how do i get zcash wallet address?
zcash-cli getnewaddress where i download zcash client? any link bro for windows?
|
|
|
how do i get zcash wallet address?
|
|
|
I am getting 7 sols with gtx 1070, and 8 with gtx 1080, am I doing something wrong?
i got this pool http://zcash.flypool.org/how u get wallet address? n which miner u r using? is there any official thread for zcash @ BCT?
|
|
|
yesterday everything working fine but today i am getting too much errros like
ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999 ETH: Stratum - Failed to connect, retry in 20 sec..
ETH: Stratum - socket send failed 10054, disconnect ETH: Connection lost
ETH: Stratum - socket send failed 10054, disconnect ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999
Can you pin the above address without any problem? It might be related to your internet service provider. internet is working fine bro. and i tried this pool also us1.ethpool.org:3333 same error and how to pin address? sorry i am newbie Maybe he is referring to PING command in CMD. in windows open command prompt or CMD, and TYPE ping eth-asia1.nanopool.org THEN Press enter if you receive replies then your connection is good. :-) here is the ping result Pinging eth-asia1.nanopool.org [103.3.62.64] with 32 bytes of data: Reply from 103.3.62.64: bytes=32 time=300ms TTL=52 Reply from 103.3.62.64: bytes=32 time=328ms TTL=52 Reply from 103.3.62.64: bytes=32 time=314ms TTL=52 Reply from 103.3.62.64: bytes=32 time=316ms TTL=52 Ping statistics for 103.3.62.64: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 300ms, Maximum = 328ms, Average = 314ms If the ping works then perhaps it is the port that is blocked. Perhaps your firewall/router/proxy is blocking the ports 3333 and 9999. i tried with cyberghost and everything working fine. thanksalot all bros. for helping me
|
|
|
yesterday everything working fine but today i am getting too much errros like
ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999 ETH: Stratum - Failed to connect, retry in 20 sec..
ETH: Stratum - socket send failed 10054, disconnect ETH: Connection lost
ETH: Stratum - socket send failed 10054, disconnect ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999
Can you pin the above address without any problem? It might be related to your internet service provider. internet is working fine bro. and i tried this pool also us1.ethpool.org:3333 same error and how to pin address? sorry i am newbie Maybe he is referring to PING command in CMD. in windows open command prompt or CMD, and TYPE ping eth-asia1.nanopool.org THEN Press enter if you receive replies then your connection is good. :-) here is the ping result Pinging eth-asia1.nanopool.org [103.3.62.64] with 32 bytes of data: Reply from 103.3.62.64: bytes=32 time=300ms TTL=52 Reply from 103.3.62.64: bytes=32 time=328ms TTL=52 Reply from 103.3.62.64: bytes=32 time=314ms TTL=52 Reply from 103.3.62.64: bytes=32 time=316ms TTL=52 Ping statistics for 103.3.62.64: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 300ms, Maximum = 328ms, Average = 314ms
|
|
|
yesterday everything working fine but today i am getting too much errros like
ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999 ETH: Stratum - Failed to connect, retry in 20 sec..
ETH: Stratum - socket send failed 10054, disconnect ETH: Connection lost
ETH: Stratum - socket send failed 10054, disconnect ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999
Can you pin the above address without any problem? It might be related to your internet service provider. internet is working fine bro. and i tried this pool also us1.ethpool.org:3333 same error and how to pin address? sorry i am newbie
|
|
|
yesterday everything working fine but today i am getting too much errros like
ETH: Stratum - Cannot connect to eth-asia1.nanopool.org:9999 ETH: Stratum - Failed to connect, retry in 20 sec..
ETH: Stratum - socket send failed 10054, disconnect ETH: Connection lost
ETH: Stratum - socket send failed 10054, disconnect ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <103.3.62.64> port 9999
|
|
|
hello i am mining with 4 cards 3 sapphire 1 gigabyte miner work first 5 minutes and giving hashrate of 18 18 16 15 but after 5 minutes hashrate will 18 18 16 0
pls guide me why this happing
and i am getting error
watch dog gpu 4 hangs in opencl call, exit
Try swapping the cards around e.g. put 4th GPU in the primary PCI-E slot. there is these slots in my MOBO 1 PCIEX16_1 2 PCIEX16_2 3 PCIEX1_1 4 PCIEX1_2 5 PCIEX4_1 6 PCIEX4_2 7 PCI so in which slot i put my 4th card?
