Someone might be having the issue I'm having in my garage, so here it goes:
After I've added couple more rigs to my small garage setup (now 14 1080 ti total), my garage door opener stopped working from outside. Cue in pissed wife.
Did anyone tackle an issue like that? RF interference seem to block the remote signal from outside, extending the antenna to outside did not help (it probably hurt as I did not care for the wavelength of the remote signal vs added antenna cable length)
Any solutions?
psu's may be issue not gpu rigs. get an fm radio and try to find a channel that gets interfered with whne you turn on a psu. rosewill tokamak does it. if you find out a certain psu is doing it build a faraday cage around the psu. https://en.wikipedia.org/wiki/Faraday_cagehttps://www.target.com/p/small-milk-crate-wire-basket-antique-pewter-with-copper-colored-handles-threshold-153/-/A-16251826?lnk=rec|adaptpdpexsrch|related_prods_vv|adaptpdpexsrch|16251826|0 this may work it is hit or miss
|
|
|
I'm still curious. I show this makes a dime a day.
You guys are really spending money on a dime day?
If you think most people are buying these for immediate profits, you don’t understand who is buying them and for what reason. Sidehacks 2-pac bitcoin sticks make 2 cents a day, and people are still buying them for 100 each Feel free to explain. Sure here is an explanation. I have 8 moonlander pointed at a solo ltc and Doge pool. Every single ltc and doge block made I could hit. I have a paid for pc with a paid for gpu in it. The gpu earns 1 dollar a day.. this cover all my power costs for the pc the gpu and running these sticks with 30 to 40 cents in my pocket. So if I never hit the solo blocks in 1500 days I will break even. And for the entire time I supported a small gpu pool a small ltc pool a small doge pool and the builder of these sticks.. I make plenty of money on other mining projects that I do this for shits and giggles. I also do this with sidehacks sticks. If you can afford to it you should if you cant afford it you should leave the thread alone.
|
|
|
yes we did 0.0037 for me yeah baby
|
|
|
The rude shocker answer:
only the mentally ill mine at max power.
fact not opinion so to give you an answer is pointless since only crazy people want to mine at max power.
Now do not feel bad as I have driven my Fia Forte from Howell NJ to Atlantic City at 105 miles per hour when I could safely set the cruise control at 65 miles per hour.
and my answer is yes I have melted cables at high power settings.
My advice set to 190-205 watts and no higher
Phil that is just not true. My power cost is ~$0.12 kwh and I have built spreadsheets in the past for every single algo and power %, and no matter what the out is always more money by running at 100% or higher power usage. I have always said if it works for you do it. I know maxing cards does not work for me. BTW I was looking to get you to reply to the rude statement as I don't understand how you don't kill your cards or risers maxed like you run. If cards are cheap and space is big but power available is low you will get more hash with more cards set to 60-70% I have space at the array and we did get a bunch of 1080ti hybrids at a good price. If I set them to 180-200 watts rather then 240-250 watts I can do more hash on the same power. the array caps at 30kwatts per hour. after that power is no longer free. We did get good news on the land in south jersey we may get the second array sooner then we thought. and it would be 40kwatts Not bad. 40kw is enough to power about 6.6 rigs in CA in the summer and 3 in the winter. No I am putting the 24/7 number The array will be 200kwatt devide by 5 to get 24/7 number. Of 40kwatt At soothaa yes I trolled a bit
|
|
|
thank you for the clarifications. Im using the risers that you say are bad yes, 3 of them are connected directly to sata (only 1 per psu connection) and 3 of them are connected through the 4 pin molex. They have sata, 4pin and 6 pin. Basically my soure for doing this is this post: https://forum.z.cash/t/the-facts-about-gpu-mining-electrical-specifications/19468 with some additonal googling. Im hoping to avoid sata all together, and I think I will with the new PSU. buy the other risers I linked and use pcie directly to them. most of us do this. and do not click every coin for benchmark it is really slow.
|
|
|
The rude shocker answer:
only the mentally ill mine at max power.
fact not opinion so to give you an answer is pointless since only crazy people want to mine at max power.
