Nice! So I take it, in a way was thing as OEM Warranty repair. Sans have having to ship the whole miner over to China that is  Think I'll ask about the bad board from the R4 I got early this year to see if they will do the same... So far UPS still says the repaired s9 board (batch-13) should show up at work Friday  yeah maybe you are right . it did fall in the 6 month time for warranty. and they are still sending me a little bit of coin as it mines. this time they let it build up a little higher so the fees are not as bad. |
|
|
|
[
try 3.5 sols per watt at your worst number and 4.3 per watt as your best
for founders edition cards
do tdp 70%
core 200
ram -500
fan 75%
you will be about 690 but use less power then the aorus it kind of evens out. and the aorus is big for a case.
Could you do the same advice for others nvidia ? especially 1070 (and 1060 if you remember the settings for it too) ? those are FE 1080ti settings for zcash for a 1070 itx tdp 70% core 200--------- may need to go to as low as 180 if unlucky or as high as 260 if lucky ram -500 fan 75% only had 1 1080 a zoac mini it did tdp 60-75% core 200 ram -300 fan 75% fe editions have lower clocks so + 200 core is almost certain I get some really efficient numbers with fe 1080 ti's doing zec 58% tdp 195 core -500 ram 70% the card push 4.4 sols a watt So for the 1080ti, im looking in the file and it looks like power limit is a wattage not a percent? novice question, but im trying to figure out what exactly i need to change my bad you want nvOS settings I am as new as you. but on fullzero's thread I have a discussion about 1070 cards I did 110 for each one. with 1080ti I would try 160 for each one. read on his thread what I did for my 1070's they run well now. oh 1200 usd vega's need to do 2x a 1080ti I would get 2 if they did that. 1200-1400 sols for zec at 220 watts I am in |
|
|
|
okay I am running 3 card rig I got -pl 105 for all 3 cards to work. I am pulling about 375 at the k-watt meter for 1275 sols. I had to set each gpu individually to -pl 105 I can't run xmr cpu but not much coin no worries. my bash had 11 gpus i deleted 6-10 kept 0,1,2,3,4,5 all seems okay https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjecan be viewed at link above. last one on the equihash list nvOCphiltest1 That's some good hash power. I see there are many workers in your NiceHash.com link. How many rigs are you running and what cards? I've got a 4 card 1070 rig I'm ordering 2 more GPUs right now. mostly 2x 1080ti plus 1x 1070 itx  |
|
|
|
[
try 3.5 sols per watt at your worst number and 4.3 per watt as your best
for founders edition cards
do tdp 70%
core 200
ram -500
fan 75%
you will be about 690 but use less power then the aorus it kind of evens out. and the aorus is big for a case.
Could you do the same advice for others nvidia ? especially 1070 (and 1060 if you remember the settings for it too) ? those are FE 1080ti settings for zcash for a 1070 itx tdp 70% core 200--------- may need to go to as low as 180 if unlucky or as high as 260 if lucky ram -500 fan 75% only had 1 1080 a zoac mini it did tdp 60-75% core 200 ram -300 fan 75% fe editions have lower clocks so + 200 core is almost certain I get some really efficient numbers with fe 1080 ti's doing zec 58% tdp 195 core -500 ram 70% the card push 4.4 sols a watt |
|
|
|
they told me to send it to them for repair
and today they told me it's damaged and unfixable
It's fastest 300$ i lost in my entire life
where did you send it? China? or Colorado, USA I just got a bill for mine which I sent to Colorado 25 to ship to them 175 to repair 25 to ship back = 225 cost. I am in New Jersey. They did give me some mining for the 1 board about 50 bucks but could have been more if they did 1 send of btc with 1 fee for 0.0002 instead of 4 smaller payments and 4 tx id payments of 0.0002 all in all an okay experience . Since I did not send to China USA they sent me a refund for 200 and now say board is in a transition process. "sale (Bitmain)
Jun 13, 00:36 CST
Hi Philip,
Thank you for the Paypal payment, it was billed to you by error while in transition process. $200 was fully refunded to you. We are sorry for the confusion you may have experienced!"So I do not know what will happen next? |
|
|
|
ASUS ROG STRIX Geforce GTX1080 Ti 11GB GDDR5X
Gigabyte GV-N108TGAMING OC-11GD GeForce GTX1080 Ti Gaming Series 11GB GDDR5X
EVGA GeForce GTX 1080 Ti SC Black Edition , 11GB GDDR5X , iCX Cooler and LED
EVGA GeForce GTX 1080 Ti SC2 Gaming Edition , 11GB GDDR5X
I am trying to decide between these 4 cards. I plan to buy two of them. Price is all around the same as it is slim pickings in new zealand. I already have an Aorus, I like it alot but I want to get two or three cards in one rig eventually and Aorus takes up too much space.