|
|
|
hello i am mining with 4 cards 3 sapphire 1 gigabyte miner work first 5 minutes and giving hashrate of 18 18 16 15 but after 5 minutes hashrate will 18 18 16 0
pls guide me why this happing
and i am getting error
watch dog gpu 4 hangs in opencl call, exit
|
|
|
GPU2, OpenCL error 36 cannot write buffer for DAG
what does that mean? than miner restarts
|
|
|
It depends of the retail price of each. The 8 Gb version is indeed better, and if there's only 20$ of difference, take the 8 Gb. If more, tell it here and I will help you choose.
Could you also tell me what are the other components you will use ?
120ssd 4 8gbram 990fxa ud3 r5 or asrock b85 aneversary 850watt PSU 6 RX470 Very nice. Take the B85, I have that one and I love it. I don't know the other one. For the CPU, don't ruin you, just take a G1820 or G1840. Now I'm waiting for the picture of the final build ! sorry bro i didnt reply cause there are some problem in my family and thanks alot for for helping me. i am buying this one http://www.ebay.in/itm/191971183863but this has only 1 fan will it work?
|
|
|
my wllet is offline plz provide me nodes
You do not need nodes. The 7 seednodes are hardcoded into the wallet, discovering peers via the seednodes is best. Are you running version 1.3? i am using this version evergreencoin-qt-win-v1.3.0.0 i need because my wallet in syncing mode since 3.10.2016 it stucked on block 653741 and 0 avtive conection Nodes is not your problem. It is more probable you need to resync your wallet. Follow these steps: 1, Close your EverGreenCoin wallet. 2, Navigate to %appdata%/EverGreenCoin within Windows Explorer. (otherwise stated, C:\Users\<Windows User>\AppData\Roaming\EverGreenCoin) 3, Delete everything in that folder except your wallet.dat file. 4 (optional), follow: https://bitcointalk.org/index.php?topic=1378653.msg15797264#msg15797264 to load a snapshot. This might be faster than snycing over the network. 5, Launch the wallet. thanks sir which file i download from this link https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg because there r many files with diffrent sizes The one that starts with "EverGreenCoin" my behavior like dumb fk how i said that i cant beleive i am dumb
|
|
|
It depends of the retail price of each. The 8 Gb version is indeed better, and if there's only 20$ of difference, take the 8 Gb. If more, tell it here and I will help you choose.
Could you also tell me what are the other components you will use ?
120ssd 4 8gbram 990fxa ud3 r5 or asrock b85 aneversary 850watt PSU 6 RX470
|
|
|
my wllet is offline plz provide me nodes
You do not need nodes. The 7 seednodes are hardcoded into the wallet, discovering peers via the seednodes is best. Are you running version 1.3? i am using this version evergreencoin-qt-win-v1.3.0.0 i need because my wallet in syncing mode since 3.10.2016 it stucked on block 653741 and 0 avtive conection Nodes is not your problem. It is more probable you need to resync your wallet. Follow these steps: 1, Close your EverGreenCoin wallet. 2, Navigate to %appdata%/EverGreenCoin within Windows Explorer. (otherwise stated, C:\Users\<Windows User>\AppData\Roaming\EverGreenCoin) 3, Delete everything in that folder except your wallet.dat file. 4 (optional), follow: https://bitcointalk.org/index.php?topic=1378653.msg15797264#msg15797264 to load a snapshot. This might be faster than snycing over the network. 5, Launch the wallet. thanks sir which file i download from this link https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg because there r many files with diffrent sizes
|
|
|
thanks all bros for help me
ok one more question which brand of RX480 will give me good hashrate like ASUS or GIGABYTE OR SAPPHIRE
Sapphire is the best I think. So many people including me use them here. They're cheaper, have a good cooling, a nice aspect (might be worthless to some but not to me) and have ball-bearing fans that will make them last longer. for 6 RX480 which PSU sufficient? RX 480 has a TDP of 150W, so 6x150=900. To be sure, I would at least take a 1000W, of at least a golden efficiency. However, I do strongly recommend a 1200W one, or two 750W is the best for me. That would allow you some spikes and some overclocking. thanks again bro should i go with 750+650 PSU or 650+650 because i need to lower my invesment 650+650 is far enough my friend. Do however take care of taking a good efficiency PSU, since from bronze to gold, you're saving 10% off on the electrical bill ! However, I tend to prefer the RX 470. Could you tell me why you prefer to go with RX 480s ? so u mean i go with RX470? which one 4GB or 8GB how much hashrate i willget from 470? I'm not saying you to go with RX 470. Maybe you have good reasons with RX 480. Could you please tell me why you chosed those ones ? Do you have an high electricity rate ? no bro i dont have any good reason for 480 some said me that 480 is best so i asked here. ok so i am going with rx470 and i searched that it consumes less power than 480 That's why I took those ones. A lower TDP by about 50% (110W vs 150W), that mean also less bigger PSUs but there's also a lower retail price. Less consumption and less initial investment makes it the best for me. All that good points are only to mix with 2 MH/s less ! I ordered three today for these reasons ! so which rx470 4gb or 8 gb?
