ok im getting somewere
login to ssh cd to / cd to /etc/bin and run ./miner_gate_sp20 open duplicate ssh window login as root cd /etc then run cgminer -c cgminer.conf
from there the miner will mine but still cannot acess it via dashboard/webpage
anyone got any ideas
|
|
|
ive got 2x sp20e's that come up on the network and i can ssh into but do not hash , and i cant login via the webpage This site can’t be reached
192.168.1.236 refused to connect. ive done sd recovery and its still the same , anything i can do from ssh to get back to the webpage/dashboard?
|
|
|
how much for just the 990fx would be a nice replacement for the 970fx im using on my gamming pc
|
|
|
pm me a price per sp31 shipped to 84713 plz
|
|
|
yup looks like my hosting customers r not ordering either , at 1k they would have bought but at 1400$ + shipping it makes more sense to buy the s9 which is 4.3th faster for only 200$ more
|
|
|
so who plans on getting some r4's tommrow , i have some customers ordering and drop shipping them to me for hosting tomorrow
|
|
|
yeah sorry , i only have sp20/31/35 fw , i never ran an sp10 so no need for me to ever have it.
if ur lucky maybe sidehack will have it
|
|
|
u can also reflash the firmware onto the control and this will reset everything , unfortunately i dont know were u can get the firmware from now , ill check my files but i dont believe i have the sp10fw i think i only have sp20 and 31/35
|
|
|
the pump in magicool kit died on me and i just want to pick up something cheap for now till i redo my system how do u guys feel about these ebay pumps http://www.ebay.com/itm/112083310167?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITeventually i wanna pick up some water blocks for my 280x's that replaced the 550ti's and a swiftech pump and res , but for now only the cpu is cooled just need something to get by till i decide what im going to do with it , for now i just installed my old evo 212+ air cooler back on it
|
|
|
Running for the first time a S7 that I bought last week, my niece put her fingers through the exhaust fan. A little cut in the middle finger and some tears..
It should have grill on both fans..
We have similar issues here with geckos...they're endemic, and love the heat etc. of electronics. I use a square of fiberglass screen held in place by running the corner fan screws through the fabric...no glue or anything. Works for geckos and, I imagine, for small fingers. glad i dont have that issue here , though we have lots of small lizards but none around were my farm is , however i did get the crap scared out of me by a white and black 5ft blow snake , lil fucker was tucked up with my black and white pci-e cables and i didnt see it till i was really close when i was power cycling my miners , sure glad he didnt try to stick his head in one of the fans
|
|
|
Running for the first time a S7 that I bought last week, my niece put her fingers through the exhaust fan. A little cut in the middle finger and some tears..
It should have grill on both fans..
ouch that always sucks , back when i had bfl 60's i had removed the end plates to quiet them down , stuck a finger in the fan by accident boy did that hurt and left a nice deep cut
|
|
|
price per s5? , were at in texas i may be able to have them picked up
|
|
|
prefer full units but will entertian units with only 1 working blade as i have a couple of units that need a single blade and a couple full dead units myself
let me price with shipping to 84713
I believe I have 9 I'll double check when I get home you want them all we can work something out. thanks let me know what u got
|
|
|
prefer full units but will entertian units with only 1 working blade as i have a couple of units that need a single blade and a couple full dead units myself
need price with shipping to 84713
|
|
|
Bump for DPS1200/800 boards are in stock.
I'm also working on prototypes for some hardware to assist with building GPU rigs powered from server supplies (no ATX required), which includes custom cabling. I can do 6+2 cables, splitters and adapters, and 4-Molex connections for powering GPU risers.
I also will soon have prototypes for the new Dell 750W board, which are made to take PCIe 6-pin jacks for quick cabling and can be paired to load-balance and operate from a single on/off switch very easily. This provides you with probably the cheapest reliable/reputable option to run an S7 or S9 off 120V power.
does the 1200/800 board work on the dps800gba psu?
|
|
|
quick question do i need to use a different port on my sp31's , i just recently got them and put them on the pool but hashrate jumps up and down wildly on them , as much as 1.5th per unit
all my other miners s7/neptunes/s4's,sp20's,s3's and s2's all stay fairly stable
There's no difference for an sp31 vs any of the others you have. If it's changing a lot, that could just be variance and the miner showing a short time frame for the hash rate? On the web site, on the Workers->Shift Graph page, you can view single workers also, to get an ~5 day view of their performance. Just make sure it has it's own worker name, then you can do that. Another possibility is that it's temperature related and it's an overheat, cool down, cycle. The graph should show that pretty clearly after a while. they have been on the pool for about a week now , ill check the miner itself to see if it is heat related , if it is im sure i just need to reapply thermal paste to the heatsinks , thanks to spoons crappy design that alows the heatsink to bounce up and down on the chips during shipping other then that im pretty sure its not heat related my avg temp across all miners is about 38*c from first hand experience 38c for an sp 31 is too high and would constantly power cycle and also if humidity is high it would also cycle due to a lot of data corruption errors which are viewable under the events tab, on the other hand the sp20s would work until they practically melt down. im not sure what the actual temp on my sp31's is i havent even checked yet but they are in the same racks as everything else but 38 is what most of the bitmain stuff is running at and i know thats cool for that stuff , the only thing i have noticed so far is when i first power them on they like to reset 1-2 times and then they just hum along . when i head over to my dc tonight ill check all the status pages and see what they say
|
|
|
quick question do i need to use a different port on my sp31's , i just recently got them and put them on the pool but hashrate jumps up and down wildly on them , as much as 1.5th per unit
all my other miners s7/neptunes/s4's,sp20's,s3's and s2's all stay fairly stable
There's no difference for an sp31 vs any of the others you have. If it's changing a lot, that could just be variance and the miner showing a short time frame for the hash rate? On the web site, on the Workers->Shift Graph page, you can view single workers also, to get an ~5 day view of their performance. Just make sure it has it's own worker name, then you can do that. Another possibility is that it's temperature related and it's an overheat, cool down, cycle. The graph should show that pretty clearly after a while. they have been on the pool for about a week now , ill check the miner itself to see if it is heat related , if it is im sure i just need to reapply thermal paste to the heatsinks , thanks to spoons crappy design that alows the heatsink to bounce up and down on the chips during shipping other then that im pretty sure its not heat related my avg temp across all miners is about 38*c
|
|
|
|