thoroughly vetted...lol...your guys were in beijing for a day and saw the machine working a few hours, that's not thoroughly vetted..
Its been 24 hours that it has been mining at only 7.0 ghs, how can you thoroughly check a machine and its not doing even the minimum advertised hashrate  ?

Its a custom chip, i tried that already.

They replied to 2 of my e-mails 2 days ago, within 24 hours.
I did however sent an e-mail few days back with no response, this time i put the subject with the orders id and got a reply faster, try that..

That's not even the worst part, what if within 1 month it breaks? We haven't seen it run for a entire full month, not even a full week..lol

Using coinmine, so far is the best results i've got.

I have all of the baikal products, mini, mini quad, a900, cube and quad cube.
All of baikal products hash over what they advertise.
My minis are hashing @ 155 mhs, cubes @315 mhs, a900 @920 mhs etc !!!

This new ibelink never goes a full day with an average of 10ghs, right now its been 5 hours that the new ibelink is hashing around 7 ghs.
Plus it never went a full week mining, let alone a full month

When it runs for a full month with a average hashrate above 10ghs then i will think about buying one.

If anyone is interested in seeing it mining, the link is below

http://106.120.52.201:7903/static/

Post some pictures and feedback for us.. 

My orders are updated now.. all paid and unship.
Expected to ship next week.

Unless you have cheap electricty, sometimes is better to just put your rigs at a hosting facility.

Are you guys able to see your order status on the panda miner site?
I'm trying to see mine its giving me a blank page.

How did you setup that up? I have 1 PI hanging out here i would love to know.

Is that the current return? http://www.coinwarz.com/calculators/litecoin-mining-calculator/?h=504000.00&p=800.00&pc=0.10&pf=0.00&d=163668.93594597&r=25.00000000&er=0.01650682&btcer=1554.72000000&hc=0.00

1134.00 monthly ?

What are you guys that got the new L3 mining per day? Is it still worth buying one for july delivery?

https://explorer.dash.org/chain/Dash/q/getreceivedbyaddress/XcE4ZUy5c1FB11G9pCsCmcksUXc4oSxfpf

2494 dash received by that wallet.

Another point to take into consideration is that we have NO proof this miner has worked 1 month or 2 month mining at 10ghs.
Just yesterday it was down to 7ghs for most part of the day until they turn it off and hasn't been online yet and the current data pool only showed it had been working for 3 days.

By the time this machines are done the manufactory will probably mine the shit out of them for a few days and will drive the difficult so high that you won't be making not even near what those calculators are telling you toda. I agree 100% with phill, better to put your money on zec and eth miners than risking buying this.
I'm out..

I'm currently mining at coinmine.pl with around 2ghs for power from baikal.

Please share your current Baikal Setup, pools and settings you have.

P2Pool
Any special tweaks to mine at P2Pool?
Is it better to mine on a node with higher hashrate?

Coinme.pl vs dashpool?

Miningpoolhub
What configurations do you use?

You can count me in for +1

Well, their response was pretty damn quick.
I quote below

I've sent an e-mail to the manufactory and address the following topics below.
If they respond i will post it here.

Hi
I have been thinking about a proposal for you to make the mining community.
There has been a lot of speculation regarding your product, trust issues with your company and all.
I think the main concern of everyone that wants to buy your product are:

1-) Is the machine really able to do 10ghs?
2-) Who is the manufactory?
3-) Can we see credentials for the factory?
4-) Who is the CEO and what are his credentials?
5-) Why only sell in lots of 100 and require immediate payment?

Here are my suggestions to you

1- I've seen video of the machine working, i would suggest you setup a time and date and do a live feed, where people can ask questions and the machine be fully tested, that would solve trust issues with the product.

2-) I would suggest you put up your company information, certifications and all so people can see you have a real and trusted company.

3-) Allow an audit so we everyone can know from a third-party company that you have capability of producing these machines.

4-) I've seen some linkedin accounts linked to your name, if it's you I think people would know you are a trusted person because you have worked in big companies before.

5-) Looks like all buyers that signed or wanted to sign contract with you, most of them don't have funds to back it up by themselves, you are selling at 4999 and people are trying to sell at 6750 7500 so they have enough funds to pay you. This has caused MAJOR conflict with the community.
I would think would be MUCH MUCH easier if you opened for single orders or at least lower the minimum to 2-5 units and charged a higher price, this way people would be able to purchase directly from you and not having to go thru the hassle of buying from resellers.

I'm sure if you can take care of those 5 topics above, things will go much smooth and everyone will be happy.
You can start production on the machine.
People can buy your product at reasonable price and not having to worry about it.

In the end EVERYONE IS HAPPY!!!

Well, their response was pretty damn quick.
I quote below

I've sent an e-mail to the manufactory and address the following topics below.
If they respond i will post it here.

Hi
I have been thinking about a proposal for you to make the mining community.
There has been a lot of speculation regarding your product, trust issues with your company and all.
I think the main concern of everyone that wants to buy your product are:

1-) Is the machine really able to do 10ghs?
2-) Who is the manufactory?
3-) Can we see credentials for the factory?
4-) Who is the CEO and what are his credentials?
5-) Why only sell in lots of 100 and require immediate payment?

Here are my suggestions to you

1- I've seen video of the machine working, i would suggest you setup a time and date and do a live feed, where people can ask questions and the machine be fully tested, that would solve trust issues with the product.

2-) I would suggest you put up your company information, certifications and all so people can see you have a real and trusted company.

3-) Allow an audit so we everyone can know from a third-party company that you have capability of producing these machines.

4-) I've seen some linkedin accounts linked to your name, if it's you I think people would know you are a trusted person because you have worked in big companies before.

5-) Looks like all buyers that signed or wanted to sign contract with you, most of them don't have funds to back it up by themselves, you are selling at 4999 and people are trying to sell at 6750 7500 so they have enough funds to pay you. This has caused MAJOR conflict with the community.
I would think would be MUCH MUCH easier if you opened for single orders or at least lower the minimum to 2-5 units and charged a higher price, this way people would be able to purchase directly from you and not having to go thru the hassle of buying from resellers.

I'm sure if you can take care of those 5 topics above, things will go much smooth and everyone will be happy.
You can start production on the machine.
People can buy your product at reasonable price and not having to worry about it.

In the end EVERYONE IS HAPPY!!!

Well, their response was pretty damn quick.
I quote below