Any recommendations?
I might have other options but these cards I can pickup today so if there is a better recommendation than those cards please post also.
can you find one with a blower style? in cases blower style are better for cooling Can get these kind. Are they also good for open air? I looked at those two and the clock speeds are lower than the others or is that not much of an issue? Same price all of them are within 30$ of each other really. ASUS GeForce GTX1080 Ti Founders Edition , 11GB GDDR5X , HDMI Have to wait 4 days to get but no drama. EVGA GeForce GTX1080 Ti Founders Edition , 11GB GDDR5X Can pickup 2 today. get the evga founders pick it up today. password can be x or any letter be sure to end the bat fill with --pec as it will show power usage. try 3.5 sols per watt at your worst number and 4.3 per watt as your best for founders edition cards do tdp 70% core 200 ram -500 fan 75% you will be about 690 but use less power then the aorus it kind of evens out. and the aorus is big for a case. all my zec is from ewbf look at my nicehash account click equihash https://www.nicehash.com/?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjeYou do not want to auto switch . This is not the time for me to explain why as I need a lot of time to show the down sides of it. |
|
|
|
I got this to work but I am mining for op with the stick
fine with sending some hash to him.
I need help to set my settings in.
I use ewbf_ 3.4b to mine at nice hash
Whatcha need help with Phil? okay I figured out settings and I am at nicehash. https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjenoVCphiltest1 have 2 questions now 1 ) how to I upgrade to ewbf_ 3.4b 2) looking to set power lower I have -pl at 100 so -pl 90 should drop power? All you have to do is install ewbf to the same location as the one he has now and it'll pick it up and run it Yes it will drop the power of all cards if you set it for all What I would do is download it. Extract it to the desktop then copy and paste it into the same folder and name it the same then onebash will run it all the same also make a copy of the original file to be safe I found the zec folder so I think I can upgrade from 3.3 to 3.4 I do not seem to be setting the power limits correctly -pl 100 ,90, 80, 70, 65 and I pull 150 watts per card Are you going close to the bottom of the bash file to set the power limit? You don't have to do it in the command line for the zec miner it'll be its own section for power limit settings Phil, if you haven't updated EWBF yet see: https://bitcointalk.org/index.php?topic=1854250.msg19579963#msg19579963with powerlimits: if using the same powerlimit for each card set: and in this block of code: if [ $POWERLIMIT == "YES" ]
then
sleep 6
#change powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
fi find the line: expect -c 'spawn sudo nvidia-smi -pl 125 and replace 125 with the desired powerlimit in watts if using the individual powerlimits for each card set: INDIVIDUAL_POWERLIMIT="YES" and in this block of code: if [ $INDIVIDUAL_POWERLIMIT == "YES" ]
then
sleep 6
#change GPU 0 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 0 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 1 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 1 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 2 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 2 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 3 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 3 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 4 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 4 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 5 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 5 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
