Any switched managed PDU can do this. I use Triplite, APC or ServerTech but there are many makers out there. I also heard good things about this but never used it. http://www.digital-loggers.com/lpc.htmlEDIT: Spelling Corrections Thank You. I will try one of these.
|
|
|
Was that back to back restarts? I've been thrown off again ..... after being back for only a minute and a bit ...
Yup all my miners are back at the 2nd pools. *EDIT* aaand back to kano.
|
|
|
Yeah, any discounts on multiple units?
|
|
|
I have been running a c1 for about 2.5 months now. I can't seem to get the "Rej%" rate any lower than 3.5%. Its running with a Corsair T850M Power Supply and is set to normal speeds.
My nearest competitor that sort of reject rate on an s3 is .4%
Thoughts in advance?
thanks.
Where do you see that? All I see is the # 'Rejected' and on mine at least it's extremely low.
|
|
|
Ohh, came to check about the webpage and we hit a block also About time. These 40hr stints kill the earnings lately. Ps. Still can't access the website. Last 25 Blocks 91.26% 91.06% 0.3469 109.81% 91% over the last 25 blocks, yeah, my earnings. Crap I think my averages and month is off again. For some reason I keep thinking of no blocks on earnings in 48, then 40hours, which ends up being 1/2 normal earnings. I guess at the big picture, monthly average it works out in favor . Ugh. Gotta get my head around this mining stuff.
|
|
|
Stupid question probably, but can an SP20 be run off 2 or 3 power connections? One per Hashing Board?
Trying to see if I can run 2 downclocked SP20's off one EVGA 1300W G2, but it only has 6x 6pin power cables.
|
|
|
No the S3s are a bit louder than the c1. Not by much though. I will probably look into swapping fans later if they bother me. Not sure yet. Much quieter than my sp20s tough. Lolol
|
|
|
Ohh, came to check about the webpage and we hit a block also About time. These 40hr stints kill the earnings lately. Ps. Still can't access the website.
|
|
|
Impressive. You are at 675v. What is your frequency?
When you run at 760v. How many watts you are pulling from the wall.
Most efficient test I have and am running them at currently, is 0675v, 800GH/s (200Freq on all 4), no 'x', 804-817GH/s averages, pulling 575-590watts (I have 3 of them running). I tell you though they are not much quieter than the S3 I have running at 200Mhz/400GH/s. C1's temps are all 33-35c. I never ran 076v. Max I ran was 075 @ 250Mhz, 1008GH/s stock. I briefly test 275Mhz @ 1123GH/s but it was pulling 943Watts. I love the idea of under clocking these. Please keep us informed. Have you tried on multiple to see variance between miners? Like I mentioned, I am running 3 of them. Underclocked, the C1's are ok, but otherwise, unless you have free or very cheap power, not worth it vs an S5 or better yet an SP20. I'll be testing some S5's finally in a week or so as I got my hands on a few. We'll see how they compare to the C1. I think the C1 is strictly S3+ boards mated to a watercooled block between them. I'm actually going to look for an enclosed watercooling system that will eliminate the spaghetti of wiring and hoses this system requires. There has to be a way to make it nice and neat.
|
|
|
Impressive. You are at 675v. What is your frequency?
When you run at 760v. How many watts you are pulling from the wall.
Most efficient test I have and am running them at currently, is 0675v, 800GH/s (200Freq on all 4), no 'x', 804-817GH/s averages, pulling 575-590watts (I have 3 of them running). I tell you though they are not much quieter than the S3 I have running at 200Mhz/400GH/s. C1's temps are all 33-35c. I never ran 076v. Max I ran was 075 @ 250Mhz, 1008GH/s stock. I briefly test 275Mhz @ 1123GH/s but it was pulling 943Watts.
|
|
|
Does anyone use remotely accessible and tripable power plugs/strips that they can access via an app or web to reset if need be?
I found a bunch of them, but they all seem like cheap, low power 10A chinese junk. *No offense but it's true*.
|
|
|
Hi all. Do you guys run these at full blast or down clock for better efficiency?
I played around with the voltages and frequencies, and best seems to be 810GH/s at 585Watts at the Wall (0675v). Once you go up from here the wattage goes up exponentially.
I mean I dig the quietness, but it is not much quieter than my S3's at 400GH/s down clocked and the plumbing 'issues' with the radiator, wiring, etc..etc.. just IMO make it much more of a PITA than the simple S1/S3/S5 design.
Still playing with mine, but at stock voltages it's not a good design IMO.
Unless you under clock it, it uses the maybe 50watts less juice, than a pair of overclocked S3's at the same speeds. The only benefit I see is the size savings, which gets negated by the plumbing issues again. LOL
|
|
|
Problem is the 220v is in the 2nd floor washer&dryer alcove between kids' and guest bedrooms. Lol. Too loud probably. Lol
|
|
|
Spondoolies,
To everyone at Spondoolies, you are in our thoughts for your election tomorrow March 17th, 2015.
/s TuffToad
Agreed! I'm pissed at my president and all he is doing to try to get rid of Benjamin Netanyahu. Our world will be a much better place with my president in the US out of office. Don't get me started on this 'president'. Only thing he presides over is creating more racial tensions and a 'gimme-that' society.
|
|
|
Still have some units available.
PM if interested.
What's with the -4 / -1 Trust? Why should anyone deal with you?
|
|
|
Yeah I've been reading a lot about their problems and company fraud like behaviour.
If I find one cheap enough I'l get one to play with I guess. Sux that even the basic hashing is unstable on the darn thing. LOL
|
|
|
Thanks, but if the main display doesn't show all the required info, then it kind of defeats the purpose of it.
|
|
|
Sp20 has 8 chips in it, and no PSU. Sp3x has 30 chips in it, and power supplies.
ergo; the SP3X is worth 3.75x SP20 at minimum
Per your Opinion. Like I said. It's nothing urgent, more like a pet project and I've priced it per SP30 prices recently on this forum and online, as well as SP20 prices recently. I have time and can wait .
|
|
|
Doing some experimenting, so I'm looking to trade for an SP3x miner.
I was thinking of throwing in 3x SP20E's in perfect condition, maybe some extra ca$h if the deal is right.
Plz let me know.
|
|
|
Wow nice. So on my Dell Z750P and the EVGA 850 G2's, I have plenty of 'wiggleroom' if I need to. I don't use it per say, but good to know, I can trust them at those levels.
*although the server PSU's are used, so who knows how much mileage they have to begin with.*
Thank You both.. Again.
|
|
|
|