Anyway, that’s my only question
These are preliminary data that the mining pool calculator calculates based on statistics: network difficulty, block rewards, etc. The same as profit in mining calculators, for example on https://whattomine.com/Prоfit changes slightly every 10-30 minutes, but these are only calculated values.
|
|
|
Nvidia GeForce RTX 4000 GPU range could arrive “mid July”
It will suck at mining because of the low memory bandwidth relative to the core TFLOPs. The only algos that the RTX 4000 / RX 7000 series will deliver bang-for-buck are ProgPoW, FiroPoW, KawPow and other power-intensive ones. The new generation has great TFLOP/W efficiency, but poor GB/s/W efficiency. Shintel cards will have the same problem, but if they're priced low enough, it could work. Bottom line: wait for gamers to snap up the new gen, prices of the RX 6000 / RTX 3000 series to be driven down, then buy RX 6800 or RTX 3060/Ti cards when they fall below MSRP. Wait for the next gold rush. In mid-July, we will already have more information about the end of Ethereum mining. If gamers will buy these video cards at expensive prices, then I will not interfere with them. It will take several months to reduce prices for new models and optimize miners.
|
|
|
I am running everything with Admin rights 100%. I basically willing to try anything (maybe except bios flash) since I have run out of ideas here and on this very forum I saw ppl posting the same cards with 30MHs while taking 100W or the cards doing 38-40MHs with more the same Power Usage I currently have. I am sort of stuck in the middle of this with worse of both worlds low MHs and high Power consuption.
Thanks a million.
I think it's not true. The GeForce GTX 1080 cannot mine at 100 watts or the hashrate will be very low. Limit the power limit to 160-170 watts, memory +500 windows, hive os +1000 and use ETHPILL.I don't know of better settings.
|
|
|
Is it possible to define Power Limit from command line when using TRM?
I'm running TRM 0.9.4.7 in Windows 10. Trying to find optimal settings for Gigabyte Vega 56, with Hynix.
Many miners allow power limit setting from command line. Is it possible in TRM?
For Vega 56 use Team Red Miner v0.10.0 README highlights: GPU: R-mode introduced. See separate documentation. Applicable for Vegas/VIIs/Navi10/Big Navi. GPU: Smooth power transitions for ethash family algos. https://github.com/todxx/teamredminer/releases/tag/v0.10.0
|
|
|
Approximate day of difficulty bomb start "Some new charts. Back in December, I was asked to predict 15-second blocks by mid-June. Impossible to be certain, but I wouldn’t be surprised if this were the case. The red line is June 15.The dashed red lines are the last time we were at the same period in each of the previous forks. Much higher hash rates now has tamped down the effect, but that won’t last forever." Source: https://ethresear.ch/t/blocks-per-week-as-an-indicator-of-the-difficulty-bomb/12120/19
|
|
|
i choose TON and FLUX
Ton is over in 30 days Beginner miners always learn from losses. I also did not listen to the advice of experienced miners before, and mine shitcoins. The price of shitcoins may fall by more than 85% and not rise for many years, or the project may be closed.
|
|
|
"lolMiner has only 0.7% fee on Ethash, 1.5% on Autolykos V2 and only 1%+0% fee on dual mining. You will find no lower ones in the market with this feature set. Changes 100% LHR unlock on LHR V1 and V2 GPUs. Unlock working on all supported algorithms including Ethash and dual Mining. Requires Nvidia driver versions 510.x (Linux) or 512.x (Windows) and sudo / administrator privileges! Added experimental LHR v3 unlock to ~90% (3050) and ~92% (3080 12G) (default enables) Use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock (see notes below). If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established. Updated web gui" https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.50
|
|
|
yes as a coincidence it is quite strange to discover the 100% unlock in conjunction with the release of the new lhr cards, but I think nvidia has nothing to do with it, what's the point of releasing some gpu lhr and providing the unlock at the same time?
Nvidia GeForce RTX 4000 GPU range could arrive “mid July” 16/05/2022 Kopite7kimi has clarified that the RTX 4000 series could launch “mid-July”. https://www.pcgamesn.com/nvidia/may-release-geforce-rtx-4000-gpus-sooner-than-expectedThis is probably done in order to sell off old stocks of video cards. If the 4000 series is released, then the top models of the 3000 series should be discontinued.
