|
BA, I really wish you would stop the email spam, every time you delete a post I get an email and its getting annoying Smiley plus I have to take the two seconds to repost it. so now your wasting both our times because it is going right back up you bag of fucks. have you guys realized how utterly incompetent you all are yet? how people outside your firm were able to produce a working board without the how many month head start you had. everyone who works their must be incompetent out of their freaking minds! how can you really be this stupid and bad. you will never get another purchase again, I will see to that.
all my deleted posts will go back up shortly, thanks for giving them a bump so all the new people can see them and the old people can be reminded of them.
|
|
|
|
|
Also its not really a contest when you take all top spots, but I guess you have had the, "prizes" running at your location for a couple months now, are you finally ready to share them with the people who paid for them?
|
|
|
|
|
Well I have asked time and time again, what has BA actually done? They have told us that the chip was designed by a group at I think it was Versilicon then sent off for manufacturing. The backplanes had to have other teams come in to fix the issues because BA wasn't competent enough to even do that. They have outsourced every single other part, so basically, there only job has been to receive units, write software, assemble, and ship.
Now they have said, there are many factories around that they can use to assemble, and yet, this has been a total shit storm as they can't seem to get it right.
Receive parts, it has taken at least 5 different LCD companies and who knows how many companies to get the case designed (still never figured out what happened to the plastic ones). Then power supplies have had major screw ups, and apparently, now the control board (which I guess they didn't even design) isn't right. Sure doesn't sound like they got this part right.
Write software...well, look at past posts. They have continuously said that it will take "x" number of weeks to have whatever piece of software written. Units ship, and software is buggy, things don't seem to work properly, and the "surprise" which apparently is just being able to daisy chain them together (which is worthless since they didn't tell us this and anyone expecting any number of these units probably already has the infrastructure in place to handle multiple units.), still has not been released. So they can't even write software in a timely manner.
Ship...Don't even need to write anything here as I think it is pretty self evident they have fallen flat on their asses on this one.
So, that leaves customer service as what they are actually doing. I think their customer service can pretty much be classified as a joke at this point. You have a known criminal running this shady operation, and doesn't have anything better to do than counter legitimate questions with nonsense on these forums.
So I would have to say, that everything about BA has been a fail. They can barely assemble a device, much less a properly working one. I must agree with Dogie on his "F" rating of this failure of an endeavor.
Oh and BA, you keep asking me to stop and go away. Well you must not have read my terms when you accepted my order. They clearly state, that in the event of nondelivery or utter incompetence on the part of the manufacturer, I am entitled to do whatever I want, as long as it doesn't stray from the truth, in calling them out as much as necessary, up until a time that I am either satisfied or paid a bribe of 10 bitcoins. Now obviously, it is much more cleaner than that, but you get the gist. So I wish I could go away and forget you stupid asses, but since we both must abide by our ToS, it just doesn't seem like I am able to.
Good morning (I assume its your morning about now), I hope your chi isn't too effected by the utter shit storm you have created for yourselves.
|
|
|
|
|
Also its not really a contest when you take all top spots, but I guess you have had the, "prizes" running at your location for a couple months now, are you finally ready to share them with the people who paid for them?
|
|
|
|
|
Also its not really a contest when you take all top spots, but I guess you have had the, "prizes" running at your location for a couple months now, are you finally ready to share them with the people who paid for them?
|
|
|
|
Bobsag, when your ready to sell one for $100 give me a message and I will take 1 just to play with.
So can you get internet on that thing? Could I keep it in my living room and use it as a laptop?
We'll give you one for free for your effort on this forum. Please email to recycle.bin@blackarrowsoftware.com with your address and we'll dispatch once we read your message. It would still have a better chance of receiving a reply going there than most support tickets submitted by other customers. Quote from: notbatman on Today at 12:21:33 PM
TB chip conversion... 60x heatsink+fan, 15x 500W PSUs and 15x controllers (can I connect via USB to a PC instead?).
Best case scenario I'd get 6Th/s that requires an additional $3k investment. That's $8.2k total or about $1370 per Th/s, ROI in 3.5 months.
Wow, in your math even if we give you the chips for free it doesn't worth it.
