[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tymeksm]

Miners update
- lolminer-v1.63 (Improved the Kaspa only mining performance on Nvidia Turing, Ampere and Ada GPUs by about 3.5%. Significantly improved the Kaspa only mining energy efficiency on Nvidia Turing, Ampere and Ada GPUs by 7-11% depending on the actual model. Values given to --dualfactor parameter will now be value checked and rounded / capped to working values. Fixed a bug causing the miner to show a crash message when lolMiner was ended via ctrl+c. Fixed a bug causing lolMiner not to start Kaspa mining on Nvidia GPUs when the Nvidia OpenCL installation on the system is broken)

[1714795516]

1714795516

[1714795516]

1714795516

[1714795516]

1714795516

[1714795516]

1714795516

[1714795516]

1714795516

[tymeksm]

Miners update
- teamredminer-v0.10.6 (Added fix for Kaspa mining on MiningRigRentals)

[tymeksm]

Miners update
- srbminer-multi-v1.1.3 (Fixed miner crashing on ETHASH/ETCHASH + KASPA/HEAVYHASH dual mining options that appeared in version 1.1.2. Added parameters --a0-start-script and --a1-start-script which run a user defined script every time algorithm 0 or 1 become active. Added parameter --start-script-delay which delays mining for x seconds after a0 or a1 startup script was executed)

[tymeksm]

Miners update
- miniz-v2.0a (Fixed most progpow/ethash issues. Improved invalid shares on CFX. Improved stability. Improoved autofan. Added --autoclocks option to apply auto OC settings. Added --stocksettings option to set stock settings. Added --priority option to set priority to miniZ process. "Run As Root" is required for last 3 options)
- nanominer-v3.7.6 (Added EVR coin. Fixed password vulnerability: we do not show config via API now in case of webPassword is set. Added support new name for AMD Radeon RX 550 in modern drivers)


Miners update
- lolminer-v1.64 (Improved Kaspa only mining performance. Speed increase is about 8-8.5% on Nvidia Pascal GPUs, 4.5-5% on Nvidia Turing and Ampere GPUs and 3-4% on AMD Navi and Big Navi GPUs. Beta feature: added options to set core clock offset (--coff), memory clock offset (--moff), power limit (--pl) and a fixed fan speed (--fan) on common Nvidia GPUs. Required are admin privileges and Nvidia drivers 520 or higher! The syntax is the same as with --cclk and --mclk - if a single value is given then it will be applied to all compatible GPUs, else a coma separated list of values can be given using a * character to skip over GPUs. (1) Added a new parameter --no-oc-reset to turn off the reset of overclock settings when ending the miner. (1) Note: No responsibility taken for the values set. Please use with care. If your mining os had build in functions to set these settings we recommend using them instead of the miner settings. Fixing a bug with ETHV1 (nicehash) stratum mode that may cause the worker name to be appended twice when it was given by --user . (the use of --worker did not have this issue))

[tymeksm]

Miners update
- gminer-v3.15 (Added ability to lock memory clock on Ampere and newest GPUs (--lock_mclock), useful to decrease power usage in Kaspa only mining mode. Improved Kaspa, Etc + kaspa, Ergo + Kaspa mining performance on Turing, Ampere and Ada architecture, also decreased power usage. Fixed bug with stale shares for Kaspa, Etc + kaspa, Ergo + Kaspa, this fix will significantly increase pool hashrate)


Miners update
- wildrig-multi-v0.35.0-beta (Beta release. Disabled AMD support. Fixed one more memory leak for progpows family. Implemented parameter --execute to execute different scripts on start. Implemented nexapow(5% devfee). Faster initialization for nvidia(might have some critical errors))

[tymeksm]

Miners update
- gminer-v3.16 (Improved mining performance on Kaspa, ETC + Kaspa, Ergo + Kaspa. Fixed invalid shares on Kaspa, ETC + Kaspa, Ergo + Kaspa)
- teamblackminer-v1.76 (Improved the the stratum implementation for ezil.me, hiveon.com and others (ETC/ETHW). Higher poolspeed, fewer rejects. Faster Verthash mining (Submit solution code in seperate thread). Removed job not found rejects for verthash (woolypooly.com/zerpool.com). Fixed an issue when submitting shares while validating the Dag. (AMD/NVIDIA). Fixed an issue in the zil cache for 8GB cards on AMD. Fixed set powerlimit (TDP). Fixed SSL for Nicehash and others. Updated thirdparty libraries)
- wildrig-multi-v0.35.1-beta2 (Fixed AMD support for nexapow. Improved nexapow performance up to 20% depends on gpu)

[tytanick]

ASIC support
- ASIC support has been added. This is beta release so expect bugs ! Currently this feature is free and after some unspecified time it will cost 1$ per asic device.
- ASIC Hub - this is special OS image that needs to be placed inside LAN network to gather information from ASICs devices
- Currently values are showed mostly as json structure but in future we will make it look better
- Please feel free to report any issues.
- Currently we are supporting Antminer S9, Antminer S9i, Antminer S19, Antminer S19 Pro, Antminer S19j Pro, Whatsminer M30S++. If Your asic is not on the list, please write us email with information how many ASICs you have and what models are they.