#change GPU 6 powerlimit by changing the number after -pl to the desired wattage
expect -c 'spawn sudo nvidia-smi -i 6 -pl 125
expect "*password*:"
send "miner1\r" '
sleep 6
........ change each line: expect -c 'spawn sudo nvidia-smi -i 0 -pl 125 ( this is for GPU 0 ) expect -c 'spawn sudo nvidia-smi -i 1 -pl 125 ( this is for GPU 1 ) expect -c 'spawn sudo nvidia-smi -i 2 -pl 125 expect -c 'spawn sudo nvidia-smi -i 3 -pl 125 expect -c 'spawn sudo nvidia-smi -i 4 -pl 125 expect -c 'spawn sudo nvidia-smi -i 5 -pl 125 ( this is for GPU 5 ) to the desired powerlimit. Note: the indexing of the GPUs might be different than you expect. If you open the guake terminal; press f12 and enter: It should list your cards in the correct order. okay I am running 3 card rig I got -pl 105 for all 3 cards to work. I am pulling about 375 at the k-watt meter for 1275 sols. I had to set each gpu individually to -pl 105 I can't run xmr cpu but not much coin no worries. my bash had 11 gpus i deleted 6-10 kept 0,1,2,3,4,5 all seems okay https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtjecan be viewed at link above. last one on the equihash list nvOCphiltest1 |
|
|
|
ASUS ROG STRIX Geforce GTX1080 Ti 11GB GDDR5X
Gigabyte GV-N108TGAMING OC-11GD GeForce GTX1080 Ti Gaming Series 11GB GDDR5X
EVGA GeForce GTX 1080 Ti SC Black Edition , 11GB GDDR5X , iCX Cooler and LED
EVGA GeForce GTX 1080 Ti SC2 Gaming Edition , 11GB GDDR5X
I am trying to decide between these 4 cards. I plan to buy two of them. Price is all around the same as it is slim pickings in new zealand. I already have an Aorus, I like it alot but I want to get two or three cards in one rig eventually and Aorus takes up too much space.
Any recommendations?
I might have other options but these cards I can pickup today so if there is a better recommendation than those cards please post also.
can you find one with a blower style? in cases blower style are better for cooling |
|
|
|
Good afternoon, fellas!
Please help me resolve the following problem:
Motherboard: Asus prime z270-p
Graphic cards: Gigybite GeForce gtx 1070 (x6)
Problem:
I launch the benchmark Nicehash, the first GPU is shown to work correctly with all algorithms, the second with only a half, the rest of GPU work only with dagger hashimoto. I have tried to reset computer anf download drivers but none of this has helped. The most surprising thing is that the very first time I have launched the benchmark 5 of 6 GPU worked perfectly. So it is obvious that all graphic cards are fine. And the problem is with something else (Nicehash itself perhaps).
Thanks in advance to those willing to help.
don't use that software. use ewbf_ 3.3 or 3.4 |
|
|
|
|
they will not be for a small guy. they will be in panda miner type pc's maybe 8-10 card units.
I simply don't see them selling to a small guy.
|
|
|
|
|
75c is a good safe temp for the max setting of your gpu's
|
|
|
|
I am pretty sure the answer is 200-250w per card..
But if I plan on running 1080ti's at 70% what is there per card wattage?
Trying to figure out how many cards I can run off a Evga GC 850w/Corsair AX850 or if I should upgrade to a 1000w like a RMX 1000w.
Just got the 850w from Microcenter and I can return it within 30days.
I have (2) 1080ti Founders and I am thinking if mining stays profitable I would eventually get more..
I have an Asus z270 AR which can hold up to 7 boards if I put them on risers.
I doubt I would ever go higher an 4-5.. Realistically I won't go past 3, but who knows.
Thoughts?
