woo hit my first solo block  Oh I wanna have the link of the whitepaper
 for FLAPX ? Flappy's getting swapped soon although from what I've read Flappy will still exist but it will no longer be maintained |
|
|
|
...
Being a noob I thought "sudo apt-get update" was updating the OS. It was not until I had this problem that I learned it is supposed to update the libraries. So next time I will try and update the OS first then the libraries.
Off hand do you know what I need to do to get BFGminer start automatically when the Pi is powered up?
https://www.dexterindustries.com/howto/run-a-program-on-your-raspberry-pi-at-startup/you want the rc.local part I believe |
|
|
|
Hey guy's, Exvio have started their exchange and asked for coin suggestions yesterday in discord. I've put elite forward but more people will need to do the same or thumbs up my suggeestion for it to get listed... get on it  can you share the discord link? sure: https://discord.gg/mSvS57v |
|
|
|
Hey guy's, Exvio have started their exchange and asked for coin suggestions yesterday in discord. I've put elite forward but more people will need to do the same or thumbs up my suggeestion for it to get listed... get on it |
|
|
|
Ok what did I do wrong for the multipool setup? Pointed it at the dgb scrypt stratum. Added in my username and password then nothing. wouldn't run. Added the .1 to my username and it started running. bfgminer.exe --scrypt -o stratum+tcp://eu.multipool.us:3351 -u Moonlander2.1 -p x,d=256 -S MLD:all --set MLD:clock=796
pause any help would be swell. Really. Back on litecoinpool till i can get this dgb working. did you register? OK I am lost, I had to reinstall the os on my Pi and started loading BFGminer. It can not find the needed libraries libjansson-dev or libcurl4-openssl-dev as instructed by the first few pages or this thread. I did this all a few short weeks ago and dont remember how I got around this. What am I missing?
apt-get install I have been trying that, sudo apt-get install -y libcurl4-gnutls-dev libjansson-dev. All I ever get is, E: Unable to locate package libcurl4-gnutls-dev E: Unable to locate package libjansson-dev Like they gone. But I dont know where they should be coming from in the first place. I reloaded and updated Raspbian again and still no luck. Anybody know how I can find these library files? Update OK I am back up and running. For some reason when I did a fresh Raspbian install and tried to update it, it did not update my package list this time. I ran sudo apt-get update again and it worked! It can now find the necessary library files. I had this with my new 3b+ the other day, if you have any other issues its also worth doing rpi-upgrade, gpsp compiled but wouldn't run untill i did that and recompiled!! |
|
|
|
Ok what did I do wrong for the multipool setup? Pointed it at the dgb scrypt stratum. Added in my username and password then nothing. wouldn't run. Added the .1 to my username and it started running. bfgminer.exe --scrypt -o stratum+tcp://eu.multipool.us:3351 -u Moonlander2.1 -p x,d=256 -S MLD:all --set MLD:clock=796
pause any help would be swell. Really. Back on litecoinpool till i can get this dgb working. did you register? OK I am lost, I had to reinstall the os on my Pi and started loading BFGminer. It can not find the needed libraries libjansson-dev or libcurl4-openssl-dev as instructed by the first few pages or this thread. I did this all a few short weeks ago and dont remember how I got around this. What am I missing?
apt-get install |
|
|
|
Has anyone set these up for digibyte dgb? Can you help me set up a scrypt for the miner? I'm really terrible at it. Figure I can let it make like 16 coins a week and hope it goes big in the future. Would love to solo mine but if a pool is the way to go that's cool too. Just looking for the best rewards.
DGB has allready gone big mate, i was mining em years ago for pittance unfortunatley left my bag at 95 sats on an exchange  you live you learn. you would need a pool but would likely be better off mining something else and trading that in for DGB or use a multipool that will payout DGB. all you'd need to do is edit the launch scrypt that comes with the program replace the pool and user details and you're good to go |
|
|
|
|
PreMine: 450000 (this will support 150 MN and also for rewards)
Staking Time: 8 hrs
Blocks 2-50 - 0 Coins
Blocks 50-1500 POW - 20 Coins
Blocks 1501-2500 POW - 5 Coins
POW ends after Block 2500 and we transition to POS / MN
SuperBlocks are randomized
MN Collateral 2500 TRO
MN Rewards Approx 26 Coins / Staking gets 2.6 + SuperBlock rewards where applicable
Don't bother wasting your hash or btc on this
|
|
|
|
...
oke i have bring it back to 25,,, i have 100/100 conection.today i could long time the stake low let see ...lol. look now it,s going up... whith my coins in my wallet i earn nothing ...trying the stake rate down.thats my goal. ps i have send you a pm i have again set my conection on unlimited..look at the stake rate its going down again ..and Cryptopia also must go back online sorry I'm having a hard time understanding you, but I think you're a bit confused. stake weight isnt affected by how many people you're connected to but rather how many people are staking. the amount of peers you personally are connected to will not affect your weight but being connected to a lot of peers will affect your internet connection slowing it down. |
|
|
|
I really should have set up an account at reddit by now... A lot of users move to suprnova pool.
I think the reason is high "Minimum Payment Threshold" - 50 wow.
May be 10 wow enough ?
I agree with you, speed and diff has greatly increased. It is necessary to reduce the minimum payment. It was 10 and I increased it to 50 because I am/was only able to send payment to one miner at a time. If I left it at 10 I would be paying far more in transfer fees than I was taking in as pool fees. You can move to a different pool, or hopefully when there are more tx outputs available it will become possible to send to many miners at once and I can reduce it again. could you at least do payouts below 50 once a week? I'm at http://mine.wownero.com/ they need to do the same, 3kh in 10 hours has only earned 16 coins, im going to have to leave my miner pointed there for at least another day to get a payout and with more and more people going to nova that numbers only likely to increase |
|
|
|
I want to mine two different coins (different workers on the same pool) at the same time.
