Miners update
- lolminer-v1.56 (Major performance increase for Flux on Nvidia Amper. Major performance increase for Beam on Nvidia Ampere. Flux and Beam on all Nvidia now uses Cuda instead of OpenCL. Slight performance improvements for Flux on AMD RX 500, RX 5000 and RX 6000 (about 0.2 it/s). Equihash coins now supports extra nonce subscription via stratum (e.g. for better profit switching pool experience). Added option --no-cl to disable detection of OpenCL GPUs (fixes a crash on some rigs where the Nvidia OpenCL driver crashes - happens mostly when having a rig with many GPUs). Disabled DAG checking for ETC mining on 4G AMD GPUs, because this was always failing (investigating to bring it back asap). Nvidia LHR cards will no longer run the LHR unlock when not mining Et(c)hash or Ergo - this will prevent them from crashing on some other algorithms)

Miners update
- bzminer-v11.0.3 (Fixed dual Kaspa duplicate shares. Fixed Ergo on AMD taking too long to generate DAG. Fixed empty worker name not using a default. Lowered default time for hung gpu, hung_gpu_ms. Fixed Rejeced shares watchdog. Added oc_reset_on_exit option. Added --nc 1 to all script files (do not write to config by default). Fixed BzMiner exit taking too long)
- miniz-v1.9z2 (Performance improvements for some AMD gpus, on Flux. Major improvement for the RX 6800 XT. Fixed issue interfering with Zano mining. Removed ‘automatic’ clock reset, on exit. Except when they are changed on the command line)
- nanominer-v3.7.1 (Reworked automatic switch ETH -> ETC after Pos. Automatic switch to ETC is off by default)
- srbminer-multi-v1.0.7 (Added algorithm 'pufferfish2bmb' (BMB - Bamboo) for GPU mining [rdna2 only]. Reduced devfee for 'autolykos2' (ERGO) to 1.00%. Possible fix for 'Can't switch to algorithm 1' issue when using --multi-algorithm-job-mode 3. Bug fixes)

Miners update
- lolminer-v1.55a (Fixed a bug causing Ergo mining not to startup on some Nvidia Rigs. Fixed a bug causing Flux mining not to startup on some Rigs with RX 400 / 500 GPUs)

Miners update
- miniz-v1.9z (Added support for Conflux – Octopus algorithm (NVIDIA). Improved support for AMD gpus. Added socks options to configuration file. Added clock reset when miniZ exits. (Nvidia RTX only). Minor bug fixes)

Miners update
- lolminer-v1.55 (Significantly improved Flux mining performance on AMD RX 5000 (+10% on 5700) and AMD RX 6000 based GPUs (+15-22%). Mining Flux, Beam, Equihash 144/5 and Equihash 192/7 will now display the iteration/s (it / s) for easier OC tuning and the pool sol/s calculated from submitted and accepted shares. Flux mining can now be selected via --algo FLUX without needing to specify --pers. Enabling Equihash 144/5 and Equihash 192/7 will now also support --pers auto instead of capital --pers AUTO for enabling pool automatic selection. Added DAG check and repair function for Ethereum Classic mining up to epoch 300. Added ETH / ETC + Kaspa code for Nvidia Pascal based GPUs.Added option to mix different Ethash style algorithms when using the fail-over pool function. To use this you now can use eth:, etc: and ubiq: as a prefix for your fail-over pool address to indicate this pool uses a different algorithm then the one configured initially. This will allow to automatically switch from Ethash to an Etchash pool when "the merge" happens as one can configure for normal Ethash mining and configure one of the fail-over pools as Etchash, so when the primary pool gets disconnected or rejects the authorization (these two are expected behavior for Eth pools after the merge), then the miner can switch to a fail-over e.g. configured to mine Etchash. See example files "mine_eth_backup_etc.sh" or "mine_eth_backup_etc.bat" on how to use it. Note: when using this feature with prefixes like tls:// or ssl://, then put the new prefix after the prefix for the communication layer. So tls://etc: is valid, while etc:tls:// is not. Fixed a bug that might cause the miner to crash when an Ergo pool connection needs to reconnect. Fixed a bug that can cause random invalid shared when mining Kaspa on AMD GPUs)

Miners update
- nanominer-v3.7.0 (Added automatic switch from ETH to ETC when ETH moves to PoS)

Miners update
- srbminer-multi-v1.0.6 (Algorithm 'xdag' is now compatible with the new XDAGj network protocol)

