i can't comment at the moment; im pointing speciaifally to DCR this month to see overall profitability...
which ports aren't connecting? My X11 rig in SF is mining fine right now.... so are the CPU algos.
I'm not sure.... next crash I'll see if I'm able to see it. EDIT: One is quark.... but it maybe a communication problem causing them to crash. |
|
|
|
Hello, I just arrived home and i see my miners on idle power consumption ,has something happened to the pool? i go to the pool's page and I see my miners listed but no hash rate on any of them  My miners are crashing doing the same thing. what port(s)? My DCR miner is up and running.... my SHA devices are off at the moment or on solo..... I am going to do a trial run of mining ETH on the side. Since DCR uses almost no memory; why not run them at the same time right? I got this GTX980; might as well put the fast memory to use! Ill report back the changes in hashrates of DCR, and the overall profitability increase by doing so. I'm doing multi algo. |
|
|
|
Hello, I just arrived home and i see my miners on idle power consumption ,has something happened to the pool? i go to the pool's page and I see my miners listed but no hash rate on any of them My miners are crashing doing the same thing. |
|
|
|
|
I was wondering if you are sending out some kind of hard hitting signal because my miner keeps crashing. Thx
Ps at the time of this post quark is paying 2.014
|
|
|
|
 WHEN THAT CRASH REPORT COMES UP... I WONDER HOW TO GET AROUND THAT ALL IT NEEDS I TO CLOSE THEN IT WILL MINE AUTOMATICALLY |
|
|
|
750ti cards have a coreclock of around 1100-1400 and the hashrate depends on the clock.
Optimal settings(oc) (core of around 1390)
Quark: 7mhash
Qubit: 5mhash
Lyra2v2: 5.3 mhash
X11: 3.45mhash
X13:2.6mhash
X15:2.4Mhash
Lyra2re: 1.2mhash
Neoscrypt: 240mhash (cuda 6.5 build)
Decred: 640mhash
Vcash: 1000mhash
Pentablake:32 mhash
The algos use from 40-60 watt per card if you have a platinum powersupply. You can run a 6x 750ti rig on a 500w psu, but I recomend 700+. To get the best hashrates you need to increase the tdp of your card from 38w to 65w. In the Bios or use the nvsmi tool
I normally don't release linux versions, only windows. But the decred and vcash sourcecode is available for a extra fee
@sp could u send me private 5 again. All algo's at least %10 worser then this in my miner. These aren't the true hashrates quark 6.8 mh neo .197 kh x15 2.2 ect |
|
|
|
It could be a riser problem. What motherboard do you have? It could be a fuse/cable problem how many rigs are connected to the same fuse.It could be a faulthy card. It could be a driver problem.( old drivers can crash on newer cards, and some of the newest drivers have issues too)
ON MY 2X 2 CORE RIGS NEVER ON MY 2X 4 CORE. |
|
|
|
|
This has been going on since the first time you started saying, set intensity, on the thread 5 months ago.
|
|
|
|
Its at 16 gig should I add more... set that a long time ago. 16gig is Enough.. Can you try with lower intensities? Use -X 10 , -X 11, -X 12... What is the highest that works? Ccminer -a qubit -- benchmark - X 10 1x 750ti 2 980ti 1x 970 gtx soon to be 2x 970gtx And I went through all that for a whole day. The only thing that works 90% of the time is no oc'ing no intensities no nothing but stock. I found the intensity that seemed to work cut my hashrate in half. |
|
|
|
Its at 16 gig should I add more... set that a long time ago. |
|
|
|
K reading thanks. EDIT:I already did that but looking again. ps lower the intensity on the next build... |
|
|
|
|
How much hash do you get on the 970 gtx gigabyte g1? Thx
|
|
|
|
@Sp if your doing a final build .. qubit needs intensity setting updated sp5 private.
On this computer only I have to tap into one card and and Lower the intensity to be able to use this.... so I put -d 0,1,2 -i 16 and it lowers all cards hashrates... it should be -d 0,1,2 -i 0,16,0 but that doesn't work. I'm tapping into card 1 or device 1. On all other algo's setting intensity to each card works like this -d 0,1,2 -i 0,16,0 or like this -d 0,1,2 -i 0,14,0 and works great. Setting is dependent on the algo.
I use 8gb memory on all my 6card rigs. And you should add 8-16 gb of virtual memory as well. High intensity and 6 cards require alot of system memory. When you add virtual memory remember to reeboot to get the effect. Windows 10 is no good. Use windows 8.1 or windows 7. I have run for weeks without a reeboot or crash in the sp-mod private, but I use a failover script/ miner control software as well. I have them maxed out with Hyperx 16 gig.... what exactly do you mean by adding virtual memory and how to do it plz? |
|
|
|
taskkill -t -f /im ccminer*
I start all my launch .bat's with that to avoid crashing the cards or freezing the rig in case a ccminer instance lingers around.
Very good idea.....thx bathrobehero  |
|
|
|
Agreed. In his efforts to advertise higher hashrates for certain algos on certain cards he has detsabilized
other algos and other cards.