|
|
|
my wllet is offline plz provide me nodes
You do not need nodes. The 7 seednodes are hardcoded into the wallet, discovering peers via the seednodes is best. Are you running version 1.3? i am using this version evergreencoin-qt-win-v1.3.0.0 i need because my wallet in syncing mode since 3.10.2016 it stucked on block 653741 and 0 avtive conection
|
|
|
my wllet is offline plz provide me nodes
|
|
|
thanks all bros for help me
ok one more question which brand of RX480 will give me good hashrate like ASUS or GIGABYTE OR SAPPHIRE
Sapphire is the best I think. So many people including me use them here. They're cheaper, have a good cooling, a nice aspect (might be worthless to some but not to me) and have ball-bearing fans that will make them last longer. for 6 RX480 which PSU sufficient? RX 480 has a TDP of 150W, so 6x150=900. To be sure, I would at least take a 1000W, of at least a golden efficiency. However, I do strongly recommend a 1200W one, or two 750W is the best for me. That would allow you some spikes and some overclocking. thanks again bro should i go with 750+650 PSU or 650+650 because i need to lower my invesment 650+650 is far enough my friend. Do however take care of taking a good efficiency PSU, since from bronze to gold, you're saving 10% off on the electrical bill ! However, I tend to prefer the RX 470. Could you tell me why you prefer to go with RX 480s ? so u mean i go with RX470? which one 4GB or 8GB how much hashrate i willget from 470? I'm not saying you to go with RX 470. Maybe you have good reasons with RX 480. Could you please tell me why you chosed those ones ? Do you have an high electricity rate ? no bro i dont have any good reason for 480 some said me that 480 is best so i asked here. ok so i am going with rx470 and i searched that it consumes less power than 480
|
|
|
thanks all bros for help me
ok one more question which brand of RX480 will give me good hashrate like ASUS or GIGABYTE OR SAPPHIRE
Sapphire is the best I think. So many people including me use them here. They're cheaper, have a good cooling, a nice aspect (might be worthless to some but not to me) and have ball-bearing fans that will make them last longer. for 6 RX480 which PSU sufficient? RX 480 has a TDP of 150W, so 6x150=900. To be sure, I would at least take a 1000W, of at least a golden efficiency. However, I do strongly recommend a 1200W one, or two 750W is the best for me. That would allow you some spikes and some overclocking. thanks again bro should i go with 750+650 PSU or 650+650 because i need to lower my invesment 650+650 is far enough my friend. Do however take care of taking a good efficiency PSU, since from bronze to gold, you're saving 10% off on the electrical bill ! However, I tend to prefer the RX 470. Could you tell me why you prefer to go with RX 480s ? so u mean i go with RX470? which one 4GB or 8GB how much hashrate i willget from 470?
|
|
|
thanks all bros for help me
ok one more question which brand of RX480 will give me good hashrate like ASUS or GIGABYTE OR SAPPHIRE
Sapphire is the best I think. So many people including me use them here. They're cheaper, have a good cooling, a nice aspect (might be worthless to some but not to me) and have ball-bearing fans that will make them last longer. for 6 RX480 which PSU sufficient? RX 480 has a TDP of 150W, so 6x150=900. To be sure, I would at least take a 1000W, of at least a golden efficiency. However, I do strongly recommend a 1200W one, or two 750W is the best for me. That would allow you some spikes and some overclocking. thanks again bro should i go with 750+650 PSU or 650+650 because i need to lower my invesment
|
|
|
|