If you use all 5 of the S1's they can be overclocked to 200GH/s  which = 1Th/s

I had them only slightly Overclocked at 375 not the 400 in the ssh settings and I was still getting close to a TH/s .

Thanks!

OK, so I'm gonna sell them individually since no one seems to want all 5.

I will accept $240 each

I will also include the extra 2000 RPM exhaust fan on each unit if you'd like.

Please PM me if interested.

The 5 package will still  be available until someone purchases one of them, and I will update the thread.

Thanks!

Hi, I will entertain offers for the lot of 5 or individual S1's.
Looking for serious offers only.

Shipping from USA (east coast)

thanks!

Thanks for the math lesson,

But the package is for 5 Antminer S1's with additional 2000RPM exhast fans, plus a fan controller for the 5 fans.

Thanks!

not sold yet

shipping from where?

bump, still available, have some offers, but they are international and need to figure out shipping costs, would prefer to sell local if possible (local meaning within the US) but im open still either way.

Had an interested party, but they are not responding to PM, so they are still available.

thanks!

These are still available

These are still available

East Coast, USA

Hi, I am looking for offers for 9 Block Erupter USB 33MH/s units. Combined they perform at ~ 3GH/s

I still have the original cases they came in, and they all work perfectly.

I had them setup in a hub in this pic: https://i.imgur.com/eFhhpXQ.jpg

I am using the Hub for soimething else, but I can sell the USB fan that is in the pic if you want that as well.

Here is a pic of the Block Erupters USB's:

https://i.imgur.com/MOTvomJ.jpg

If you have any questions, feel free to ask.

Thanks!

HI,

I am selling a combo lot of 5 Antminer S1 Dual Blade miners which include 5 additional mounted 2000 rpm exhast fans on the front of each S1, to keep the unit even cooler during operation by pulling the airlow through the heatsinks faster, and a 5 fan, fan controller to control and monitor the additional fans on the front of each unit (where the heat comes out).

When overclocked you can have 1TH/s of hashing power ready to go!

The 2 power supplies are not included, but we can discuss adding them for an additional fee.

This Units are in Hand and ready to ship in their original boxes from the manufacturer!

I can also pre configure these for you prior to shipment so its plug and play ready. PM me to discuss that option.

I am asking 2.2[btc] 1.5BTC for the lot, shipping paid by buyer.

Pics:
https://i.imgur.com/FDEA8Ud.jpg
https://i.imgur.com/IGMViQ6.jpg
https://i.imgur.com/I5JbWh5.jpg
https://i.imgur.com/mshqTTq.jpg
https://i.imgur.com/JoMiypR.jpg



***EDIT***

OK, so I'm gonna sell them individually since no one seems to want all 5.
$225 each

I will also include the extra 2000 RPM exhaust fan on each unit if you'd like.

Please PM me if interested.

The 5 package will still  be available until someone purchases one of them, and I will update the thread.

Thanks!


ANTMINER S1 Dual Blades Spec

Hash rate: 180 GH/s (200GH/s overclocked)
Power consumption: about 360 W from the wall (expected 400 W if overclocked)
Power supply: 3 +12V DC input
Power efficiency:  2 W/GH/s on wall
Size:  135 mm x 155 mm x 300 mm
Network connection: Ethernet Cable / WIFI
Cooling: 12cm PWM fans and customized heat sink
 
 
ANTMINER S1 is the one of the most best Bitcoin mining rig ever.

More than 20% of the Network Hash Rate is contributed by ANTMINER S1

 
Stand alone: After you configuring it, S1 mines alone without a stratum proxy
Quiet: ANTMINER use the most power effective mining chips in the world, and the customized heat sink. All heat can be brought away by very slow wind. ANTMINER runs quietly.
Stable: ANTMINER mines 24 hours a day, without unexpected stop mining.
Accurate: Hardware Error rate as low as 0.3%, the lowest in the world.
Power effective: Saving the investment of PSU, cable and the cost of electricity bills.
  
Shipping:
Dimensions and weight are for each individual miner and not all of them as a whole. I can put them all into a large shipping box, and send it as one package, but I will have to calculate that seperately later on.
 
Warranty:

This will be a final sale non returnable not cancellable. Due to the dynamic nature of Bitcoin mining, there are no refunds, and all sales are final.
Each miner will be tested and configured and ready for use.

Make sure you buy a power cord that is at least 15 amp rated at 120
They are the thicker ones than the standard PC or monitor cables which are only 10 amp at 120 rated.

If you go with the standard 10 amp one it will probably overheat and cause problems if not worse.

Standard PSU cables are the 15 amp kind.

I hope this helps.

Does anyone have an issue where the miner turns off for no apparent reason?

It happened 2 times in 2 days, before that it was running for a bunch of days no problem.

The OS was just updated to the new changeable 3 clock speeds recently as well.

It was also noted that it would drop down to 64Mh/s or so, meaning one or two blades went out for no apparent reason, when restarting it by powering off then on, it comes bak up to full speed at 90MH/s

Is there an automatic temp cutoff somewhre? or what is the max temp it can run at?

Any ideas?

thanks!

Gods At War!

Sorry, I only have the 333 MH/s ones.

Resume sent!

I think thats a bit low. I have 9 of them with their original cases in an Anker USB 3.0 Hub with a USB fan in the 10th port of the hub blowing across all of them giving a total of 3GH/s.

https://i.imgur.com/MOTvomJ.jpg
https://i.imgur.com/eFhhpXQ.jpg

looking for a better offer.
Thanks!

I have a bunch in a usb hub, how much are you looking to pay for each of them?