5 Clearance event SHENZHEN - CHINA, PEOPLES REPUBLIC 08:54
4 Arrived at Sort Facility SHENZHEN - CHINA, PEOPLES REPUBLIC SHENZHEN - CHINA, PEOPLES REPUBLIC 08:33
My babies are on their way  And here I am waiting for Batch 4.....  |
|
|
|
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. "sudo reboot" works for me. Thanks, working with BAMT too, and what works on that doesn't work with the pi. |
|
|
|
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. |
|
|
|
at $25 a piece I'd like 4. What would shipping be down to 92040 and do you use escrow?
Shipping would probably be about $15. |
|
|
|
What is the hash rate per unit?
Also what is the shipping cost to Utah?
Thanks:)
Hashrate is roughly 360Kh each. Shipping to Utah will depend on how many you want? You have any left? I'm in San Diego and can pick up if you're within 50 miles
Yes we have a bunch left. They are in Irvine right now and are available for local pickup. How many are you looking for? |
|
|
|
|
OP updated with pricing. To the top!
|
|
|
|
Alright .8BTC is the best I can do on these guys...thanks for the reply!
Thanks for the offer Blazed! |
|
|
|
I would take the Ant's @ .2 each for all 4
I can not tell from the picture, but do they PCI-e plugs to power them?
Current offer via PM is .9 BTC. Yes all have the 6-pin adapter. |
|
|
|
Updated OP with ANT pricing. 0.16 for antminer s1?
A bit low Alex. |
|
|
|
i know you cant use an antminer to mine scrypt coins but i'm asking what is worth buying in order to get a faster hashrate to mine scrypt coins?
or would the money be better spent on an antminer and start mining bitcoins instead?
This is not the place to learn mining, start a new topic or move over to mining discussion. |
|
|
|
Hey Everyone, my buddy is looking to sell his GPU rig. [/b]Details and pictures below: He is also looking to sell some or all of his 4 Antminer S1's, .25BTC SHIPPED they are currently overclocked to 200GH and 3 have an additional fan for the push pull configuration. The Ant's will not come with PSU's. Shipping-US Only. Paid by the buyer, will usually be USPS 2-Day Priority but may change depending on the rates and location of buyer. Location-Irvine, CA (Local Pickup Available) Payment- BTC only Escrow- Welcomed, buyer has to pay fees/tip. Pictures-Sorry for the pictures of the GPU rig, it's tight inside the cabinet.     Any questions, offers, blah blah blah PM me or post below. |
|
|
|
Was such a good campaign too. I'm gutted.  Yes, it was great while it lasted. OP, thanks for this list now that I am on the market for one. |
|
|
|
|
Thanks for testing 14.7Utah.
|
|
|
|
Quick update guys: From now on (first went out about 15min ago), payouts will be merged for all algorithms. This means two things, if you previously were mining 2+ algorithms, and receiving 2+ payouts each payout period, you will now only be receiving 1 payout (for the same total as the previous multiple). Second, the payout threshold is now cross-algo, so if you had 0.003 in X11, and 0.003 in X13, you would previously not be paid either (neither met the 0.005 requirement), now you would be paid (0.006 total meets the threshold). At the current time we're not planning on adding X15 (very few coins, and of them, very low profitability on average). I'll keep a watch on new coins, and if something does pop up we'll look into it again, but at the current time, its not worth it (for miners or the pool in general). Next up on the list are a few things. I know I've mentioned an algo-switching set of ports in the past, but there are a few more things I'd like to jump on before we do that: - Upgrades to our stratum system to support certain coins that require multiple transactions (donations normally) in the coinbase. Specifically things like Apexcoin and Marucoin (I was watching both closely, just a problem having them supported rather than missing them). Our current system only supports one payout transaction (to the pool), and these coins require 2, one to the pool, and one to a donation address (which is either a percent, or a hard amount of coins). So upgrading our stratum endpoints will allow us to add those types of coins in the future (should only take a few days I think). - Tuning of the profit switcher. For the longest time it has been working great, with extremely few tweaks (in Jan-March we were tweaking it every 12 hours to optimize), and we haven't needed to touch it in a long time. I'd like to take a few days to give it another look and see how it can be optimized for the new coin landscape (not sure exactly what this means, need to look into it first), but I think there are some things in there we could do to increase profitability a bit. After that, I think its probably on to the multi-algo auto-switcher. Sorry to bump it back, just some things that I think need handled before we get to it Thanks PW!!! Good news, I will be anxiouly awaiting the tweaks and algo switcher. |
|
|
|
|
Sad news indeed. However, it was a great experience for my first sig campaign here. I can only hope that my next one is half as smooth.
|
|
|
|
OK but who is Terk and how do I PM him? Sorry but I am new here. So you think its possibly a simple typo? That would be great because I'm definitely getting worried.
Click here -> https://bitcointalk.org/index.php?action=pm;sa=send;u=104496Can you look in your config, and then copy and paste the worker name here? thanks. Thanks byt. |
|
|
|
My address is 1MMhkcXAFc3X73iTrnmrkjwYGp1Z3Sgbji thank you for your help.
So you just started mining, it is possible the the BTC wasn't credited until after the daily payout. If you don't get a payout from today PM Terk. Although the address you supplied was a valid BTC address, it may have been mistyped and registered into Clever incorrectly the very first time, ie caps vs. no caps. |
|
|
|
I'm starting to get worried about Clevermining. I have been mining for 2 days now and have 0.02616771 BTC ready for payout. My Bitcoin address is right so I'm not sure exactly what is going on. Does anyone know how to contact them? Please let me know, I will give them a little while longer. If I don't see anything payout I will go to another profit switching multipool, any suggestions?
Same as the POST DIRECTLY ABOVE YOURS. We can't do anything without your address.... Hi!, I apologize in advance for my broken English .... I have a question, I'm on CM for 10 days, my payout is ready for 0.024, why I can not get paid? has gone more than a week, but nothing, what should I do? thank you Please provide your address so Terk or someone can help you out. |
|
|
|
|
Is there a way to Display the pool name on the shared rig page?
Instead of "stratum.nicehash.com:3340" show "NiceHash-Nist5".
|
|
|
|
I'll give a second vote for Corsair.
Currently using a mix of AX860i and CX-750s (just what I was able to get on sale when I needed them) and they're all stellar - and generally good for more than the advertised power rating. Corsair has a habit of rating their PSUs lower than they can actually put out to get higher efficiency ratings.
I can attest to that, my 850 was pulling 975 for days back when I was mining Scrypt. |
|
|
|
|
Show Posts