|
|
|
A pool of aion (aionmine) says to pay within one hour upon reaching the minimum which is 1 aion, for what concerns eth i only know of binance and kucoin that pay daily regardless of the amount of eth mined
Ok, so if i start mining on a Binance wallet and with a Binance pool, will i get rewarded daily without paying higher fees, compared to another wallet using Hiveon pool that rewards for every 0,2eth mined without any fee? There are no fees every day at midnight what you mined on the binance pool is transferred to your mining wallet from where you can move them to your spot wallet (binance) also without fee I changed the mining pool yesterday and the rig is mining. I configured the Binance smart pool into my HiveOs, but i didn't created a mining account in the Binance pool and so i didn't wrote an user name and a password within my HiveOs flight sheet. I have only created a new Binance wallet with my Binance ETH wallet public key and i think this should be enough, right? The problem is that the rig is mining from yesterday and i have not seen any earn into my Binance wallet yet. If you did everything according to the instructions, then you will receive your coins. https://www.binance.com/en/support/faq/9bd21a9536d74d1fb65c83f8e60ded93Binance pool still does not support MEV and I would not mine on this pool due to registration and verification
|
|
|
Will your solution be integrated into Hive OS? I saw that other miners are already updating their versions, in which there is a small decrease in power consumption and a small increase in hashrate. After hacking LНR restrictions, Windows will not be used by miners due to great inconvenience.
|
|
|
In solo mode, you can probably now only mine a new coin that does not yet have pools, but many miners will not like reading long instructions and downloading a lot of data on each PC. It makes no sense to mine coins from the WhatToMine site in solo with a small hashrate.
|
|
|
teamredminer v0.9.4.7 "We've chosen to release v0.9.4.7 and the previous v0.9.4.6 as public betas to gather more user feedback without triggering automatic updates in mining distros. With the v0.9.4.7 release, we believe we've solved the issue with some Navi gpus simply not responding well to R-mode, rather dropping to e.g. 48-50 MH/s instead of expected 55-56 MH/s for a 5700/5700XT. We're expecting to push this version in a proper public release shortly unless we hear about any additional issues. If you don't use the new R-mode, or you're a Windows miner, you still have an upside running this new version for the "smooth power" rewrite described below." https://github.com/todxx/teamredminer#teamredminer-v0947
|
|
|
also a molex cable can do 2 risers.
Technically correct but not advised unless YKWYD. But it should never come to that. If you need that many extra PCIe power connectors you're probably overloading the PSU. If the power supply is overloaded, it will turn off. The whole problem is only in cables and connectors, which can start to melt from overheating.
|
|
|
Please tell me where this software came from? Over the past week, almost all miners have released releases that remove the hash blocker. Did Nvidia distribute this solution to all miner developers or did you buy it on the market? lolminer dev was in a video that said it was more than likely created from the hack on nvidia. All the unlocker does is constantly refresh the count down timer the nvidia driver uses to enable LHR when it sees that GPU is mining. A very simple and ingenious solution. Why wasn't it implemented before?
|
|
|
So they did it mostly to please the gamers. No idea if it worked or not. Miners still bought their cards. However now that GPUs are becoming more accessible and less miners are buying them due to ETH low profitability, they might as well unlock them.
As you said, miners still bought their cards, and unlockers are forcing Nvidia to spend more money to try to improve LHR. Add to that the stupidity of deliberately alienating valuable customers and it looks like a massive failure. The only winner seems to be AMD because their GPUs became more competitive for mining, and maybe those lucky few that got non-LHR cards at MSRP. Now there is no shortage of video cards, so LHR restrictions are meaningless. Probably it was Nvidia that helped the miner developers solve the problem, because they used to say that it was impossible to do it. And gamers are in no hurry to buy the RTX 3000 series.
|
|
|
Thank you all very much for your answers, I don't know if chia mining is profitable today, I would have to inform myself. Is there another way to generate profits?
Mining will bring very little profit, for plotting you need to mine CHIA coins. If you are not interested in this and you do not need servers, then consider selling or leasing them.For example, these servers can be used to install an accounting program for a small company so that the server is not located in the office.
|
|
|
I have melted sata cables when i did 2 risers more than one time.
My experience with the SATA/Molex PCIe risers is they are actually safer for higher-power video cards like RTX 3080's or RX 6800's. The danger is the low-end GPUs with only a 6-pin power connector. Back in 2017 I attempted to build a Radeon RX 470 rig with Molex PCIe risers. When it started mining ETH, the cables started billowing smoke. I figured out the cards were drawing the full 75W through the PCIe slot. 6A of power was going through a single sucky 20AWG wire. From then on, I only bought risers with a 6-pin power connector. I buy cables with a 18AWG thickness at minimum, with 16AWG preferred. My Radeon RX 470 - 480 have been running SATA raisers for 6 years now. I do not use adapters with :4 pin - SATA raisers, because they are of poor quality and I connect the raiser directly with a SATA cable from the power supply. The 6 pins of the raiser at that time were not very polar due to problems with the connectors on the PSU.
|
|
|
This delay will be in accordance with mainnet merge date(i.e. whichever date devs are confident with). Judging by how the development is going, it will be a delay of 2 months from June 15th. So 15th of August is my prediction for merge.
If the developers indicated quarter 3-4, then the end of mining may occur much later. Miners cannot influence this event, but the main thing now is not to buy expensive video cards, because there will be difficulties with their payback.
|
|
|
|