Now do not feel bad as I have driven my Fia Forte from Howell NJ to Atlantic City at 105 miles per hour when I could safely set the cruise control at 65 miles per hour.
and my answer is yes I have melted cables at high power settings.
My advice set to 190-205 watts and no higher
Phil that is just not true. My power cost is ~$0.12 kwh and I have built spreadsheets in the past for every single algo and power %, and no matter what the out is always more money by running at 100% or higher power usage. I have always said if it works for you do it. I know maxing cards does not work for me. BTW I was looking to get you to reply to the rude statement as I don't understand how you don't kill your cards or risers maxed like you run. If cards are cheap and space is big but power available is low you will get more hash with more cards set to 60-70% I have space at the array and we did get a bunch of 1080ti hybrids at a good price. If I set them to 180-200 watts rather then 240-250 watts I can do more hash on the same power. the array caps at 30kwatts per hour. after that power is no longer free. We did get good news on the land in south jersey we may get the second array sooner then we thought. and it would be 40kwatts
|
|
|
Afraid I'm not sure I understand your comment
If not risers then what? or are you saying that the ones I have is the prbolem
Powering 1 riser with 1 sata connection I thought was according to the guidelines?
Equihash? Thats like #9 on profitability if you check them all
So with crashing your profits are zero. Switching is a waste of money and causes crashing more often. Once you get system stable you can add a few coins to benchmark. No riser should use sata powered systems. give me a link to your riser https://www.amazon.com/dp/B076MSJQBS/ref=sxnav_sxwds-tsp_1?the one above is shit as it forces sata these are better they use 6 pin pcie https://www.amazon.com/dp/B072XGDWB3/ref=sxnav_sxwds-tsp_2?you simply do not use the adapter and use 6 pin pcie direct.
|
|
|
Hi, setting up my first rig and have a few questions. Has anybody successfully disabled the led on a gigabyte aorus 1080Ti in ubuntu 16.04? Tried Nvidia driver 384.111 and 390.25 I found these commands but neither work. nvidia-settings -a GPULogoBrightness=0 nvidia-settings --assign GPULogoBrightness=0
output: ** (nvidia-settings:6232): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files and nvidia-settings -a [gpu:0]/GPULogoBrightness=0
output: ** (nvidia-settings:6236): WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files Attribute 'GPULogoBrightness' (Z270a:0[gpu:0]) assigned value 0. -------------------------------------------------------------------------------------- Is it ok to use one pcie cable (it has two 6+2 connectors) to connect the power? The gpu has needs two 8 pin connections. The card is a 1080Ti using 250w. On some forums people have had the cable melt and recommend using two separate cables for each 8 pin power connection. My seasonic psu only came with three pcie cables. So if the above is true, I have to keep one card offline until I can get another cable Have you guys had any problems with the cable melting on 1080Ti's at max power? The rude shocker answer: only the mentally ill mine at max power.
fact not opinion so to give you an answer is pointless since only crazy people want to mine at max power.Now do not feel bad as I have driven my Fia Forte from Howell NJ to Atlantic City at 105 miles per hour when I could safely set the cruise control at 65 miles per hour. and my answer is yes I have melted cables at high power settings. My advice set to 190-205 watts and no higher
|
|
|
I’d happily eat crap for the negativity I have said for this company. But they have followed the “how not to do business 101” book to a tee so far.
100% agree with you on that. Whether or not it comes out and is nice gear it was a bizarre promotion for sure
|
|
|
I ordered 2 Moonlander 2 and have them hashing. The problem is that no matter what I do one of the sticks have an error rate of 5-10%. I've tried modifying clock settings, different USB ports, different computers, powered USB hubs, etc.
One stick is <.5% error rate and the other is 5-10% consistently. I've gone as low at 600MHz and as high as 796 each with similar results.
