Not sure how escrow works, but would really prefer fiat if you can do that.
How many PSU's did you want? I have spare parts to help you complete more adapters if you want, and can include them if you want more than one PSU.
Just one PSU with 6 PCI-E Cables. |
|
|
|
Not sure how escrow works, but would really prefer fiat if you can do that.
How many PSU's did you want? I have spare parts to help you complete more adapters if you want, and can include them if you want more than one PSU.
Escrow through OGNasty works like this: 1) I pay OGNasty the $50 for the PSUc; copy both you and him on the PM; 2) You ship the PSU to me copying OGNasty with the tracking info; 3) Once the PSU has been delivered and working I let OGNasty know that he can release the escrow to you. Here is the link to his escrow thread. |
|
|
|
I didn't find it on the first page and the post I found was locked , so I ask... How do I reset an s1?
I thought like any other device on power hold the s2 button and hope for some indication that its reset.
Is there another button or am I missing another button somewhere
There should be a push button on the control module that will reset it back to factory settings. Here you go: https://bitcointalk.org/index.php?topic=554571.msg6042428#msg6042428 |
|
|
|
I only have 3 PCIe cables attached in the pic, but I can include a few more. This PSU should easily support 3 GPUs at full power.
Cool, if you can include the extra cables, I'll take it for asking price shipped to 92801. Escrow through OGNasty, I'll pay the fee. If this works with you, PM me your address and I'll escrow with OGnasty later this afternoon PST, I'm at work right now. |
|
|
|
Oops, ught, this is what I get for posting stuff after packing it all up...
It's actually an HP DPS-800GB. I also lowered the price.
Can you post some pictures of the server psu and board. Will this come with the pcie cables? |
|
|
|
One last question.
Is it possible to solo mine into a wallet on another computer with this?
I am trying to solo mine the Trinity from Rig A (with miner) to Rig B (with wallet). I keep getting on the Status- Dead under the Miner Status Tab.
I'm not the best person to ask for that, though there are some threads on here that can help you out. No link provided, I have seen them in the past. |
|
|
|
Any price drop on the LEPA?
I'll let it go for $120. It's a great PSU in perfect condition. $120 is a steal. Alright, let me think about it for a few days. |
|
|
|
What's the word on board supply?
Spoke to the factory this morning. Still on track for delivery for August 15th, 1 week from today. Great news! Thanks for getting back to me. How many boards are you looking at? |
|
|
|
|
Joined today s0br. Thanks for the heads up, when my Miners come off of the rental, they'll be here.
|
|
|
|
|
What's the word on board supply?
|
|
|
|
Have there been any new miners forks or updates of existing miner software, since the last one that boosted X11 and X13 by a lot? It's so hard to keep track of anything in crypto nowadays.
I also would like to know anymore updates to X11 I've had some decent luck using the SGMINER 5 daily from NiceHash. |
|
|
|
I have finally connected my miner to my network and set up the miner config page but my stupid question what do I do to get it started?
I have a green light that comes on periodically but it doesn't stay flashing. Is my config set wrong?
I have
Pool 1: stratum+tcp://pool.mycryptoco.in:50150
Pool1 Worker: wallet address
Pool1 Password: x
What coin are you mining?? have you tried another pool? Sorry at work. Was trying Trinity Coin. But I didn't have a chance to try another pool but I did set up Pool 2 for a different coin and pool. Based upon their settings, that was the correct information. Did you check the system log? I know where to look but not what I am looking for. I literally just got this yesterday and have never used one before.
EDIT: The last date in my system log looks like this:
Wed Dec 31 18:00:11 1969 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Aug 7 22:50:11 2014 cron.err crond[575]: time disparity of 357961 minutes detected
Thu Aug 7 23:15:01 2014 cron.info crond[575]: crond: USER root pid 4176 cmd /usr/bin/cgminer-monitor
After looking through some settings I see I am not on correct time and time zone so I synced that.Ok After doing that I can't log back in. Ugh. I wish this was simpler like the BFL's. Install driver and run BFG miner. Finally got everything up and going. Turns out my router ip wasn't saved correctly in the Antminer setup page. Glad to hear! |
|
|
|
|
I have an internet facing IP with my ant s1, I keep getting ddos attacks from china. A simple restart fixes this, but does any one know how I can block a specific IP within the ant software. A firewall isn't in the budget right now.
|
|
|
|
I have finally connected my miner to my network and set up the miner config page but my stupid question what do I do to get it started?
I have a green light that comes on periodically but it doesn't stay flashing. Is my config set wrong?
I have
Pool 1: stratum+tcp://pool.mycryptoco.in:50150
Pool1 Worker: wallet address
Pool1 Password: x
What coin are you mining?? have you tried another pool? Sorry at work. Was trying Trinity Coin. But I didn't have a chance to try another pool but I did set up Pool 2 for a different coin and pool. Based upon their settings, that was the correct information. Did you check the system log? |
|
|
|
You're killing your performance using I:20 and worksize:128, go down to I:17 and worksize:64
platinum4, thank you! It was a test with different intensity values, really I use 17-18. My 7850 have a little bit higher hashrate with worksize 128, than with 64. Does worksize 128 have a hidden disadvantages, for example higher reject rate, or not? If anybody interested, I obtain the following results for my 7850 (at engine clock is 1180 MHz): x11 - 2,3 Mh/s (worksize:128, I:18, gpu-threads:2) x13 - 1,8 Mh/s (worksize:128, I:17, gpu-threads:2) x15 - 1,5 Mh/s (worksize:128, I:17, gpu-threads:2) Its funny. I have a bunch of 270x among a few other cards, and they run so much better @ I 16 WS 64. If I bump either one of those the hash goes down. Like with that setting I can get around 3 MH on x11 per card with those settings.... if I bump up the I.... it goes down to 2.9.... and 2.8 if I just bump up the WS... I dont know why. Thanks for that. I'll be trying that today. |
|
|
|
I have finally connected my miner to my network and set up the miner config page but my stupid question what do I do to get it started?
I have a green light that comes on periodically but it doesn't stay flashing. Is my config set wrong?
I have
Pool 1: stratum+tcp://pool.mycryptoco.in:50150
Pool1 Worker: wallet address
Pool1 Password: x
What coin are you mining?? have you tried another pool? |
|
|
|
Question guys.
With 218.75 and 225 its necessary to use 4 PCIE? Or with just 2 PCIE its ok?? For 218.75 im sure i can just use 2 PCIE, but for 225 frequency im not that sure.
right now i have 4 PCIE for both, 716W total
I've heard you can do it with two cables, just make sure they aren't getting too hot. As is hot to the touch. |
|
|
|
|
Got any CoolerMaster's left??
|
|
|
|
|
Any price drop on the LEPA?
|
|
|
|
|
BTW, I'm a n00b when it comes to building in linux, so I can only test the windows version.
I'm at a 4% increase on X11, 7% on X13 and 15% on NIST 5.
|
|
|
|
|
Show Posts
