I realized obviously.
I mined the XDNA coin and also invested money into XDNA.
Really recognized the one is a good one, deserved to invest.
I think so too. But alas, the current market does not allow projects to realize their potential and puts them in a negative light before investors. times like that are what a lot of investors look for, find good project wait for dump fill bags |
|
|
|
Sorry for the late replies guys, I was a bit sick today and I just checked the forums. hey guys one of my masternodes keeps stopping the others fine both running the same os and binary so I'm a little confused. Have any of you had this sort of issue and would resyncing the dodgy one be worth a try?
This is strange, are you sure you've updated this masternode to the latest version? It's 1.3. If it's updated, on your vps type xdnad -listen=0 If this doesn't help either, please come to our Discord and ask for assistance there: https://discord.gg/dzqmQRAthanks, its been stable for about 32 hours atm so if it stops again I'll give this a go  |
|
|
|
|
hey guys one of my masternodes keeps stopping the others fine both running the same os and binary so I'm a little confused. Have any of you had this sort of issue and would resyncing the dodgy one be worth a try?
|
|
|
|
repeat of issue with adding / changing order of pools today on miner restart both pools were somehow set as main and active, units giving lots of hardware errors decided to reboot but neither of my units will shutdown or reboot from the menu, you get the shutdown image but nothing happens it just keeps hashing so I had to do a hard power off/on.  might try a clean install in case anythings gone weird on the os, concerned that both units were acting the same. I'm using MiningDutch as my failover so I'm not sure if just there's an issue with that pool and these units or the software. I do see a few complaints about it on my MLD's issuing work for old blocks, not matching coinbase etc. I've added #skipcbcheck to the url which removes the coinbase error on the MLD's and repeated this on the apollo's as well as setting the difficulty via the password field. I got my FutureBit Apollo miner today, easy install/setup and now it is happily mining. I connected to it by opening http://futurebit.local on my browser. If I add a second or third Apollo box in the same network what is the expected DNS name to us? perhaps someone who has multiple miners running already know. Thanks !! if you have more than one you can connect via its local ip address |
|
|
|
3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.
that'd keep the wallet running sure, would you not still need to open your desktop wallet to actually start the masternode though? will give 3.3.4 a go in a bit. tbf the rewards when working are much better than they were hoping for a more stable version soon. |
|
|
|
daemon crashing on vps, been leaving the qt open rather than having issues after shutdown still no pos rewards. No fortuna rewards in over 24 hours listed as expired logged into vps and the service is not running 2nd time now  |
|
|
|
...
Thanks for this....were trying to find bugs on our end but need feedback from you guys for stuff we missed (I guess the lack of issues is a good thing other than a few minor shipping damage).
-The fan should shutoff on shutdown, might have to check our logic on the fan pin...Does it do this every time because were not seeing this on our end
-If you shutdown the unit wont restart until you unplug/replug power. Use the "reboot" command for this in the system options.
-Pool changes should show you a "Miner needs to restart" button on the top...you should not need a full reboot though...ill do some more digging on this one.
the fan running at full speed on shutdown only happened the once after my initial setup I needed to shutdown to plug the second unit into the psu, then after testing I shutdown again to move the units and there were no issues. it was after moving from a cold boot one of the units failed to start and connect to the network, the reboot command works quite well but in this instance my only choice was to cut the power the pool order change issue was really odd after setting up a pool for testing I decided to use that as the failover but one of the units wouldn't allow an order change until reboot the other was fine and just restarted the miner. its all minor weird glitches that don't have much impact and are intermittent and possibly singular, the only real concern for me was when the fan went nuts but as it hasn't happened again I figure there was just an error on shutdown |
|
|
|
Order # 1209 was received at Portugal and two more Apollos are working. The screws on the sides came without tightening but it was easy to tighten. Only problem was having to pay an additional $ 95 for each at Customs ! 95 each?? Isn’t import VAT ~17%? Should not be more than $50. VAT is different from country to country here in the EU. Here is 23% and I paid even more $ 45 in administrative expenses! I will buy more when available from the your European retailer. got a text earlier from fedex £54.95 to pay here in the uk and i was hoping I'd gotten away with it too lol Feedbackhad my units for almost 24 hours now running pretty smoothly but I've had some minor software issues: shutdown of one of the units caused the fan to run at full speed continuously after a shutdown a unit failed to start after shutdown power cycle solved this unable to change pool order until restart on one system, seems fine now case: the gap between the 12v connectors and the case is too small making it difficult to plug or unplug my psu due to the latch just like the MLD's these are a great product that I could happily recommend simple to use even for a first time miner/Luddite GJ |
|
|
|
Mine are due to arrive Monday I can take a reading from my usage monitor then if its helpful?
Please do! I will do the same, but I don't want to reset my GPU rig just to do that, or play around with other PSU just to see usage. I will have plenty of time for that. So if you have chance please do. so they arrived an hour ago just set the first up on an 1300w psu gold rated that I had spare (the fans really noisy so I haven't been using it) the electricity monitor I have's reading 137-139w at the wall with everything on default settings which is giving ~98mh/s temps at around 66-67C I'll get the second one running and be back with the results 261w at the wall running 2 |
|
|
|
I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.
Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.
I'm also having a lot of issues downloaded latest wallet and tried syncing but it stalled for sa few hours resynced using the blockchain data from githubsetup vps in the same way using the blockchain and changed conf files for fortuna unlock wallet for pos started fortuna and it ran for an hour before stopping restarted desktop wallet and it crashes at verifying database resynced chain using blockchain from github wallet started, unlocked for pos started fortuna and it ran for about 12 hours before stopping just restarted desktop wallet and it crashes at verifying database edit: gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue Same. After so many smooth upgrades, this is a bit of a disappointment. Just can't seem to finish synching up. The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord. that's what I was doing mate, third time was the charm though scratch that just tried to setup my masternode so restarted the wallet and its back to crashing at verifying integrity |
|
|
|
I cannot sync with the network either. Out-of-date blocks is nearly 17000 at this point. I can connect to 15 other users yet watch the out-of-date blocks tick up every minute. Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file. UPnP is checked and it shows as active on my router's UPnP list. Are there additional ports I need to open? I had to manually do so when BitBean updated a few months back.
Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup. Don't want to wait a day re-downloading the chain if I can avoid it. Any suggestions would be welcomed. Thanks.
I'm also having a lot of issues downloaded latest wallet and tried syncing but it stalled for sa few hours resynced using the blockchain data from github setup vps in the same way using the blockchain and changed conf files for fortuna unlock wallet for pos started fortuna and it ran for an hour before stopping restarted desktop wallet and it crashes at verifying database resynced chain using blockchain from github wallet started, unlocked for pos started fortuna and it ran for about 12 hours before stopping just restarted desktop wallet and it crashes at verifying database edit: gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue |
|
|
|
My first unit arrived. Mining away now, with 102.65 MH/s, Eco mode, fan on auto. Temperatures 65.5 for miner and 68.0 C for MCU. PICTURES: https://imgur.com/a/tvMZvj0Amazing job, jstefanop! what is your wattage at wall and if u have that info what PSU model is powering it thank you I plugged it to my GPU rig, powered by Thermaltake Toughpower 1500W. But for day to day use, any ATX power supply will do really, as long as it have 2x 8pin PCIE connectors. I have many secondary PSU lying around which I will use to power Apollos once I decided where exactly they will live this winter. Usage jumped up for at least 100W (according to Thermaltake app, which reads it directly from PSU, I even have USB cable which goes from PSU to motherboard USB pinout, to read all stats from it), but I didn't measure it at the wall. Mine are due to arrive Monday I can take a reading from my usage monitor then if its helpful? |
|
|
|
The new TittieCoin - TIT website is now live! We are very happy with the user feedback and excited to release the next set of updates to the user area. https://tittiecoin.comquite a nice website I do however find the lack of breasts surprising (and a little disapointing  ) |
|
|
|
Looks like we did a minor screw-up and should have collected phone numbers for everyone at checkout since we are shipping out mostly fedex. If your order number is between 1190-1240 please reply to your order confirmation email with your phone number so we can update and send these out ASAP.
Ill shoot everyone an email reminder as well.
crap only just saw this order numbers in the range, I'll respond to the order update email as I didn't recieve an email reminder glad I checked the thread |
|
|
|
Trying to upgrade my masternodes to 2.1 atm but when checking sync I run into this issue :~$ ./syndicate-cli getinfo
error: {"code":-32601,"message":"Method not found"}
any ideas? just want to make sure its synced |
|
|
|
BitmxittzEx - Bitmxittz Loyality Reward
Gift coins from BitmxittzEx to 10 loyal Bitmxittz forum followers.
BitcoinTalk Users:
---------------
Kisleav
dncdog
sesiah
ever_3x
abba1
derzsia
TanchikG
uralcryptocoin
Bayoe_noe
AltScope
awesome, thanks |
|
|
|
Hey dev, when does work start? There's been no news for a long time. What should investors expect?
devs been offline for awhile. I gave up on this a long time ago as it was just hold, swap repeat |
|
|
|
I need one SD card per device for it to run, right?
Yes, each device has its own controller board. Thanks for the clarification. However, on every page and occasion, you are mentioning SD Card. I would assume this is full-size SD Card required. And now we know that micro SD is required. I have full-size SD card in my cupboard and I thought it will be just fine, so I purchased another microSD card for second unit (I have SD adapter). I was lucky with that purchase, now I know that  My card will work. But I need another one now :| I thought I will be OK with SD card and microSD->adapter card. Can you please correct that for other people. yea I never thought it would be a full sized SD card. Aside from the fact jstefanop clearly wrote Micro SD in the specs pretty much nothing uses full size SD cards these days well some cameras do but thats about it. I think this is more a case of you misreading than being mislead |
|
|
|
|
Nice, the new design is a massive improvement on the previous
|
|
|
|
|
Show Posts
