Is it possible to mine it on Windows 10 Amd laptop without hurting my computer?I want to get in to mining of Altcoins but know nothing how to go about it

how to mine with the gpu and not the cpu ?

I run 1342MHz (stock OC for card) @1030mv.  Undervolting will allow card to maintain boost clocks, increasing performance (without setting crazy power limit). Use GPU-Z to check actual core clocks....

Less power means less stress on VRMs, GPU, fans, and possibly PSU.  I prefer ~70-73C temps, which I get with ~60% fan, and 80F ambient.  Cards all on risers.  Night they run like 64C @50% fan (~60F ambient).

Ok, I have multi-algo switching problems and am apparently too daft to resolve it. I downloaded the all-in-one miner from here: https://github.com/miningpoolhub/all-in-one-miner/archive/20160728.zip extracted this zip and editted the run.bat. I set a worker on the hub page called Xardas.auto

Here is my run.bat:(which is a direct copy paste from the instruction with the username changed)

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

:start
ethminer --farm-retries 0 -G -S us-east1.ethash-hub.miningpoolhub.com:12020 -O Xardas.auto:x -FS exit
sgminer --no-retry -k vanilla -o stratum+tcp://hub.miningpoolhub.com:12019 -u Xardas.auto -p x
sgminer --no-retry -k groestlcoin -o stratum+tcp://hub.miningpoolhub.com:12004 -u Xardas.auto -p x
sgminer --no-retry -k myriadcoin-groestl -o stratum+tcp://hub.miningpoolhub.com:12005 -u Xardas.auto -p x
sgminer --no-retry -k neoscrypt -o stratum+tcp://hub.miningpoolhub.com:12012 -u Xardas.auto -p x
sgminer --no-retry -k quarkcoin -o stratum+tcp://hub.miningpoolhub.com:12015 -u Xardas.auto -p x
sgminer --no-retry -k qubitcoin -o stratum+tcp://hub.miningpoolhub.com:12014 -u Xardas.auto -p x
sgminer --no-retry -k skeincoin -o stratum+tcp://hub.miningpoolhub.com:12016 -u Xardas.auto -p x
sgminer --no-retry -k darkcoin-mod -o stratum+tcp://hub.miningpoolhub.com:12007 -u Xardas.auto -p x
sgminer --no-retry -k marucoin-mod -o stratum+tcp://hub.miningpoolhub.com:12008 -u Xardas.auto -p x
sgminer --no-retry -k bitblock -o stratum+tcp://hub.miningpoolhub.com:12009 -u Xardas.auto -p x
sgminer --no-retry -k lyra2rev2 -o stratum+tcp://hub.miningpoolhub.com:12018 -u Xardas.auto -p x

timeout 1
goto start

sgminer window opens and seems to retry over and over. Mining never starts. It loops through and detects the cards again, then goes back into a loop of retries that after 10 or so it detects the cards again. WHAT HAVE I MISSED???

Claymore mines at mininghubpool without problems and switches from ETH to ETC while dual mining SIA. Hell even my Zeus ASIC's mine at the pool fine. I have no problem with my Baikal miner either. Only problem is with the all-in-one setup.

I can't give you any error messages are any other info because I don't get any more info myself. Ideas?

price ico is 10k/coin a failure to investors if there are clear

armyman your PSU isn't enough. You shouldn't run a PSU at more than 80% of it's rating. rx480's can pull up to about 225 watts each, which is 1,350 watts. You have up to another 150-200 watts for the system also, excluding the vid cards. So you are over 1500 watts on a 1200 watt PSU. Of course it will not be stable. A 1600 watt PSU will run 6 480's and the system....just. It is still pushing the limit a bit much when you factor in the 80% rule....but it will run stable.