Math doesn't lie, guess your shipping worthless junk. |
|
|
|
Why not just BTC mine instead?
because the same thing will happen to PETA, i dont think you guys understand? or maybe im not understanding you all Whats there to understand? These things are under the water, and something needs to be done. What I said has absolutely nothing to do with PETA in the slightest. I am saying, we need to maximize the amount of bitcoin that can be made with what is in the reinvestment fund. Our reinvestment fund will have roughly 85 bitcoins in it tomorrow that can be used in one of two ways... 1) It can be distributed as dividends to shareholders 2) It can be used to purchase things to benefit shareholders. Number 2 only makes sense if whatever you buy, will in its lifetime create more than 85 bitcoins. Now, there are many theories going around about ways this would be useful, such as buying back shares or purchasing better scrypt equipment. But I do not think either of those will produce a value of 85 bitcoins back from the investment, and as such, option number 1 above would have been better. I am saying, take those 85 bitcoins and buy SHA-256 equipment, such as the Antminer, that has a reasonable chance to make back over 85 bitcoins in its lifetime, thereby making a profit for owners. If whatever you do with those coins will not create 85+ bitcoins in the future, you might as well have just distributed them as dividends today. |
|
|
|
|
Bobsag, when your ready to sell one for $100 give me a message and I will take 1 just to play with.
So can you get internet on that thing? Could I keep it in my living room and use it as a laptop?
|
|
|
|
anyone else notice their T&C's page is still down today? coincidence or are we looking at a redraft to cover their asses on this customer data sale/loss/whoopsie, I wonder....
Better believe that as soon as it comes up we will be checking for changes. I assume a big laugh will be had by all by the end of this. |
|
|
|
I dont believe any of it. I am mortified. I hardly believe someone could spend 1200BTC on hardware that turns into this shit mess and its due to the fact they dont seem to give a fuck about the share price or the dividend.
Does anyone technically absolutely know their stuff? Does 1200BTC turn to shit like this in mining or is it me.
I went by their PETA mine and its all bollox as far as I can see. It should be generating enough and re-invested correctly to ensure maximum yield. Thats supposed to be their job not mine.
I hv lost all my savings. Thanks crypt x. You guys rock and keep it rockin.
This what they say on PETA mine so what the hell is happening?
"Strategic partnership with leading hardware designers/manufacturers means CryptX will have access to future chip developments at the most competitive rates on the market."
they have already bought another GH(from 3 to 4 now) with the reinvestment fund, but the network keeps growing quickly just how mining goes sometimes I understand that this is a scrypt project, but why not use the reinvestment fund to buy some SHA-256 equipment? It has a brighter outlook right now as difficulty adjustments are lower and ASICS are heavily introduced already, whereas, as the big companies start to ship scrypt ASICS, we will see further and further big jumps in hashrate. At least buying some SHA-256 ASICS for this project will allow a higher bitcoin stream to come in. With roughly 85 bitcoins in the reinvestment fund by tomorrow, they can purchase roughly 130 antminers S3's assuming no discount (possibly more with a discount). That would be about 57 TH/s of hashing power, which would about double our current weekly bitcoin intake and would decline at a much slower rate than what scrypt is currently doing. you guys must not follow the scene at all....  have you not heard of PETA This has absolutely nothing to do with PETA. There is about 85 bitcoins sitting in a reinvestment fund, now you tell me, is it better to buy scrypt miners or SHA-256 miners. That amount can buy roughly 57 TH/s of SHA-256 or roughly 1 GH/s of scrypt. Do the math and figure out which one will make more in its lifetime. This project has sunk pretty darn far, I think most people agree on here it is time for it to make a change, lots of suggestions have been thrown out, this is just one that I see that is a better option than what we are currently doing. |
|
|
|
I dont believe any of it. I am mortified. I hardly believe someone could spend 1200BTC on hardware that turns into this shit mess and its due to the fact they dont seem to give a fuck about the share price or the dividend.
Does anyone technically absolutely know their stuff? Does 1200BTC turn to shit like this in mining or is it me.
I went by their PETA mine and its all bollox as far as I can see. It should be generating enough and re-invested correctly to ensure maximum yield. Thats supposed to be their job not mine.
I hv lost all my savings. Thanks crypt x. You guys rock and keep it rockin.
This what they say on PETA mine so what the hell is happening?
