So Im going to wait for the official word from spots that Bittrex has swapped the wallet, and then I will withdraw from Bittrtex
Vegas
or the official word from Bittrex; i think Spots has had enough, he might not be watching, lol |
|
|
|
WHAT? Link to new wallet?? CAREFUL...it's not the same as SPOTS posted. If I'm wrong i apologize, but i fell for this once... lost a lot of coins.... JUST LOOK BEFORE YOU LEAP |
|
|
|
Hello, I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder. But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed. So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks. The important question is have you sent the money before the switch? IF afterwards it does not matter and money is still in encrypted wallet. Documentation was written before the switch and presented option of transferring money to unencrypted wallet. But now this option does not exist anymore. I have updated docs to present current options. So in this situation, our coins are lost? My old wallet was encrypted, i sent the coins to unencrypted wallet, and then used the -salvage function..things worked fine, except my coin balance is 0 instead of what it should be. So I think what you just said indicates that for us with previously encrypted wallets, who haven't moved the coins BEFORE now have in effect lost them. Correct? Thank you in advance for this clarification. Coins are still controlled by encrypted wallet. Because we did swap by ourselves there is no time limit. So do not worry. Just make sure to keep backup of encrypted wallet somewhere. Please continue with manual method https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keysOkay, I sent my coins back from my new unencrypted PoW wallet to the original encrypted PoW wallet (which contained all my coins BEFORE the switch) and tried to dumpprivkey [address] just like in the manual. Now I get error message: {"code":-4,"message":"Private key for address "my_address" is not known"} Just what the feck is going on, how can this be so hard. What should I do next? Yes, I think the instructions on the github are valid IF and ONLY IF the original POW wallet was NOT encrypted. Once we followed the instructions to send the POW coins to a new unencrypted wallet, I think the coins got hung in limbo and we are screwed. |
|
|
|
also on the new noble wallet is not getting any connections, and when it fired up (loading it on a machine that has never had noble on it) it said it was loading the 1.1.0.3 version on the splash screen that shows up while the wallet is being installed. any thoughts??
***edit, I just shut it down and restarted it after it was installed and it still shows the same mismatched version number on the start up splash screen, and it still does not connect to anyone at all. so getting it up and running is impossible for me to go salvage my coins that I invested my hash and money into. Please some one message me or something if you know how to fix this.
That's correct. The version shown on splash screen is wrong. Anyone with basic image editing skills wants to fix the splash image?What needs to happen to it? I could give it a shot. Please take the splash image from https://github.com/eagleflies/noblecoin/blob/63b7d71fd00cf0cc4b47cec97ba47e5d15a70e0d/src/qt/res/images/splash.png, update the version number and upload it somewhere. I have edited the image, and you can find it here: sorry, I don't know how to put it on Github.  |
|
|
|
Hello, I've been reading this: " https://github.com/eagleflies/noblecoin/wiki/Importing-private-keys-from-old-wallet.dat-using---salvagewallet-option " over and over again and I just don't understand the part 5. ... So to begin with, I had a PoW wallet ENCRYPTED on my PC#1 so I downloaded a new PoW wallet without encryption to my PC#2 and sent all my Nobles from my PC#1 to my new wallet on my PC#2 which is not encrypted and everything went fine. Then I back-upped my wallet.dat from the PC#2 PoW wallet and copied that wallet.dat to my PoS wallet roaming folder. But what I need to do next? Where do I put that "-salvagewallet" command? I tried to start my PoS wallet just by clicking the PoS noblecoin-qt and the program just crashed like I thought and then I added the -salvagewallet command after the noblecoin-qt.exe like this "noblecoin-qt -salvagewallet" and started it but it gave me an error report and crashed. So where do I put that -salvagewallet command or is there somewhere some salvagewallet.exe which I need to run? Thanks. The important question is have you sent the money before the switch? IF afterwards it does not matter and money is still in encrypted wallet. Documentation was written before the switch and presented option of transferring money to unencrypted wallet. But now this option does not exist anymore. I have updated docs to present current options. So in this situation, our coins are lost? My old wallet was encrypted, i sent the coins to unencrypted wallet, and then used the -salvage function..things worked fine, except my coin balance is 0 instead of what it should be. So I think what you just said indicates that for us with previously encrypted wallets, who haven't moved the coins BEFORE now have in effect lost them. Correct? Thank you in advance for this clarification. |
|
|
|
Ok, am playing with solomining.......finding blocks up the ying yang; of course there is no payout, but my question is: Is this helping in any way, or am I peeing into the wind???
Thanks!