you can do 3 cards on a 850 watter. 4 if you clock at 60-70 tdp. and once you go over 80 tdp it is pretty much wasting power. |
|
|
|
Hi everyone. I'm new here I hope to find the solution to the problem that kept me awake for several nights..  I've been reading a lot about different rig configuration and I came out with this one: MoBo: Biostar Motherboard TB250-BTC CPU: Intel Celeron G3900 2.8 GHz LGA1151 2 MB Cache GPU: EVGA Nvidia GeForce GTX 1070 SC Gaming 8 GB ACX 3.0 RAM: HyperX FURY 8 GB (2 x 4 GB) 2133 MHz DDR4 CL14 DIMM PoS: EVGA Supernova 1000 W 80 Plus Modular Gold G1 The GPUs are 2 or 3 in the beginning but I will add one every month (hopefully) until I have all of the 6 slot full. I didn't mention all the cables, extender, cpu cooler and eventual extra fan but I know I have to buy them. The second similar version is: MoBo: ASRock H81 Pro BTC Motherboard CPU: Intel Celeron G1840 Processor 2.8 GHz LGA1150 GPU: EVGA Nvidia GeForce GTX 1070 SC Gaming 8 GB ACX 3.0 RAM: HyperX FURY 8 GB (2 x 4 GB) DDR3 1866 MHz CL10 DIMM PoS: EVGA Supernova 1000 W 80 Plus Modular Gold G1 Any opinion? Should it works? Suggestions accepted!  Thanks in advance to all! I like the bio star but the cpu should be a better one and you can get away with 1 stick of ram. I use these http://www.ebay.com/itm/SR2L1-Intel-Intel-Core-i5-6400T-Processor-for-V230ICUT-07-All-In-One-Desktop-/142408684804?any cooler will do. I mine with the cpu xmr pays for itself http://www.ebay.com/itm/SILVERSTONE-NT09-115X-92mm-CPU-Cooler-/381679134570?hash=item58ddd9676a:g:e~MAAOSw-4BXapCd |
|
|
|
I got this to work but I am mining for op with the stick
fine with sending some hash to him.
I need help to set my settings in.
I use ewbf_ 3.4b to mine at nice hash
Whatcha need help with Phil? okay I figured out settings and I am at nicehash. https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjenoVCphiltest1 have 2 questions now 1 ) how to I upgrade to ewbf_ 3.4b 2) looking to set power lower I have -pl at 100 so -pl 90 should drop power? All you have to do is install ewbf to the same location as the one he has now and it'll pick it up and run it Yes it will drop the power of all cards if you set it for all What I would do is download it. Extract it to the desktop then copy and paste it into the same folder and name it the same then onebash will run it all the same also make a copy of the original file to be safe I found the zec folder so I think I can upgrade from 3.3 to 3.4 I do not seem to be setting the power limits correctly -pl 100 ,90, 80, 70, 65 and I pull 150 watts per card |
|
|
|
I got this to work but I am mining for op with the stick
fine with sending some hash to him.
I need help to set my settings in.
I use ewbf_ 3.4b to mine at nice hash
Whatcha need help with Phil? okay I figured out settings and I am at nicehash. https://www.nicehash.com/index.jsp?p=miners&addr=1JdC6Xg3ajT3rge3FgPNSYYFpmf53VbtjenoVCphiltest1 have 2 questions now 1 ) how to I upgrade to ewbf_ 3.4b 2) looking to set power lower I have -pl at 100 so -pl 90 should drop power? |
|
|
|
|
I got this to work but I am mining for op with the stick
fine with sending some hash to him.
I need help to set my settings in.
I use ewbf_ 3.4b to mine at nice hash
|
|
|
|
$288 for a second hand 1080 Founders Edition
It looks like nvidia's own FE... anyone have experience with the performance of this?
if you do zec with ebwf_ 3.4b it can do 480 to 550 sols. |
|
|
|
hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?
my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti 64 C 206 W 753 Sol/s 3.66 Sol/W
2.GeForce GTX 1080 Ti 61 C 208 W 752 Sol/s 3.62 Sol/W
3.GeForce GTX 1080 Ti 58 C 206 W 753 Sol/s 3.66 Sol/W
4.GeForce GTX 1080 Ti 65 C 204 W 724 Sol/s 3.51 Sol/W
PCIx Lane speed? x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ? why would you raise to 100% would you drive your card with the speedometer pinned to the max 24/7/365? your 4 cards are doing well at 208 watts you get 753 sol/s and one is lower |
|
|
|
Out of curiosity.
The S9 has been on the market for sometime now. I am wondering it is the limitation of hashing hardware/power or it is possible to got higher than 13.5TH but not releasing it for some reasons...
yes the limit is imposed for psu size. no more complex then that. and since it is far more efficient then any other miner they are going with it. Finally they make a fortune with the s-7 on hashnest so they will do status quo until someone else brings out a 20th 1200 watt unit. their s-7 division is a solid money maker for them  |
|
|
|
|
Show Posts
