Two E5-2667 V3 ES 8 core cpu's running Wolfs GPU XMR miner average ~1150 H/s .

[19:26:35] New job at diff 100002
[19:26:35] Thread 2, (CPU): 35.40H/s
[19:26:35] Thread 20, (CPU): 37.13H/s
[19:26:35] Thread 33, (CPU): 34.98H/s
[19:26:35] Thread 28, (CPU): 35.34H/s
[19:26:35] Thread 11, (CPU): 35.95H/s
[19:26:35] Thread 4, (CPU): 36.18H/s
[19:26:35] Thread 31, (CPU): 38.17H/s
[19:26:35] Thread 25, (CPU): 36.45H/s
[19:26:35] Thread 21, (CPU): 36.10H/s
[19:26:35] Thread 26, (CPU): 35.24H/s
[19:26:35] Thread 23, (CPU): 35.04H/s
[19:26:35] Thread 17, (CPU): 35.13H/s
[19:26:35] Thread 19, (CPU): 35.69H/s
[19:26:35] Thread 22, (CPU): 34.83H/s
[19:26:35] Thread 9, (CPU): 36.44H/s
[19:26:35] Thread 5, (CPU): 35.91H/s
[19:26:35] Thread 15, (CPU): 35.49H/s
[19:26:35] Thread 18, (CPU): 35.82H/s
[19:26:35] Thread 24, (CPU): 35.23H/s
[19:26:35] Thread 30, (CPU): 34.75H/s
[19:26:35] Thread 10, (CPU): 35.69H/s
[19:26:35] Thread 8, (CPU): 36.04H/s
[19:26:35] Thread 32, (CPU): 35.52H/s
[19:26:35] Thread 12, (CPU): 34.56H/s
[19:26:35] Thread 29, (CPU): 35.68H/s
[19:26:35] Thread 27, (CPU): 37.30H/s
[19:26:35] Thread 7, (CPU): 35.57H/s
[19:26:35] Thread 13, (CPU): 35.18H/s
[19:26:35] Thread 16, (CPU): 35.43H/s
[19:26:35] Thread 6, (CPU): 34.81H/s
[19:26:35] Thread 3, (CPU): 33.71H/s
[19:26:35] Thread 14, (CPU): 37.04H/s


Yes cpu's can be viable.

EDIT: Added this from the Serve The Home forum Monero performance post.

"CPU Results (wolf's) Using (MB L3 cache/ 2) for threads
4x Intel Xeon E7-8870 V3 = 2600H/s (NB drops to 2000 over time)
2x Intel Xeon E5-2699 V4 = 1723H/s
1x Intel Xeon Phi 7210 = 602H/s (case to use nproc-1)
2x Intel Xeon E5-2698 V4 = 1572H/s
2x Intel Xeon E5-2698 V3 = 1463H/s
2x Intel Xeon E5-2690 V3 = 1100H/s
2x Intel Xeon E5-2667 V3 = 1090H/s
2x Intel Xeon E5-2658 V3 = 1050H/s
2x Intel Xeon E5-2650 V4 = 1047H/s
2x Intel Xeon E5-2650L V4 = 1031H/s
2x Intel Xeon E5-2683 V3 = 1014H/s
2x Intel Xeon E5-2680 V3 = 969H/s
2x Intel Xeon E5-2670 V3 = 969H/s
2x Intel Xeon E5-2628L V4 = 897H/s
2x Intel Xeon E5-2650L V3 = 874H/s
2x Intel Xeon E5-2630 V4 = 866H/s
2x Intel Xeon E5-2670 V1 = 829H/s
2x Intel Xeon E5-2650 V1 = 750H/s
2x Intel Xeon E5-2620 V1 = 480H/s
1x Intel Xeon D-1587 = 388H/s
1x Intel Xeon E5-2630L V3 = 334H/s
1x Intel Xeon D-1541 = 242H/s
1x Intel Xeon E3-1515M V5 = 240H/s
1x Intel Xeon D-1540 = 218H/s
1x Intel Xeon E3-1220 V3 = 186H/s (case to use either nproc/2 or nproc-1)
1x Intel Xeon E3-1245 V5 = 161H/s
1x Special CPU = 153H/s (case to use nproc)
1x Intel Atom C3338 = 77H/s (case to use nproc)
1x Intel Pentium D1508 = 47H/s (case to use nproc-1)
1x Intel Atom C2358 = 18H/s (use nproc)


ARM CPU Results (thanks Fractal)
ARM Cortex A7 (Odroid-C1) 5.9H/s (no AES)
ARM Cortex A53 (Odroid-C2) 7.2 H/s (no AES)
ARM Cortex A53 (Pine64) 12.5 H/s @ 4.1W (using AES instructions, thermal limited) 3H/W

