
Hi please the administrator of the pool can post the link to unlock an account because the message said that some instructions will be send to my email but until now I didnt receive nothing? Please admin can you help me with this?
You can contact me privately via
contact@miningpoolhub.comI usually unlocked account when I receive unlocked request email.
Hello, i have unconfirmed transactions for ZCoin starting from 2017-10-22 10:31:55 (UTC). It`s been several hours and still not confirmed. Sshot attached. Dont know is it normal to be this long?
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FInPXcXf.jpg&t=665&c=iGkQqV2ytdXv3A)
Zcoin needs about 1 day to confirm. It's coin's spec.
Hello all, I have a problem with wallet management, I already added PAYMENT ADDRESS and PAYOUT TO section is still Gray with no info. When I'm trying to Cash out im receiving a message: You have no payout address set.
What am I doing wrong?
Thanks
Are you sure you added wallet address?
It should be shown both left and right address field.
You should not duplicate, valid address and valid PIN/OTP.
Let me know your id, coin, and address info if you are still stuck.
Will you add BTG soon after the fork?
I took snapshot of BTG but BTG wallet is not ready yet.
Still no mainnet working.
Thanks. I'll check.
Mr MPH,
Have you found an alternative solution yet to provide a live API instead of the cloudflare cached one? Please do. Thanks.
There's no alternative solution I found yet. Adding some other socket connection would be better I think.
I tried today mining on hub.miningpoolhub.com with Sgminer 5.5
But all I get is
most likely you put wrong URL, forgot to add port, or have not setup a worker.
And I have this in config file and ports are opened.
{
"pools" : [
{
"poolname" : "neoscrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12012",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "neoscrypt"
},
{
"poolname" : "x15",
"url" : "stratum+tcp://hub.miningpoolhub.com:12009",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "bitblock"
},
{
"poolname" : "x13",
"url" : "stratum+tcp://hub.miningpoolhub.com:12008",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "marucoin-mod"
},
{
"poolname" : "x11",
"url" : "stratum+tcp://hub.miningpoolhub.com:12007",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "darkcoin-mod"
},
{
"poolname" : "myriadcoin-groestl",
"url" : "stratum+tcp://hub.miningpoolhub.com:12005",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "myriadcoin-groestl"
},
{
"poolname" : "keccak",
"url" : "stratum+tcp://hub.miningpoolhub.com:12003",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "maxcoin"
},
{
"poolname" : "scrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12001",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "10"
},
{
"poolname" : "scryptn",
"url" : "stratum+tcp://hub.miningpoolhub.com:12002",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11"
}
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}
You should set appropriate hub worker job on Hub Worker page.
Also don't forget to change username.workername to your own username and workername.
problem on zcoin pool ? getting half haterate
Maybe try djm34's latest ccminer release. It would help.
Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really looking for a good multi switch European mining pool close to Holland.
You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.
Thanks
There's no europe server for scrypt algo currently.
You can mine scrypt algo based coins by pointing hub.miningpoolhub.com:17001
Also I recommend you to add auto exchange feature for it. It will auto exchange several scrypt coins to one coin easily.
need ZEN pool
![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif)
faster
I'm working on ZEN pool.
It's not that easy than I thought because of zclassic fork and several duplications.
Does anyone have any tips to help me improve my returns ? Can anyone check my math?
Here are my stats:
https://imgur.com/a/Olkf7I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock
(257 MHs)This should net me around 3 MONA coins for 24h according to mining calculator
https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=CalculateSo far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.
I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.
What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).
I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.
What can I do to improve my returns ?
Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?
I recently found that some ccminer's numbers are not that accurate or reliable for some specific algo.
Lyra2z, Lyra2RE2 seems have some memory related bottleneck and their works are not submitted in time.
Maybe trying djm34's latest ccminer. It submits stale shares anyway and it would help for some miners.
Hello,
This is my first foray into mining and I am just testing the waters with my standard desktop. I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working. I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner. I know this isn't optimal for mining. Again, I am just trying to figure it out right now. Thank you for any help.
Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100
The above errors show up as soon as the miner starts running. Additionally once the miner starts running I receive the message below with what I think is an error:
Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)
Have you inserted correct username.workername?
What commandline did you use?
Yeah thanks.
Hello,
This is my first foray into mining and I am just testing the waters with my standard desktop. I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working. I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner. I know this isn't optimal for mining. Again, I am just trying to figure it out right now. Thank you for any help.
Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100
The above errors show up as soon as the miner starts running. Additionally once the miner starts running I receive the message below with what I think is an error:
Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)
Remove those lines from config.txt and add them to start.bat
set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe
Config.txt should look something like
-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6
change user to your own user name
I moved the lines from config.txt to Start.bat. Now when it starts up it displays the following:
C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined
C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined
C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined
C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined
C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined
Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1. I included the password even though the site says it doesn't check it.
I am at a loss as to what I am doing wrong.
What is your username? You should input your actual username.workername at USER.RIG1
e.g.) If your username is hello, input like hello.rig1