I like most of all Point 6; I think that some change is needed to fund the team which has remained loyal to the project.
Nice words @canonical. It is actually to fund the project and not the team. |
|
|
|
I am trying to synch the old nist5 wallet in order to transfer some coins from the exchange to swap them, but it's been stuck on 0 peers for hours, never established connection.
I have tried adding the nodes posted on the first page by op but the result was the same.
Are there any working nodes i can add to the config file ?
I also tried sending a test swap directly from the exchange to the swap address the site provided me, never received any coins on the new chain, i guess that doesn't at all.
You may have to elaborate more on what you saying for us to understand you quite well First of all, i dont see the need for you to resync NIST5 wallet if you have to transfer coins from the exchange to swap them. You only need to download your new XEVAN wallet, get an address, send coins directly from exchange to address provided for you on swap website and follow the rest of the instruction on swap website carefully Also, i dont seem to know why your nist5 wallet isn't syncing. mine was open and fully synced as i was typing this reply. Try these nodes in snipet below addnode=104.237.90.45
addnode=109.13.197.20
addnode=109.134.111.27
addnode=109.193.246.4
addnode=109.235.65.47
addnode=109.66.29.59
addnode=112.205.195.238
addnode=113.177.43.66
addnode=113.66.62.143
addnode=115.132.82.135
addnode=115.79.5.135
addnode=128.69.89.163
addnode=128.74.47.234
addnode=128.74.73.242
addnode=128.74.81.51
addnode=136.24.186.155
addnode=145.249.132.129
addnode=145.249.148.173
addnode=146.185.135.35
addnode=155.143.193.174
addnode=158.69.245.58
addnode=159.146.116.161
addnode=167.114.103.43
addnode=172.100.149.195
addnode=172.104.156.182
addnode=174.114.74.204
addnode=174.3.144.119
addnode=176.100.71.107
addnode=176.194.62.242
addnode=178.129.90.246
addnode=178.215.98.57
addnode=178.251.222.153
addnode=179.124.10.26
addnode=179.125.97.183
addnode=179.62.97.241
addnode=180.235.33.120
addnode=184.155.209.93
addnode=184.164.129.202
addnode=184.195.73.197
addnode=185.183.99.171
addnode=185.51.187.161
addnode=185.60.147.78
addnode=185.92.223.144
addnode=188.143.58.135
addnode=188.167.144.142
addnode=188.234.176.67
addnode=188.40.78.31
addnode=195.33.213.195
addnode=201.75.10.109
addnode=203.206.160.157
addnode=203.59.236.69
addnode=204.27.59.90
addnode=210.195.255.142
addnode=211.104.154.2
addnode=211.197.11.6
addnode=212.3.130.134
addnode=213.138.83.30
addnode=213.149.102.189
addnode=213.238.102.98
addnode=213.80.223.108
addnode=23.118.79.28
addnode=27.253.50.0
addnode=31.128.224.236
addnode=31.46.80.228
addnode=37.113.252.144
addnode=46.147.193.168
addnode=46.39.230.156
addnode=5.228.233.54
addnode=51.15.164.53
addnode=52.220.28.103
addnode=59.127.206.103
addnode=60.236.52.95
addnode=60.240.73.244
addnode=62.210.110.181
addnode=66.108.15.5
addnode=68.149.134.110
addnode=68.168.176.187
addnode=68.196.244.12
addnode=70.123.136.189
addnode=71.197.2.127
addnode=71.201.209.44
addnode=73.168.84.118
addnode=73.192.150.91
addnode=73.193.229.94
addnode=73.237.102.32
addnode=73.76.16.176
addnode=73.83.37.91
addnode=73.93.57.169
addnode=74.12.138.56
addnode=75.109.71.168
addnode=77.108.125.114
addnode=78.137.5.155
addnode=78.46.227.52
addnode=79.111.10.57
addnode=79.113.31.42
addnode=79.165.206.181
addnode=79.191.155.236
addnode=80.237.29.60
addnode=80.242.85.209
addnode=81.154.133.208
addnode=82.149.3.111
addnode=82.40.170.244
addnode=83.87.39.91
addnode=84.0.232.9
addnode=84.138.129.203
addnode=85.167.102.241
addnode=85.214.152.3
addnode=86.154.242.28
addnode=86.188.50.0
addnode=86.200.44.101
addnode=87.113.210.102
addnode=87.93.66.246
addnode=88.153.26.199
addnode=88.164.70.252
addnode=88.99.226.34
addnode=88.99.5.208
addnode=89.178.1.191
addnode=89.47.15.113
addnode=91.240.208.235
addnode=93.126.95.110
addnode=94.130.19.114
addnode=95.19.130.112
addnode=95.21.108.82
addnode=95.21.110.193
addnode=95.70.43.122
addnode=95.70.92.93
Lastly, about your test swap not working, find out if you already have 6 confirmations. If not you must wait for them. If your wallet is not syncing, then your swap will definitely not work till its fully synced since your wallet isnt connected to the rest of the network. Give me feedback on telegram or slack after you try my suggestion. Please be meticulous It is @SolarisDev's utmost hope that everybody receives their coins safely in full. thus swap will proceed till the last month of this year. There is more time to get help. However if your XLR is on cryptopia then you have just a few days to swap them or else Cryptopia will delist XLR and getting your balance back through support may be difficult |
|
|
|
THis is incomplete
The External and internal IPs and external and internal ports on both of the Conf files are not clear!
