what is the most profitable alt coin right now
everyone stop mining zr5
where are you guys
|
|
|
[2015-04-19 00:30:49] json_rpc_call failed, retry after 30 seconds [2015-04-19 00:31:40] HTTP request failed: Failed to connect to zrc.maxminers.ne t port 3331: Timed out
whas wrong with cpuminer
|
|
|
get some HW error after a few day I have try used many setting with -w -X gpuengne and memclock but still got HW error setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2 I've been gone a while - I'm not sure why that would happen only after a while, though... it's literally running the same code over and over. this happen just on gpu 0 and why auto run as admin i was used 2 sgminer to tricky gpu 0
|
|
|
still no update for windows miners
|
|
|
get some HW error after a few day I have try used many setting with -w -X gpuengne and memclock but still got HW error setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2 only use: sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -i 18 When i am home i will send u my .conf file, this because i dont put this information into the .bat file. atm i am at work till 22:00 gmt+1 trying with your setting but still get hw error, this happen after a day, before is no problem and i think i'm not the only one I'll crosspost here since I am getting no response in the mining forum:
Wolf0,
I am using the Ziftr miner on 6 different rigs. These rigs all have AMD 14.6 or 14.7 installed so I put the 15.3b drivers in your miner folder. After about 18 hours of running with no reboots (yea!) each rig has multiple hardware errors and it is ALWAYS and ONLY gpu 0. Does that mean anything to you?
I am using Tahiti cards, 1050/1500, xI 1024, w 256, g 2
Please advise. NB: running with x11 algo everytthing is normal when running whirpoolx and zr5 algo with wolf mod shows hw error and unstable hash now my PC looks something change everything running as administrator automatically >.<
|
|
|
get some HW error after a few day I have try used many setting with -w -X gpuengne and memclock but still got HW error setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2
|
|
|
Hello everyone! All read, but did not understand the procedure for the exchange of coins. If not difficult - please explain. Thank U.
The swap (exchange of the DCX coins to NXE coins) is finished more than a week ago... I suppose you cannot exchange the coins anymore. It is a pity spent my time and electricity. The only thing not clear if not read on a daily basis all sorts of crap about another innovation, then almost did not have time to exchange gold stock! That is why put the card in the pool Dark, a month has gone - and no problems. Good luck to everyone! Bye Now. That is a pity, I sent you a PM No reply I have sent you a PM
|
|
|
guys
what is the mimimum amount to withdraw in vnl sprnova pool i have 600 ++ vnl but inactive payout
|
|
|
guys
what is the mimimum amount to withdraw in maxminers pool i have 10,xx zift but inactive payout
|
|
|
So what's going on with GPU miner now? Is it released yet?
They posted on Reddit, saying they're delayed, but I don't know what caused it. Anyway, if you want some news, I was told about 3 days ago that the AMD GPU miner did about 1.7MH/s on a 280X. That miner also used a godawful amount of host memory. I say that I was told, because I didn't bother trying it. I dropped the memory usage to about 9% of what it was while I properly did the ZR5 algo. Current pushed and tested code gets around 2.8MH/s on a 7950, clocked at 1000/1250. In-development, bleeding-edge code on my HDD gets 3MH/s on the same. I tested this one on Windows myself, to ensure it worked, as many miners use Windows. Screenshot of stable(ish) version running on a 7950, 290X, and 285 (NSFW): https://ottrbutt.com/miner/zr5wolf-03242015-2.pngwaiting for public release
|
|
|
2 R280x setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1
sgminer.exe -k whirlpoolx -o stratum+tcp://vnl.suprnova.cc:1111 -u vanilla.1 -p x -w 64 -g 2 -X 4096 --no-submit-stale --gpu-powertune 20 --gpu-engine 1150 --gpu-memclock 1500 --lookup-gap 2 --expiry 1 --scan-time 1 --queue 0 first run stabil at 264 Mhs hw: 0 R: 0 temp max: 80 c 3000 rpm after a day speed unstable 261-263 hw:0 R: to much max: 90 c 2500 rpm something wrong with my gpu or this a bad network
|
|
|
You have a bigger hint than the one I gave him - it's the code I released. I'm not in the habit of giving away answers; to learn, you have to find it yourself. I appreciate your work Wolf, thanks and keep going I will try to learn harder
|
|
|
there are at least a couple very low hanging fruits for us developers to enjoy, thanks wolf0 for helping preserve the specie ;-)
Tsss! Don't tell anyone about prepatched kernels! I'm in the 600 Mh/s club: 621 on r9 290x@1100. Now wolf0 will reply "I'm at 700+"... ;-) My current results. R9 290 @ 1000MHz: 547MH/s R9 280x @ 1150MHz: 504MH/s R9 270 @ 1123MHz: 309MH/s 7990 @ 1000MHz: 438MH/s (per GPU) Just to brag a bit more, I actually had these already before Wolf's latest release. I think the Hawaii would easily be 600+ with decent clocks.. You did. Because I gave you a hint, need I remind you? Hi guys would you like to share for me
|
|
|
Missed out with news i hope i'm not to late to swap my DKC to NXE PM have send to Dev
|
|
|
warning checkpoint is to old it's a warning on my qt is any troble with that ?
|
|
|
sell DCX at least 0.04 BTC DCX or DKC which one is the right one? Wallet has DKC.... Yeah the new wallet is on the OP. ticker changed to DCX Should we change with a new wallet is old wallet have a bug/problem how about still used old wallet
|
|
|
I think it means that you're trying to spend more than you have available when you add in the network fees. Try spending 0.0001 less. And if that fails, 0.0001 less, etc. I'll have that message be more specific about how much you're short in a future release. After looking at the code, it appears that if that was the reason, it would have told you. I've added debugging to the code so future releases will put the reason for the failure in the log at least. One of the reasons for the message you're seeing is that transactions can't be bigger than 100kB in size. It seems unlikely that that is the problem unless you have hundreds of tiny outputs in your wallet from farming a faucet or something. If you're willing to help me figure out what's going on, PM me and I'll see what I can do. You're right this all come from seedtrue faucet and have many hundred transaction I was try to send just 2 clam and that message still appear i don't know what to do max balance 1.7 clam was succeed sending
|
|
|
everytime update new wallet everything is oke but tell me why this happen
|
|
|
Thanks!
I am using wolf0 bins now too but 7950 1150/1500 reaches only 3.300 and r9 290 1000/1300 reaches 4.500.
4300 for 7970 ghz is really good are you using sgminer 5.1 or another version?
P.S. hope we have still news from binpool, I have lost more than 1600 DKC there in total my R280x with wolfo bin get 4.5 and 4.6 on max setting 1120/1500
|
|
|
I have transfer balance from pool to my wallet and working smooth
my balance is 103.xx but notice show me that my wallet not staking because no mature coin
what this means
|
|
|
|