I've purchased directly from the developer on eBay. Not sure if I have a defective unit or I need to tweak the pots maybe?
Interested to hear any ideas on how to troubleshoot this.
Try raising the memory and core voltage. Also some units do show higher error rate, but does not actually affect the hashrate (i.e. the uart controller sometimes spits out garbage, but all the "real" shares still come out properly). Are you also seeing a corresponding 5-10% drop in hashrate? So the plot thickens (well not really... I think I just have a bad device). These devices shipped with the following voltages Core: 0.714VDC Mem: 0.771VDC. I changed them to their supposed defaults listed in the first post and was able to get it to Core: 0.751 Mem: 0.854. Now the error rate is consistent with the other 2 devices, except I constantly get these errors after a few hours: [2018-02-03 10:45:24] FutureBit Write error: Permission denied [2018-02-03 10:45:24] MLD 1: ASIC has stopped hashing, attempting to restart [2018-02-03 10:45:24] FutureBit Write error: Permission denied I've dropped the frequency from 756 (where the others are running happily) to 600 and all steps in between. I've been troubleshooting this for days and keep ending with the same result no matter which USB port or hub I use. I've run this thing solo, with the other two, basically every combination I've tried gets these errors. Not sure what else to try at this point. what hub and what pc or rasp pi? I want to stress that my setup is at 832 and just runs and runs and runs and runs https://www.youtube.com/watch?v=d3rqTUNt5XI
|
|
|
Hi,
I'm running a 6 GPU 1080 ti mining rigg. Asrock 110 pro btc motherboard. i have 1x 1300 w for risers and 4 GPU and one 750 W for the last two cards (and their risers also).
Now I have dialed back the GPU's to 75% tdp and with 0 overclocking as I'm waiting on better PSU's and the 750 w will go to the 1060 rigg, and be replaced by a 1000w watt. That way I will end with 3 cards on each PSU. Currently all cards are running below 200W.
Now things was stable for maybe a week, but lately the rigg is struggeling alot, its crashing several times a day and the worst part of it is actually the rebenchmarking that nicehash runs every time. I just dont understand why it has to do the benchmark all over again and I takes forever. Then its up again.
The risers are V008, and all the lights indicate that everything is fine. I have 1 sata per card and 2 on the molex. If it was just 1 card having to the benchmark again I would check the risers, but it's all of them. Pagefile set to close to 100gb ssd etc
Regardless I'm open to suggestions and tips in the search for a stable rigg. Currently stuck and waiting on new PSU hoping that's the solution.. but it might not be...
risers = garbage sata power risers = junk turn the units down to 60% tdp and only check equihash to benchmark
|
|
|
Good for you. I hope you realize how lucky you are to find such idiots to pay that kind of money for a soon to be "old technology" machine that is swamping the network just prior to a new technology release. While price goes down and difficulty goes up all these morons that buy from resellers are going to get their ass handed to them. It sure is fun to watch human stupidity.
You are being rude to the op. If people want to pay 3000 plus let the op have his day.
|
|
|
soldI have 1 s-9 all 3 boards working does 12-13 th. It is mining below I will go to Solar Array on Monday bring it home and clean it up. It can ship on Tues to the USA. I am asking for $2222.22 in btc or ltc or zec or bch No lowball offers
|
|
|
Mining is already dead to the people who are paying for a gpu any price above msrp, for the others mining still surviving but not sure if it survives this year. The thread I created is an example of how my sentiment is concerning mining and it has never been this bad. Right now eth gives only $1.20 per card and if the difficulty keeps rising then soon will be $0.50 and then 0.