I am running 8 MLDs on one Pi.
I have 4 MLDs running each on 2 hubs(which I intend to extend if I get this working).
For this reason I power down one hub and start BFG miner with the first coin I want to mine. It finds the 4 MLDs and starts hashing.
Then I power up the second hub of MLDs and run a second instance of BFG miner with the other coin. It finds the other 4 MLDs and starts mining.
However after a short time the speed of first instance drops down slowly (a couple of minutes) to 1Mh/s per MLD and lower. I shut down this instance and restart it and it is back to 3-4Mh/s per MLD but then the other instance starts to slow down and goes below 1Mh/s.
I can alway repeat this back and forth, the instance that was running before will always end up runnning slow.
I don't see any hardware errors (600 clock) or any other unusual activity.
Anybody have a fix for this or another way to mine two (or more) different coins on one system?
this has been coverred several times, stop switching the hubs on and off and create 2 different launch scripts. Can someone give me steps how to set 2 MLD sticks mining verge and the rest mining Litecoin?
create 2 separate configs or launch scripts and specify which devices to use with: -S MLD:/dev/ttyUSB0 -S MLD:/dev/ttyUSB1 ... and so on make sure to remove the -S all if you're on linux here's a scipt to find out the correct device numbers to use #!/bin/bash
for sysdevpath in $(find /sys/bus/usb/devices/usb*/ -name dev); do
(
syspath="${sysdevpath%/dev}"
devname="$(udevadm info -q name -p $syspath)"
[[ "$devname" == "bus/"* ]] && continue
eval "$(udevadm info -q property --export -p $syspath)"
[[ -z "$ID_SERIAL" ]] && continue
echo "/dev/$devname - $ID_SERIAL"
)
done
edit: Im running 10 now on a raspi2 through a hub been goig about 12 hours still at 4.3mh per mld |
|
|
|
i have my wallet compleet sync look at my connections.
but many time,s i see my wallet freez, anybody els have this prob?
for many connection open tcp poort 13373 in your router...
version" : "v2.0.0.0-g",
"protocolversion" : 60020,
"walletversion" : 60000,
"balance" : 8990.70008638,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 1374112,
"timeoffset" : -3,
"connections" : 74,
"proxy" : "",
"ip" : "14,.,,.,,...",
"difficulty" : {
"proof-of-work" : 0.36940065,
"proof-of-stake" : 10.10529359
},
"testnet" : false,
"keypoololdest" : 1521455434,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}
!! 74 connections blimey mate close your wallet,open your conf file and add the following line restart your wallet and it shouldn't connect to more than 25 nodes, you can change 25 to whatever you want but I wouldn't set it lower than 5/10 |
|
|
|
|
been minig this for a little while now and I only check the thread once in a while but so far I'm pretty impressed also quite surprised this coin doesn't have higher exposure
|
|
|
|
Mobile Miner Source Code For Sale!! (Full Source Code and Instrusion For Compile Apk) Start 7 April 2018 - End 15 April 2018. The auction price start at 0.1 BTC. bid your price here. The fund collected will be used for developer mobile wallet. Thanks You. Join our discord and start bid https://discord.gg/rCAaBCWmassive facepalm! I really don't understand why you'd go mobile only closed source and then sell the code to any tom dick or harry with 0.1btc who can then use it to create another cpu miner. |
|
|
|
|
First I've heard of this project.
I'd be very concerned if I'd have invested pretty much everything you've described is a giant red flag
|
|
|
|
Since the lower APR now I have noticed a drop in the network weight. I'm now actually thinking of having my Elite coins in 1 million blocks instead of the 2 million blocks I currently have them in. It seems that people might not stake now due to this lower APR but it gives others a chance to stake and even newbies getting in. So I'm going to give this a try and see how it goes.
it's consdierabley lower, before the fork i was staking on average every 8-12 hours post fork its 4-5 hours. I'd assume that you're right and a lot of people have stopped regularly staking, perhaps they're just leaving their coins to gain weight so they get a higher reward and not just thinking of dumping |
|
|
|
.... Hopefully you didn't lose too much and good luck with your threadripper  about 100, if memory serves I heaven't logged back in to my tracking app yet I'm dreading it lol. Thanks man gonna point my old i7 at it when I can be bothered to pull out some cables and linux it up |
|
|
|
Damnit to hell, windows died managed to get in safe mode and succesfully reset windows while keeping user files but its deleted the contents of %appdata% guess my aro is irretrevable now. Do you have a record of your private and public keys? I dont think so I used the original release first I've got that folder backed up (I assumed it was like cryptonotes and put your wallet there) but didnt get on with it so started using the "light" gui wallet instead and i forgot to back that up  All I can say is f***k microsoft and their "keep user files" on the plus side my threadripper arrived today |
|
|
|
I'm trying to mining on 5.5.5 MAC Wallet but I'm not receiving noting. What is the correct command? I'm using setgenerate true 2 but is not working.
the likeliness of hitting a block cpu mining is low, like really really low. I recently got a few low power asics 4.2mh each and i pointed 5 of them at my flappy wallet I got nothing in an hour and a half and that 20mh is a hell of a lot faster than a cpu |
|
|
|
Damnit to hell, windows died managed to get in safe mode and succesfully reset windows while keeping user files but its deleted the contents of %appdata% guess my aro is irretrevable now. |
|
|
|
|
Show Posts