Sir, what do you mean by they are not clear? Are they illegible to you? Also, where in the guide did you see internal IP and internal Port? It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it. Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup. solaris.conf should look like this rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101
masternodes.conf should look like this MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX You can find this in the guide If its about sight, you can get help from someone who can see clearly if its still not clear use 60020 for your port Join Telegram Group Chat https://t.me/solariscoinHi @schyter! Thank you so much for sharing both conf files. I used the same configuration. I have received 1 reward by now of 0.4 XLR. I dont understand why the status of MN keeps going to MISSING The whole tutorial assumes that I am running the node on the VPS and not on the local machine. If I am using my home server to run a machine to host the node, my externalIP and my VPSIP in both will be the same. I guess that might cause an issue. right? My conf files look like this Solaris.conf rpcallowip=192.168.0.1
rpcuser=aksjbdkajndkansdkjnansdasd
rpcpassword=aknsdlk;an;sdn;ansdna;nsdansdnansdjknajsndkasd
staking=1
server=1
listen=1
masternode=1
masternodeaddr=externalIP:60020
externalip=externalIP:60020
masternodeprivkey=87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb
port=60020 masternode.conf mn1 externalIP:60020 87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb 734123lj1b23jkb12lk3b1b2l3kbl1k2b3kb12kb3b132jklb13jb2kl3b1bj3lk1b2j39c5 1
# MasternodeAlias externalIP:portn masternode_privatekey Transaction_ID transaction_index Here my VPS is my server with the same IP
Can you please spot the mistake? Thank you   # Masternode status  @MaXLRd I now understand why you complained your masternode is missing Someone has stolen all your XLR. First of all, I am happy my guide worked perfectly for you Your private keys is meant to be private. You showed it to all of us when you posted your Solaris.conf without concealing your private keys It is like the password to all coins in your wallet address. I am sorry about your loss I am now seeing this. If I had seen it earlier I would have taken all the coins and return it to you |
|
|
|
THis is incomplete
The External and internal IPs and external and internal ports on both of the Conf files are not clear!
Sir, what do you mean by they are not clear? Are they illegible to you? Also, where in the guide did you see internal IP and internal Port? It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it. Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup. solaris.conf should look like this rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101
masternodes.conf should look like this MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX You can find this in the guide If its about sight, you can get help from someone who can see clearly if its still not clear use 60020 for your port Join Telegram Group Chat https://t.me/solariscoin |
|
|
|
There are detailed instructions for installing masternode?
HOW TO SETUP MASTERNODE GUIDEVery exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.
Any feedback is much appreciated, thanks!
Which kinks are you referring to? I am personally running a masternode and i have recieved 4 payouts so far.  you cannot run masternodes with coins from coinexchange currently. You need the coins of the new XEVAN chain. So you have to buy from coinexchange and swap them for the new coins before you can run a masternode  |
|
|
|
I have had my first masternode payout of 0.4 XLR A masternode setup guide will be released soon Add these nodes to you solaris.conf file addnode=77.122.49.139:60020
addnode=93.126.95.110:60020
addnode=212.24.96.87:60020
addnode=188.167.144.142:60020
addnode=37.97.175.52:60020
addnode=5.44.2.12:60020
|
|
|
|
I think today we will get further instruction from dev how to setup the masternode. I only swap 60 XLR and works smooth the swap. I will swap the rest once we will get a tutorial for masternode setup.
Its coming soon in a few hours It has to be approved by Dev. https://imgur.com/a/Xd5KS |
|
|
|
Wallet is synced alright. It is the additional data that isnt syncing (sporks) fully. Its 25% I have added the nodes to the conf file anyway. still not syncing EDIT its 50%. i guess it will fully sync soon enough Could I directly mine the wallet?
