Great review, thanks Dogie.
+1 Great job mate! +1 Thanks Dogie!
|
|
|
If you assume a slightly smaller difficulty rise (38%), (and perhaps oc it to 200 GH/s) you'll just reach ROI http://thegenesisblock.com/mining/a/d2034e2912ATM the problem is falling BTC value (or you can regard it as an opportunity to buy for less fiat notes)
|
|
|
Got my S1 today. Some local shipping delay due to Aussie Post being as 'efficient' as they are.... but it finally arrived (ordered Monday 11/03, arrived Tuesday 18/03). It was well packaged and survived the trip intact. Thanks Bitmain! Had a bit of 'drama' when I entered my pool info, and then it stopped hashing.... after a few minutes of panic, I realized that there were some characters left from the previous entries in the 'copy & paste' of user credentials. Fixed that and it's all good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Does anyone know how to switch pools in a quick way or get into other cgminer internal settings Cheers Reload the daemon without rebooting the antminer S1: /etc/init.d/cgminer reload Thanks. I tried this, but after a pause it comes back to the original pool settings. Do you mean - change the pool settings in web gui, then ssh and reload the daemon? Cheers yep Took me a while to try this, but it did not work for me (Got beeping sounds and loss of internet connection, eventually reset system). I found that if the miner configuration is changed in the web gui, then clicking 'save & apply', this changes the pool setting without the need to SSH (it probably does the same). Cheers
|
|
|
I'm cursed. Every time I add more hardware this happens. ![Roll Eyes](https://bitcointalk.org/Smileys/default/rolleyes.gif) ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I share the blame, just added an Antminer S1....
|
|
|
Has Slush's ever run longer than this block?
yes Slush block # 21746 which was found on 28/02/2014 11:00 took 21:59:22... so no record broken yet...
|
|
|
Got my S1 today. Some local shipping delay due to Aussie Post being as 'efficient' as they are.... but it finally arrived (ordered Monday 11/03, arrived Tuesday 18/03). It was well packaged and survived the trip intact. Thanks Bitmain! Had a bit of 'drama' when I entered my pool info, and then it stopped hashing.... after a few minutes of panic, I realized that there were some characters left from the previous entries in the 'copy & paste' of user credentials. Fixed that and it's all good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Does anyone know how to switch pools in a quick way or get into other cgminer internal settings Cheers Reload the daemon without rebooting the antminer S1: /etc/init.d/cgminer reload Thanks. I tried this, but after a pause it comes back to the original pool settings. Do you mean - change the pool settings in web gui, then ssh and reload the daemon? Cheers
|
|
|
Got my S1 today. Some local shipping delay due to Aussie Post being as 'efficient' as they are.... but it finally arrived (ordered Monday 11/03, arrived Tuesday 18/03). It was well packaged and survived the trip intact. Thanks Bitmain! Had a bit of 'drama' when I entered my pool info, and then it stopped hashing.... after a few minutes of panic, I realized that there were some characters left from the previous entries in the 'copy & paste' of user credentials. Fixed that and it's all good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Does anyone know how to switch pools in a quick way or get into other cgminer internal settings Cheers
|
|
|
Following the launch of Antminer S2, may need to reconsider the pricing.
|
|
|
How long does it take for them to actually ship from china ?? I ordered mine yesterday when will they have shipped it ?? Thanks, JT
I ordered 2 on Monday and 1 yesterday morning. They are both shipped and enroute via UPS. Delivery to NY by Friday. Did you get tracking info ?? And did you also receive the confirmation email?? No email after paying. Only got the email today and just for one. But on the bitmain website, they are both shipped and have a ups tracking no Thanks, So i hope i will get tracking no today or tomorrow ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Yeah I think they are probably really busy with all the increased orders the last week due to price drop Ordered and paid on Tuesday (11/03). Did not get any email after payment. 2 days later, the order status on the Bitmain website is "Paid Unshipped Valid". Looks like they are not coping with the increased demand, which is regrettable as difficulty just increased again ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Messaged BITMAIN per the website, and received a quick reply that it was shipped today (13/03). No tracking number yet, and the order status on the website is still unchanged. The quick response is appreciated. Edit: Now have the tracking number on the website (it is shown on the full order, not the small summary table - click 'view' on the summary and this shows the full order with any added shipping/tracking). All looks good ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Slush block #21811 seems to be stuck in the 'Processing....' stage on the stats page. Too much number crunching after more than 12 hours? (the 2 following 'quickie blocks' are already done).