1 free advice there is a world outside of eth...im still doing ~3.5-4$ day / rx 580 whatcha mining? That's always the real question; cause the second a horde jumps on the smae algo/coins you are mining; bam... hit in profits lost.... Kinda sad, but true. Best advice: Try many algos, see what ones have coins that pay well and which algo is the most efficient when it comes to that notion. Last year around August/September; it was Skien for my GTX 10 series cards... right now, its different..... But definitely not an algo that the masses are mining. I am still pulling over $300/mo with the equivalent of 2x 1070 in hashrate on one account. yep there are smaller coins here and there. and zec still pays decent for a 1080ti https://www.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje0.0045 btc for 9 1080ti or 0.0005btc for 1 1080ti pulling 5 kwatts a day my winter power = 10 cents so 50cents a day and 0.0005 btc = 4.30 - .50 = 3.80 profit for each card Since the card is paid for I can mine and hold.
|
|
|
I have stayed loyal but this is pushing me a bit too much.
|
|
|
Hey they said they were paying 10 % on the 2nd of feb. did anyone get coin. https://www.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjeall my numbers are pending for a day 0 fucking coin. Repayment program × Current status Original Old Balance: 0.02658380 BTC Reimbursed pending: 0.00265838 BTC Reimbursed by now: 0.00000000 BTC Still to repay: 0.02392542 BTC Disclaimer: By reimbursing of your old balance, NICEHASH d.o.o. does not, in any way or by any means, assume liability for the damages occurred Yeah Phillip, I did. thank you
|
|
|
Even more interesting, I have received two withdrawal emails that total far more than my balance, unless they are accessing my pre-December hack balance.
This should be an interesting conversation if Nicehash answers
well I have no payment on my 3 accounts from yesterday here is my thread https://bitcointalk.org/index.php?topic=2877330.msg29557191#msg29557191all three say I am pending these were all non nicehash accounts
|
|
|
First payment due Feb 2nd First account-------- https://www.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjeRepayment program × Current status Original Old Balance: 0.02658380 BTC Reimbursed pending: 0.00265838 BTC Reimbursed by now: 0.00000000 BTC Still to repay: 0.02392542 BTC Disclaimer: By reimbursing of your old balance, NICEHASH d.o.o. does not, in any way or by any means, assume liability for the damages occurred because of NiceHash security breach on December 6, 2017 _______________________________________________________________________________ Second account https://www.nicehash.com/miner/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJrRepayment program × Current status Original Old Balance: 0.03668450 BTC Reimbursed pending: 0.00366845 BTC Reimbursed by now: 0.00000000 BTC Still to repay: 0.03301605 BTC Disclaimer: By reimbursing of your old balance, NICEHASH d.o.o. does not, in any way or by any means, assume liability for the damages occurred because of NiceHash security breach on December 6, 2017. _______________________________________________________________________________ _ third account https://www.nicehash.com/miner/146UJM5kgzLVUV23CXCf33KQKHckoX1gx3Repayment program × Current status Original Old Balance: 0.00911800 BTC Reimbursed pending: 0.00091180 BTC Reimbursed by now: 0.00000000 BTC Still to repay: 0.00820620 BTC Disclaimer: By reimbursing of your old balance, NICEHASH d.o.o. does not, in any way or by any means, assume liability for the damages occurred because of NiceHash security breach on December 6, 2017. My pending money has been pending a whole day. about 0.0072 btc
|
|
|
Hey they said they were paying 10 % on the 2nd of feb. did anyone get coin. https://www.nicehash.com/miner/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjeall my numbers are pending for a day 0 fucking coin. Repayment program × Current status Original Old Balance: 0.02658380 BTC Reimbursed pending: 0.00265838 BTC Reimbursed by now: 0.00000000 BTC Still to repay: 0.02392542 BTC Disclaimer: By reimbursing of your old balance, NICEHASH d.o.o. does not, in any way or by any means, assume liability for the damages occurred
|
|
|
Hi everybody! We invite monero miners to the digging! black-pool.net Fee promotion - only 0.1% to end of February 2018 !!! Let's start good mining If you have any ideas for work, new functionalities or corrections, go ahead and write! We will develop this pool project Greetings from all and we wish you successful digging and trade! I asked for this to be moved to the alt coin section
|
|
|
|