GPU Results (ccminer)
1/4x GRID M40 GPU = 220H/s
1x GRID M40 GPU = 880H/s
1x NVIDIA GTX 1070 (ASUS STRIX) = 475H/s
1x NVIDIA GTX 1060 6GB (ASUS dual fan) = 431H/s
1x NVIDIA GTX 1060 6GB (EVGA ACX single fan) = 432H/s
1x NVIDIA GTX 1050 Ti 4GB (PNY) = 297H/s
1x NVIDIA GTX 970 (ASUS STRIX) = 375H/s
1x NVIDIA GTX 750 Ti = 205 H/s (Fractal)
1x NVIDIA GRID K520 (AWS g2.2xlarge) = 164H/s
1x NVIDIA K80 (one of two GPUs AWS p2.xlarge) = 209H/s"

What do you think about free monero miner Xmr-stak-rx? if possible, can you please try and share your expert opinion on it?

As far as I know, system RAM requirements doesn't depend on DAG size. I wouldn't buy more than 4GB for this reason.

I have been trying your version of CCMiner for a bit now.  Normally I use Trex as many do, but thought it does not hurt to give it a try.  I won't know too much for an hour or 2 while the switch stabilizes and hash levels.  I do have some questions though, so I figured maybe I should ask here if that is alright.

I mine with a partner (my oldest nephew) and he is in a different part of the country.  The last 3 days we have been solo mining Zcoin at 2Miners.com.  We jump around like most miners do I suppose, but for Zcoin we always comeback to 2Miners.  Anyway, this question is specific to solo mining Zcoin and Luck. In a nutshell, my partner has found 3 blocks in these 3 days, and I have not found any.  I am actually hashing higher with about 60Mh/s and he is about 45Mh/s. Since no ones luck is that good, with less to work with. I am trying to figure it out.  Our equipment is the same, he just has less GPUs then me.  We use the same mining software (Minerstat) with as I said, the same hardware.  The single difference I can think of is networking.  He is on super fast full fiber optic at 250 Mb/s up and down.  I am on 100 Mb/s down and only 10 Mb/s up.  Since sending shares is what a miner does, his share must move like lightning and my like a slow freight train.  I think this is the reason.  What is your thoughts.

This other question I hope is right up your alley. Would you know if there is any possibility of integrating multiple GPUs where mining software sees multiple GPUs cores as if a single entity.  My though here is if that were possible, there should be a great advantage solo mining as the processing time per share should be divisible by the number of GPUs in the cluster, not considering difficulty level changes.  I admit, this is out of my somewhat shallow experience in shared computing using data/task parallelism, but if it were possible, I would have to think it may actually be quit significant in all of mining as well, not just solo mining.

That's about it.  Thanks for providing and working to improve your version of CCMiner to us miners.

-Rodger

I agree the AMD RX 400 and 500 are a pain in the ass, but my 40 AMD cards are still hashing eth 3 years and still going.  You should look at the RX 5700's Ive bought 15 open box so far for around 280 - 330.  They can make a over a dollar a day on eth, Grin 31 and 60 cents on zcoin.  That's better then a 2060 and $100 cheaper.

Anything special about the 2060 KO other then price?

Hello all ! I have a bad situation with one of my rig ! My hdd is bad and i changed it with another one (new). I installed all the drivers but when i start mining with claymore , my GPU only runs with 11 mh/s ! Before this happened they goes with 29 mh/s ( they are overclocked) What is wrong with them ? I tried to copy the bios but they said that is the same bios ... Any ideas ? Thank you in advance !

Sorry for my bad language !

https://imgur.com/nkFSH3O

Try  Current Version: 0.15.0.2 - Carbon Chamaeleon  https://web.getmonero.org/downloads/

Hey

I am coming back after I sold out at 22 satoshi after we had a fight over graphic design.

Now You fools are at 1 satoshi or 0 and daily volume 3k USD.

After all tell me now that You have made a good decision keeping all the power to overrule community vote on changes we wanted to undergo.

Now this is dust... too bad because once this was a great community but as always idiots ruined it.

Translators wanted!

https://github.com/Snowgem/ModernWalletLangPack

It's really not recommended or suggested that your warranty is not expired yet and you can't root your mobile phone to avoid losing warranty unless it expired already and your warranty is not valid anymore then it's okay to root your phone if you wanted to. It all depends on the person. I have read many replies in this thread and most are suggesting that mobile phones is not recommended to root when your mobile phone is a new model unlike the old ones which don't have full control at all or atleast some.