If you mean setting up masternodes with wallet then yes, but if you mean POW then no |
|
|
|
|
syncing SPORKS(sycning additional data) is stuck at 25%
|
|
|
|
Will the running of the new wallet replace the old folder in the appdata > roaming directory since the folders and wallet.dat files may have the same name? Or both wallets will safely run on the same computer?? I dont wanna mess up with my coins  |
|
|
|
GLOBAL TOKEN UPDATE There are proposals to come out with a new blockchain and wallet for GlobalToken THere is either going to be a complete swap or a snapshot will be taken to allow users to get access to new GlobalTokens on the new chain using private keys. Whatever be the case. We do not want anyone to lose a single coin so information will be made available here and on the slackBelow are some reasons for the proposal of the new chain 1. To make GLT more into a better cryptocurrency for the long term 2. To make transactions faster thus making the crypto more ideal for online retail environment 3. To make the difficulty readjust with each block rather than the initial 10 blocks 4. To make GLT more "green" by using POS predominantly through staking and masternodes rather than POW mining with ASICs which consume a lot of power/electricity which can be channeled for other home and industrial purposes 5. To introduce optional anonymization of transactions on the blockchain 6. To take the burden of the funding of the project off the community through donations by community members and rather make the project fund itself by allocating 8% of the block reward as treasury which will be controlled by masternode holders through voting for proposals and more Point 2 will be the mainstay of GlobalToken. More focus will be on making GlobalToken into a cryptocurrency that will be ideal for making smooth, fast, and secure online and offline payments If you are a seasoned developer and you can work on GlobalToken to add some unique features and capabilities to help realize this in a more pronounced way, feel free to join slack and pm me (@globalt) https://join.slack.com/t/globaltoken/shared_invite/enQtMjE4NDg4OTgyMTQ3LWMxZjVjYWM1MWEwNDJjZjNhOTcyODRmOTlkOTQ4NzNlODM2MDIxNjhlYmFkZTQ5ZDRkNTAyNTgzOTlmYmJjNjM EDITTHE INFORMATION IN THIS POST IS OBSOLETE.
LIKEWISE THE POST RIGHT BELOW. VISIT www.globaltoken.org/hardfork-info for more current information pertaining to the hardfork Thank you |
|
|
|
Nice to see you here @Iluvbitcoins , We stayed with TOR longer than we should have. I still have 25 TOR on coinexchange if it hasnt been delisted already. I started following DNR the moment Carsen conceived it as an idea |
|
|
|
There surely are many more factors too.
It was meant as a rough way to describe that the amount of locked coins is important.
We dont wanna end up like SIB vs DASH. 5K nodes that hardly pays anything and not enough coins locked up to constrict the supply.
I guess i would put my money in 1500 XLR more than 1k.
Id feel "better lock up too many and moon like fack than not lock up enough and just stay on the floor"
I agree with you. I think 1500 XLR as collateral would be ideal  |
|
|
|
For consideration:
If 1000 XLR is req. for a masternode, have you done some models on how that will model when the supply is higher?
Current supply is 538,908 XLR ?
How much % would 1000xlrmn lock up if you compare to other coins?
How many nodes will you have to have running to lock up enough coins at max supply, 10 000 000?
coin: supply: Nodes: mnCost: Locked: Node value BTC
DASH 7M 4568 1k 60% 75!
BSD 15M 323 25k 48% 2,5
SYNX 15M 642 5k 21% 0,27
NTRN 31M 260 25k 21% 0,9
CRAVE 1,3M 483 0,5K 17% 0,28
XLRnow 0,5 x 1k x 0,14
XLRfutr 10M 2000 1K 20% x
XLRfutr 10M 4000 1K 40% x
XLRfutr 10M 2000 1,5K 30% x
XLRfutr 10M 4000 1,5K 60% x
LoL... dont know if any of you understood any of that.
But i tried showing that EVEN with the same number of nodes as DASH, you wont lock up enough coins to blow the price to space.
your stats are correct, Your deductions are wrong. If you are going to do any valid comparison, it should be done on a fair grounds and not to confuse anyone who is looking at what you have posted - You have failed to consider the coins you have listed have different market caps. To put this into consideration and to bring things to level ground, you have make your calculation this way
Ratio of Masternode collateral amount : Max supply - You have considered DASH at its current supply of 7 million and you seem to be considering XLR at its max supply of 10 mill. Thats unfair
I will tell you why
Dash has about 40 to 45% of its supply in circulation. and has 4500 nodes. Lets also assume XLR has 40 to 45% of its supply cirulating making it 4.5 million.
With 4500 XLR nodes, what percentage is locked up?
Answer is 100% which is virtually impossible.
That makes a very huge lock up of XLR coins
your stats may be right but its skewed to favour your point and your deductions are wrong. Nevertheless i still think an XLR masternode should be 1500 XLR because we cant compare ourselves to the top coins like DASH yet, and second because it will take a while to climb up the coinmarketcap ladder |
|
|
|
Please verify and quote Address 1DxywguEzhNqaREsXJbQ3a6EBv4Tb9a46Z Message This is schyter on bitcointalk.org 30th September 2017 Signature H8JjX9CxHp5oM5llTPCXfJhWrqIK/gblqk/o8/ty72OHP6wH3Qee6tp5da+AT2irS+P7wI0BfE/6Nm5lDqkuiyU= |
|
|
|
|
@Keesdewit made a really great crypto and ended up limiting its use to Amsterdam
|
|
|
|
|
Show Posts