I run my farm on my modded and optimized kernals and I make a profit. If you get crashes it might be because your powersupply is not good enough. Higher intensities can increase the power usage with 5%. Wrong. You've optimized your kernels for your farm and tell your paying customers to expect the same results with different configs. You're damned right, joblo - further, his time is not spent writing elegant/clean code, nor infrastructure that isn't buggy. I like tpruvot's work often, because he pays attention to shit. He wouldn't do like sp_ and be like, "Well, it might crash once every two days, but who the hell cares." Exactly Wolf0... tpruvot's, and djm's work are always stable on all my rigs.... never tried yours because you do AMD but I know your work is good too. @Sp if your doing a final build .. qubit needs intensity setting updated sp5 private. On this computer only I have to tap into one card and and Lower the intensity to be able to use this.... so I put -d 0,1,2 -i 16 and it lowers all cards hashrates... it should be -d 0,1,2 -i 0,16,0 but that doesn't work. I'm tapping into card 1 or device 1. On all other algo's setting intensity to each card works like this -d 0,1,2 -i 0,16,0 or like this -d 0,1,2 -i 0,14,0 and works great. Setting is dependent on the algo. I started doing CUDA - likely those builds have at least some of my code in them :3 If sp quits will you do pascal? |
|
|
|
Agreed. In his efforts to advertise higher hashrates for certain algos on certain cards he has detsabilized
other algos and other cards.
I run my farm on my modded and optimized kernals and I make a profit. If you get crashes it might be because your powersupply is not good enough. Higher intensities can increase the power usage with 5%. Wrong. You've optimized your kernels for your farm and tell your paying customers to expect the same results with different configs. You're damned right, joblo - further, his time is not spent writing elegant/clean code, nor infrastructure that isn't buggy. I like tpruvot's work often, because he pays attention to shit. He wouldn't do like sp_ and be like, "Well, it might crash once every two days, but who the hell cares." Exactly Wolf0... tpruvot's, and djm's work are always stable on all my rigs.... never tried yours because you do AMD but I know your work is good too. @Sp if your doing a final build .. qubit needs intensity setting updated sp5 private. On this computer only I have to tap into one card and and Lower the intensity to be able to use this.... so I put -d 0,1,2 -i 16 and it lowers all cards hashrates... it should be -d 0,1,2 -i 0,16,0 but that doesn't work. I'm tapping into card 1 or device 1. On all other algo's setting intensity to each card works like this -d 0,1,2 -i 0,16,0 or like this -d 0,1,2 -i 0,14,0 and works great. Setting is dependent on the algo. |
|
|
|
Agreed. In his efforts to advertise higher hashrates for certain algos on certain cards he has detsabilized
other algos and other cards.
I run my farm on my modded and optimized kernals and I make a profit. If you get crashes it might be because your powersupply is not good enough. Higher intensities can increase the power usage with 5%. Wrong. You've optimized your kernels for your farm and tell your paying customers to expect the same results with different configs. Exactly joblo exactly. And I solved the problem .... I upped the time for switching algo's to 12 seconds...10 seconds it crashed yesterday after 4 hrs .... why this works I don't know ....on my 2 core rigs only I have this problem. Both 2 core rigs are stable now. This was going on for 6 months. And now to see if it is stable with light oc'ing. |
|
|
|
When I said rise cable with molex connector I means power riser. So yes I got it. I Check for in Google to find problem with the motherboard but difficult to find who have the problem. So maybe I need to change motherboard but the motherboard have 5 port x 1 and 1 at 16x. Normaly it have to work no ?
Depends on the behavior of the pci-e ports. It really suxx to find the correct mobo for 6 cards, especially with windows. No problem with linux most of the time. BTC-pro mobo is pretty okay, and cheap too. BTC-pro mobo still needed powered risers when I used one long ago to get all GPU's working. Maybe my insensitivity was to high. But 2 molex just did not do it. There are some great powered usb risers. That is what I would use if i was building a rig ever again. For me, I usually undervolt and underclock, so I do not use too many powered risers. For the Pro BTC, I use 2 to 3 powered risers. Do you gain hash rate by under volt and under clock? |
|
|
|
Agreed. In his efforts to advertise higher hashrates for certain algos on certain cards he has detsabilized
other algos and other cards.
I run my farm on my modded and optimized kernals and I make a profit. If you get crashes it might be because your powersupply is not good enough. Higher intensities can increase the power usage with 5%. And I bet your farm doesn't use 2 core cpu's. And has nothing to do with psu because I took that card out... only using 650 watts on 1300 watt psu. |
|
|
|
SP is there an cpu priority 0 ?
I notice that every since you have this intensity and X in the build.. that maybe is what is causing my 2 core rigs to crash on changing algo's every 6 minutes or every hour doing one algo.
If I have to put intensity settings in then the hashrate goes back down to where it was before the improvements.
It only happens on my 2 core
is there an cpu priority 0 setting ? thx
How the do I get ccminer stabilized on a 2 core ?
crash ccminer crashed 10:38
11:08
ARE YOU RUNNING AN AUTO-SWITCH BATCH FILE? -- And, is NeoScrypt the problem algo? My best solution was to lower the intensity to 14, 15, or 15.3 . Neoscrypt would often run at lower performance, but Quark or X11 would run at good speed. I normally run NeoScrypt at "-i 15.7" on my headless, non-switching rigs. --scryptr Yes and it shouldn't matter..... but I'm trying one last thing.... I set the time to 10 seconds between algo's .... see if that works... so far it is... will see by tomorrow if it lasts that long then it needed that for ? Clearing the registers sound good. Or memory. Right now as I'm typing this it's switching again for the 4th time and...... it worked again. maybe problem solved but why on the 2 core only? Ps setting intensities shouldn't be what I have to do they should not be set that high by default creating instabilities ..dont need them at all never used them except for this computer to lower so I can use it 4 core... but why? It's got me ? I'm running a bat file so it can take up to 40 seconds to change algo's ... but I'm moving it to MC conf then will only take 10 seconds to switch.  thx scrypt EDIT: Sp should list every algos default intensities. |
|
|
|
|
Show Posts