Miners update
- bzminer-v10.0.3-cuda11.5 (Further Improvements to Improved Eth/Etc + Kaspa hashrate (Nvidia). Improvements to dual autotune. Added --max_dual_autotune_drop option to control how much eth hashrate your willing to lose when autotuning (default 0.92). Added --disable_opencl option. useful for rigs where bzminer crashes due to amd drivers. Added --zil_only option (do not mine eth part of eth + zil). Added --log_file_verbosity option to log different verbosity to log file vs console. Increased gui console update frequency. Fixed opencl enumerating device 0:0)
- t-rex-v0.26.5 (Make LHR unlocker compatible with older drivers, e.g. 470+)

---

Miners update
- bzminer-v10.0.4 (Fixed high stale count on some eth pools when dual eth + kas)
- srbminer-multi-v1.0.5 (Added algo sha512_256d_radiant. Added ETHASH/ETCHASH + SHA512_256D_RADIANT and AUTOLYKOS2 + SHA512_256D_RADIANT dual mining. Fixed issue with dual mining ethash using nicehash mode. Added automatic caching of ZIL DAG in dual mining mode [ETH/ETC] (if GPU has enough VRAM to hold both DAG's). Added --gpu-ethash-dag-cache to set caching of specific ETH/ETC epoch in dual mining mode [ def. is epoch 0 - ZIL ])

Advanced Command update
- Fixed Reflash Command with no remember WiFi settings after reflashing.

Miners update
- lolminer-v1.54 (Fixed a bug sometimes causing duplicate send shares in Kaspa dual mining. Fixed a bug "Received a defect stratum message: conversion of data to type "b" failed" on new Kaspa pools and the solo mining adapters. Fixed a bug causing --dualworker not to work right with Kaspa dual mining)

SimpleMining images update
- SM-i057a-5.10.60-1-a20.40-r5.11.38-f21.40.1-n510.73.05.img.xz (Updated stable image. Revert back one step with NVIDIA drivers to 510.73.05 because newest one 510.85.02 do not support LHR)

SimpleMining images update
- SM-i055-5.10.60-1-a20.40-r5.11.38-f21.40.1-n510.85.02 (Updated stable image with new NVIDIA driver with some bug fixes)

Miners update
- srbminer-multi-v1.0.4 (Improved performance on all dual mineable algorithms for RDNA2 GPU's. Minor bug fixes)

Miners update
- bzminer-v10.0.2 (Improved Kaspa hashrate (Nvidia). Improved Eth/Etc + Kaspa hashrate (Nvidia). Fixed Kawpow crash bug)
- wildrig-multi-v0.32.2 (Implemented support of socks5 proxy --proxy. Improved curvehash up to 40% on RDNA/RDNA2 and up to x2 times on NVIDIA(Polaris/Vega not tested, can be better too))

Miners update
- srbminer-multi-v1.0.3 (Significantly improved performance on curvehash. Reduced devfee for kaspa and heavyhash to 0.85%. Using any of the supported dual mining combinations, automatically enables auto tune. Added possibility to disable an algorithm in dual mining mode per GPU. Default value for --gpu-dual-max-loss is lowered from 5% to 3%)

Miners update
- gminer-v3.05 (Fixed displaying of balance on 2miners pools (ETH balance when mining on BTC wallet))
- lolminer-v1.53 (Added the --max-latency parameter (see above)
  Improved efficiency of the Nvidia Eth+Kaspa dual mining solvers)

Miners update
- lolminer-v1.53-beta3 (Added Eth/Etc/Ubiq + Kaspa dual mining for AMD RX400, RX500, RX5000 and RX 6000 series. Use --dualmode KASPADUAL to request this algorithm. Requires --dualpool to be set to a Kaspa stratum pool. Slightly reduced clock demand on Ethash only for RX 5000 GPUs. Added experimental ETC+Kaspa solver for R9 285 / R9 380 (Tonga), RX Fury (Fiji) and RX 460 / 550 (Baffin) GPU. Added Eth/Etc/Ubiq + Kaspa solver for Nvidia Turing (RTX 2000, CMH) and Nvidia Ampere (RTX 3000, RTX Ax000) based GPUs)

Miners update
- gminer-v3.04 (moved to new version of balance fetching API for 2miners pools (decreased network trafic))

Miners update
- bzminer-v10.0.0 (New coin: Woodcoin. Woodcoin: cpu optimization flag "algo_opt" set to 1 for pre-processing on CPU. Dual mining: Fixed low hashrate for for LHR cards. Dual mining: Removed "empty package" errors. Dual mining: Fixed invalid ethash shares on some pools. Ixian: Fixed rejected shares issue and fixed HTTPS issue. Zil: Fixed mining zil window with nicehash eth. Added efficiency to http api /status. Disabled Kaspa dev team fee by default)

Miners update
- teamblackminer-v1.66 (Fixed SSL reconnect crash. Fixed stats hang. Added new pools)