[tymeksm]

Miners update
- tt-miner-v2022.4.1 (Improved defaut hashrates for all variants of ProgPow and KawPow. Printed hashrates is discounting the devfee (printed hashrate = full hashrate - devfee hashrate) - TT-Miner shows what you the miner gets. Please note that most miners show the full hashrate that includes the devfee. For a reliable hashrate comparison use pool-hashrates after some hours/days. Optimized NiceHash support (ETCHASH, ETHASH, KAWPOW), fast DAG switching. Optimized mining to a QT-wallet, supported by most KawPow coins (known exception: TTM, ARL). New algos: Sha512256D for Radiant, EvrProgPow for Evrmore. New coins: RXD(Radiant), EVR(Evrmore), VTE(VirtualEmpire), ETHW(EthereumPOW), ETHF(EthereumFair), GSPC(GSP Coin), LAB(Labyrinth). New option daginfo - prints information about the active dag. Deletes DAG files that are older than 90 days. Deletes DAG files that were used 2 epochs ago)


SimpleMining images update
- SM-i066c-5.15.80-a21.50.2-rf22.20.3-5.16.16-nv525.60.11-u20 (New beta image. Ubuntu 20 based. Newest AMD and NVIDIA drivers. Included AMD opencl libraries version 21.50. Supports all AMD and NVIDIA GPUs including AMD BC-250, 6xxx series, NV 4080 and 4090)

[tymeksm]

Miners update
- teamblackminer-v1.77 (Reduced stale shares)


Miners update
- gminer-v3.17 (Improved Kaspa hashrate in single mining mode +5 - +7%. Improved Kaspa hashrate in dual mining mode up to +10% (ETC + KASPA, ERGO + KASPA))

[tymeksm]

Miners update
- wildrig-multi-v0.35.2-beta (Initial support of RDNA3(AMD Radeon 7900XT/XTX). Implemented skydoge. Improved devfee logic for nexapow, now it should restart the miner if it can't connect at all. Slight performance increase on nexapow(~0.5-1%))

[tymeksm]

Miners update
- wildrig-multi-v0.35.3-beta (Improved nexapow up to 40% depends on gpu)

[tymeksm]

Miners update
- srbminer-multi-v1.1.4 (Added support for gfx1100 (RDNA3 : RX 7900) GPU's (RX 7900 not supported yet by SimpleMining). Fixed hashrate regression on 'autolykos2' algorithm for Vega/Ellesmere GPU's that was introduced unintentionally in an earlier version. Renamed '--adl-disable' parameter to '--gpu-sensors-disable'. Minor bug fixes)
- tt-miner-v2022.4.2 (Fixed an issue that could cause a 'duplicate share' when using any ProgPoW/KawPow algo. Reduced miningfee for Radiant to 1%. Use Cuda 12.0)

[tymeksm]

Miners update
- gminer-v3.18 (Overclocking support --cclock, --mclock, --pl, --fan, --tfan. --lock_cclock and --lock_mclock for all Nvidia GPUs (10xx / 20xx / 30xx). Improved hashrate for Kaspa, ETC+Kaspa and Ergo+Kaspa)

[tymeksm]

Miners update
- lolminer-v1.65 (Improved Kaspa performance in ETC and ETHW dual mining by about 6-7% on AMD (Big) Navi GPUs and 10-12% on Nvidia Turing and Ampere, measured at the same Ethash speed. The actual improvement depends on the concretely selected dual factor. Re-tuning your setup is highly recommended. Improved Kaspa performance in Kaspa only mining mode by 0.6 to 1.2% on Nvidia GPUs and 0.4-0.5% on AMD (Big) Navi GPUs at approximately same power draw. Beta feature: Added experimental support for AMD RX7900 series. Supported algorithms: Et(c)hash, kHeavyHash and the corresponding dual mining. Fixed some minor display bugs)
- miniz-v2.0b

[tymeksm]

Miners update
- gminer-v3.20 (Improved DUAL mining (ETC+KASPA, Ergo+KASPA). Added ability to use fractional intensity values, which leads to higher hash rate
  Improved Ergo mining hashrate in single mining mode for 10xx and 20xx Nvidia GPUs. Improved compatibility with Kaspa pools (supports KStratum to support mining on Kaspa Node). Improved Kaspa, ETC+Kaspa, Ergo+Kaspa mining performance for GTX 10xx GPUs (up to +5% in single mining mode))
- teamredminer-v0.10.7 (Added dual ERG+KAS mining support for all supported gpus. Fixed semi-broken dual zil mining for older algos (Nimiq, Argon2, x16r, and others))

[tymeksm]

Miners update
- lolminer-v1.65a (Fixed a bug causing sometimes high number of duplicate shares on Kaspa when dual mining with ETC. Changed kaspa stratum behavior: Kaspa mining will now start only after the pool did send an authorization message. This prevents rejected shares at startup. Slightly changed dual mining tuning behavior to a mode a bit slower, but less likely to hang up the GPUs at startup)

[tymeksm]