Yes, it helps a lot, please continue doing until block 16000, right now, confirmed only you and iGotspots are mining for free, thanks guys. Strange, not finding a ton of blocks like before, but still mining, lol |
|
|
|
|
Ok, am playing with solomining.......finding blocks up the ying yang; of course there is no payout, but my question is: Is this helping in any way, or am I peeing into the wind???
Thanks!
|
|
|
|
Redownload the blockchain from start if you are on anything other than 7591 right now
I think I am ok now, synced to 7597; someone send me a few coins, I will send back in small increments, minus .001 transaction fees, lol I simply have 0 coins, so cannot help, if they cannot be mined or bought. Thanks! My addy is: e56f4oFTUneyPjQKETPnYVfwViGYuQZYT9 |
|
|
|
Beta 2 updated!I just re-uploaded the beta 2 version of "Black Pharao" with the following small fixes: - debug console doesn't close on <ENTER> any more - added "Unlock wallet" and "Lock wallet" to the "Operations" menu (only shown if the wallet is encrypted and depending on current lock state) - "Change Passphrase" only present if wallet is encrypted in "Operations" menu. - "Encrypt Wallet" only present if wallet is unencrypted in "Operations" menu Simply re-download the beta 2 version if you want those fixes, don't do it if you don't care.  Hi wurstgelee: Thanks for adding the unlock option...a lot easier than going thru the console! I see it is simply "lock/unlock", it is not an "unlock for staking", only, so the wallet is totally unlocked... is something in the works to add just "unlock for staking" ?? Thank you! |
|
|
|
|
Ok, there's just no a "click button" for it...got it!
Thank you!
|
|
|
|
The only thing I don't see is how to unlock the wallet for staking.........  |
|
|
|
|
I'm seeing something very similar with my 64 bit win 7 version 1.4.4 wallet... when i first start it, it will sync. and sit there. after 4 hours, it hasn't updated. To get it to update, i have to close and re-start the client. definitely not keeping up with things.
|
|
|
|
What version of the wallet are you currently using? Please check.
Hi..the new version is 2.1.1.1-g Thank you! |
|
|
|
UPDATE
I have processed all current payouts so far. Still waiting on everyone to come and claim their funds.
Also... PLEASE READ. There is NO POW period. This means no mining. I'm sorry if there are new users that joined thinking that we were rebooting the coin completely. Instead the Camorracoin Team was able to recover the existing balances of all the users and participating exchanges. This was done to make sure the we did not change the value of Camorracoin.
There will still be a chance for you all to mine Camorracoin in a different method using the multipool I will be releasing in a week or so. I will be doing a fund raising round on this new project that I have planned out that is helping multiple coins see more market action and also giving the miners/community the ability to "mine" select POS coins.
The Camorracoin website will be going up shortly with the correct domain name and also we will be fixing some details on the page that are not filled in. I am working quickly to get this all done but as everyone here knows you have to also do work that pays money to pay the bills. I also am working on another project Sterlingcoin that will be a part of this multipool. Spencer Lievens the wallet dev took part in developing this new Camorracoin wallet fixing some issues that were present as you all may have noticed with the first few releases not working correctly. That being said, thank you all for your patience.
When I use the new wallet, my coin balance is 0, whereas i had over 100 coins before... where'd they go? How do I get them back? Thank you |
|
|
|
|
I have read some of these recent posts, and feel I must jump in.... encrypting the wallet does not guarantee you against loss! I sense in some of the emails that we feel safe if the wallet is encrypted. NOT TOTALLY. I was a victim who had the wallet encrypted, and lost all my Maieuti coins, because apparently a keylogger read my password when I unlocked the wallet for staking... or somehow at least, the thief was able to transfer all my M coins to his wallet, even though mine was encrypted.
We have to be more vigilant, less trusting, unfortunately. PLEASE don't rely on encryption alone!!
|
|
|
|
Mortimer, my apologies...... I meant to include you in the "thank you" message...so Thanks again!!  |
|
|
|
Christmas just goes on and on...thank you again, SantaIgotSpots.... got the M coin again! |
|
|
|
|
Thanks, Mortimer!
Very kind and generous of you...appreciate the Ms very much! and of course thanks to Igotballspots for starting the nice weekend giveaway!
|
|
|
|
|
I have a simple, newby-like question maybe or maybe not related to staking: What caused (and what is the significance of) the huge drop in the stake weight, as shown on the chart in the wallet?
Thank you.
|
|
|
|
|
DEV: Us new folks go to the OP and download the client there... but unfortunately it is the old version 1.0.0.0 not the new one, so we all have issues.
Please change the link to the correct wallet.
Thank you
|
|
|
|
|
Show Posts