"Strategic partnership with leading hardware designers/manufacturers means CryptX will have access to future chip developments at the most competitive rates on the market."
they have already bought another GH(from 3 to 4 now) with the reinvestment fund, but the network keeps growing quickly just how mining goes sometimes I understand that this is a scrypt project, but why not use the reinvestment fund to buy some SHA-256 equipment? It has a brighter outlook right now as difficulty adjustments are lower and ASICS are heavily introduced already, whereas, as the big companies start to ship scrypt ASICS, we will see further and further big jumps in hashrate. At least buying some SHA-256 ASICS for this project will allow a higher bitcoin stream to come in. With roughly 85 bitcoins in the reinvestment fund by tomorrow, they can purchase roughly 130 antminers S3's assuming no discount (possibly more with a discount). That would be about 57 TH/s of hashing power, which would about double our current weekly bitcoin intake and would decline at a much slower rate than what scrypt is currently doing. |
|
|
|
|
Well I have asked time and time again, what has BA actually done? They have told us that the chip was designed by a group at I think it was Versilicon then sent off for manufacturing. The backplanes had to have other teams come in to fix the issues because BA wasn't competent enough to even do that. They have outsourced every single other part, so basically, there only job has been to receive units, write software, assemble, and ship.
Now they have said, there are many factories around that they can use to assemble, and yet, this has been a total shit storm as they can't seem to get it right.
Receive parts, it has taken at least 5 different LCD companies and who knows how many companies to get the case designed (still never figured out what happened to the plastic ones). Then power supplies have had major screw ups, and apparently, now the control board (which I guess they didn't even design) isn't right. Sure doesn't sound like they got this part right.
Write software...well, look at past posts. They have continuously said that it will take "x" number of weeks to have whatever piece of software written. Units ship, and software is buggy, things don't seem to work properly, and the "surprise" which apparently is just being able to daisy chain them together (which is worthless since they didn't tell us this and anyone expecting any number of these units probably already has the infrastructure in place to handle multiple units.), still has not been released. So they can't even write software in a timely manner.
Ship...Don't even need to write anything here as I think it is pretty self evident they have fallen flat on their asses on this one.
So, that leaves customer service as what they are actually doing. I think their customer service can pretty much be classified as a joke at this point. You have a known criminal running this shady operation, and doesn't have anything better to do than counter legitimate questions with nonsense on these forums.
So I would have to say, that everything about BA has been a fail. They can barely assemble a device, much less a properly working one. I must agree with Dogie on his "F" rating of this failure of an endeavor.
Oh and BA, you keep asking me to stop and go away. Well you must not have read my terms when you accepted my order. They clearly state, that in the event of nondelivery or utter incompetence on the part of the manufacturer, I am entitled to do whatever I want, as long as it doesn't stray from the truth, in calling them out as much as necessary, up until a time that I am either satisfied or paid a bribe of 10 bitcoins. Now obviously, it is much more cleaner than that, but you get the gist. So I wish I could go away and forget you stupid asses, but since we both must abide by our ToS, it just doesn't seem like I am able to.
Good morning (I assume its your morning about now), I hope your chi isn't too effected by the utter shit storm you have created for yourselves.
|
|
|
|
|
XBTec has openly stated that they bought the mailing list from BA. Now this is either true and BA is even more worthless scum than we initially thought or it isn't and XBTec is BA under a new name. Either way, this should easily be enough to warn anyone from ordering from either company. The ethical conflicts here are priceless. Just imagine how much money BA made selling your email address to a third party! I bet it was in the tens if not hundreds of thousands of dollars.
BA, what about the privacy clauses in your ToS? So you can simply disregard them anytime you feel like it, but if someone else tries to you start calling names and playing the tough guy act? What pieces of shit you are!
Dogie, I would ask that you re review BA in your manufacturer trustworthiness guide and add this new piece of information into their score. Violating own ToS as well as privacy acts of almost any and all countries out the ass. Possibly setting up a new company to hide behind because their old name is now synonymous with shit. Not even BFL has stooped low enough to sell email addresses or hide behind a different company name. Isn't it sad when your name is now below BFL?
Also, if they are willing to sell your email address, imagine what else they sold about you? They have your address, name, credit card info if you ordered that way. It is fairly obvious they are strapped for cash and are trying by any means necessary to get some for another run of chips. Think what other information they will sell behind your back about you! It is sickening.
|
|
|
|
|
Quote
Quote from: BitCoin Operated Boy on August 06, 2014, 05:56:31 PM
How can we ship your order first if you do not let us know what order you want to be shipped?
What kind of consequences can we threaten with?
Looks like people's orders will get expedited if you file a complaint. Everyone file a complaint and refuse your miners. These scum know they are shipping worthless products otherwise they would be over the moon to have you cancel your order. They don't want it, why should you have to get it.
A perfect example of not standing behind ones own product.
|
|
|
|
|
Show Posts