Miners update
- added miner aleo-miner for mining ALEO (API support will be added in near future)
- added miner rigel for mining etchash (ETC), ethash (ETHW), kheavyhash (Kaspa), zil (Zilliqa) (API support will be added in near future)
- gminer-v3.21 (Supports ZIL mining via ZMP protocol: single (can be combined with KASPA mining), dual (with any supported algorithm: ETC+ZIL, ERGO+ZIL, KASPA+ZIL, RVN+ZIL, CTXC+ZIL, BTG+ZIL, ...) and triple mining mode (ETC+KASPA+ZIL / ERGO+KASPA+ZIL). to enable dual/triple ZIL mining you need specify ZIL server and ZIL wallet via --zilserver and --ziluser parameters, you may specify multiple ZIL servers (failover servers). check sample .bat/.sh files in miner archive. Improved miner stability)
- srbminer-multi-v2.0.0 (Added support for NVIDIA architectures : Pascal, Turing, Ampere, Ada Lovelace. Added parameters --disable-gpu-amd, --disable-gpu-nvidia. Added GPU OC parameters --gpu-cclock and --gpu-mclock [NVIDIA Volta and newer]. Removed kernels for dual ETHASH/ETCHASH/AUTOLYKOS2 + BLAKE3_IRONFISH)


Miners update
- aleo-miner-v1.2.5 (Effective reduction in rejection rates. Increased adaptability to 10 series graphics cards)
- teamblackminer-v1.78 (Kawpow +5% on NVIDIA. Added lib to run on amd only rigs. Option --ssl-verify-none added to disable SSL pool certificate authenticity. Reduced stale shares (Vertcoin). Fixed bug in average hashrate)

[tymeksm]

Miners update
- gminer-v3.22 (Added support of custom OC settings for ZIL mining round, to specify custom OC settings use follow commands: --zilcclock. --zilmclock, --zilpl, --zillock_cclock, --zizlock_mclock (check mine_kaspa+zil_oc.bat/.sh from archive with miner). Selects smaller solver size on GPUs thats not have enough memory to hold ZIL DAG (for Cortex, Grin32 and Aeternity))
- wildrig-multi-v0.36.0-beta (Added --execute-wait parameter. New statistics table. Improved nexapow up to 10% depends on gpu. Implemented precompute for nexapow on gpu, so RAM requirements should decrease. Improved pufferfish2 for RDNA/RDNA2. Improved nist-family hashfuncs for RDNA/RDNA2(so there should be performance increase on x16-like algorithms, skydoge and so on). Removed coin-specific algorithms that are dead already(0x10, exosis, geek, honeycomb, megamec, mtp, mtp-tcr, polytimos, renesis, sonoa, x17r, wildkeccak))


Miners update
- teamblackminer-v1.79 (Removed rejected shares Kawpow (invalid pow bug). Improved default xintensity kawpow. Removed rejects on switch between feemining Vertcoin / Kawpow)
- wildrig-multi-v0.36.1-beta (Fixed diffferent algorithms for RDNA on newer drivers. Fixed curvehash. Improved sensor handling)

[tymeksm]

Miners update
- aleo-miner-v1.2.6 (Substantial improvements of mining performance)
- gminer-v3.24 (Enable dual Kaspa mining while ZIL mining round(for Kaspa+ZIL, ETC+Kaspa+ZIL, Ergo+Kaspa+ZIL). this feature removes Kaspa hashrate drawdown while ZIL mining round, use -zildi / --zildual_intensity to changed dual intensity. Added support of mining to ZIL pools without ZMP protocol support (ezil, k1pool, ...), miner automatically detects right scheme for ZIL connection, however you can select scheme manually: zmp://, zmp+ssl://, ethproxy+tcp://, ethproxy+ssl://, stratum+tcp:// or stratum+ssl://)
- srbminer-multi-v2.0.1 (Added support for NVIDIA 'Hopper' architecture. Added NVIDIA support for algorithms : UBQHASH, DYNAMO, BLAKE3_IRONFISH. Added GPU OC parameter '--gpu-plimit' [ NVIDIA only ]. Re-added kernels for dual ETHASH/ETCHASH/AUTOLYKOS2 + BLAKE3_IRONFISH because of testnet3 [NVIDIA support added]. Fixed detection of NVIDIA GPU's. Fixed compatibility with older NVIDIA drivers. Various fixes for mining on nicehash pools / nicehash mode. Minor bug fixes)
- tt-miner-v2023.1.0 (Added option to OC core and memory of RTX and newer GPUs. This allows independend settings for regular and alternate coins. New algo Sha256DT for Novo. New coin Novo(NOVO). Changed algo of REDECOIN from Kawpow to ETHASH. Removed nVidia shared libraries from the TT-Miner package (Linux only). Linked static to nvrtc. Fixes an bug that causes invalid shares on Zano if you use -a PROGROWZ and not -coin ZANO)


Miners update
- added miner damomine-aleominer for mining ALEO (API support will be added in near future)

[tymeksm]

Miners update
- damomine-aleominer-v2.3.4 (Decrease the CPU requirements, some ETH mining machine can run Damominer directly. Improve the 3060Ti, 3080 GPU performance and pcie 1x problems)