Cheers
On the Slush's Pool App on my phone it shows that it is a processed block. No worries there, it will show here in some time. Is the reward outcome shown on the Pool App? Edit: I looked at the JSON format (link at the bottom of the Stats page), and the reward is shown there, but looks like there is some script problem in the 'normal' html representation. So it's a 'reporting problem' only....
|
|
|
Slush block #21811 seems to be stuck in the 'Processing....' stage on the stats page. Too much number crunching after more than 12 hours? (the 2 following 'quickie blocks' are already done).
Cheers
|
|
|
Hello, I have around 30 AntMiner u1s. During testing I found some don't give hardware errors at 1.8ghz and others at 2.0. Is it possible to run them at different frequencies on the same computer/miner software and if so how would I go about doing this? Thank you for your help
You should be able to have different settings per device, for example BFGMiner (see the readme.txt file) has the option --set-device <arg> Set default parameters on devices; eg, NFY:osc6_bits=50 You'll need to do some research and find the correct syntax for setting individual devices on Antminer U1. Suggest that you read https://bitcointalk.org/index.php?topic=390929.0Cheers
|
|
|
How long does it take for them to actually ship from china ?? I ordered mine yesterday when will they have shipped it ?? Thanks, JT
I ordered 2 on Monday and 1 yesterday morning. They are both shipped and enroute via UPS. Delivery to NY by Friday. Did you get tracking info ?? And did you also receive the confirmation email?? No email after paying. Only got the email today and just for one. But on the bitmain website, they are both shipped and have a ups tracking no Thanks, So i hope i will get tracking no today or tomorrow ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Yeah I think they are probably really busy with all the increased orders the last week due to price drop Ordered and paid on Tuesday (11/03). Did not get any email after payment. 2 days later, the order status on the Bitmain website is "Paid Unshipped Valid". Looks like they are not coping with the increased demand, which is regrettable as difficulty just increased again ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
21794 2014-03-10 08:11:42 3:21:07 2512348484 20667 0.00000000 289844 25.05346277 74 confirmations left ![Angry](https://bitcointalk.org/Smileys/default/angry.gif) Compare your proportion of shares to total share in this block to adjacent blocks that you mined (20667/2512348484 for this block). If this is significantly lower for this block, it would give you a clue what happened (you lost hashing or internet connection towards the end of this block, and were 'punished' by Slush's 'anti-hopping' method). It could have been some internet connectivity problem to Slush's pool which is beyond your control. My reward for this block was within the normal range. Cheers
|
|
|
Hey all,
I wanted to give a couple of these for gifts to start getting some family into the basics of mining... I guess I'm looking for a price check on these guys and to see if anyone has any in stock.
If not, what would you recommend for a *cheap* alternative/replacement for these?
I'm thinking of retiring my BE's - do you want to buy some?
|
|
|
Slush pool down for anyone else? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) stratum.bitcoin.cz:3333 (running a single Cube on a proxy) Thanks! Hi guys,, my miner is still saying slush's is down,, is it down for anyone else? "stratum.bitcoin.cz:3333" (running avy 200) Using "stratum+tcp://stratum.bitcoin.cz:3333" here (this is what http://support.bitcoin.cz/Knowledgebase/List recommends). My miners did not experience any recent connectivity problems. Using a few instances of bfgminer and cgminer. Cheers
|
|
|
10 minutes before that last round ended I lost a 18Gh miner (USB block eruptors on 49 port hub) of 150Gh But my reward dropped dramatically, is this the normal anti pool hopping function?
21778 2014-03-07 18:30:01 0:27:44 328834023 25558 0.00151151 289400 25.19039733 88 confirmations left 21777 2014-03-07 18:02:17 7:09:21 5163733392 961604 0.00433911 289397 25.04442805 85 confirmations left 21776 2014-03-07 10:52:56 8:21:04 6046842824 1122289 0.00455703 289351 25.09531241 39 confirmations left
It seems Slush has lowered the constant - it used to drop much more than that before (or it was less than 10 min drop for you). It very well may have been less then 10 minuets, loosing 70% of my reward for a 15% drop in hash power just before round ends doesn't seem right. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) I actually had a 21% higher reward for Slush block #21778 than my proportional share. Looks like there was some 'hiccup' in the pool, which "kicked" those with diminished connections (see recent posts on connection problems to Slush). Those who were less impacted had a sudden/unjustified boost. Cheers
|
|
|
|