It seems that all of us are affected I have a problem mining on a few pools and most of them are related to the DNS issue. It seems that the issue above is not related to hardware it might be because of the connection between the miner and the pool. My miner is running on idle mode recently and until now after I check noticed abnormal issues after trying to access the ViaBTC pool it says "The site cannot be reached" and then "DNS prob problem".

So I tried to research a bit and found some news and tweets and confirmed that I'm not the only one who experienced this.
Here's a few of them

- https://finance.yahoo.com/news/multiple-mining-pools-facing-connectivity-113938180.html
- https://twitter.com/SinoCrypto/status/1463943278039023620?ref_src=twsrc%5Etfw

If you search on Google you can find a few calculators the same as that.

Check these links that I found and I think these are what you looking for

This one have limited coin but they have many listed coin than the link you posted above
- https://www.cointimemachine.com/

And this one below you can manually add the crypto that you'd like to check the profit.

- https://criptomo.com/en/calculator/

Already tested them and it seems works fine.

Actually, Bitmain doesn't have a guide if it's related to a hardware issue they will always recommend you to send the hashboard back to them for warranty repair.

ZeusBTC centers are not only in China they have many centers in different countries you just need to read the link that I posted above and choose which country is near you.

Or you can troubleshoot that hashboard there is a guide from ZeusBTC that you can follow on how to check each ASIC chip through test points.
You can find it here https://www.zeusbtc.com/articles/information/170-antminer-s17-manual-download

About software where you can ignore the other ASIC chip well you can try Braiins OS I don't think you can able to disable those affected chips but you can try to ask them on BraiinsOS official thread here https://bitcointalk.org/index.php?topic=5036844

Everything from your logs are abnormal look at the fan all of them shows 0 and the Vo and PS(Related to the power supply) show 0

Bootby is related to AM_BOOTBY_POWRON
So it might be a PSU issue.

What I would like to suggest is try to flash it first with the latest firmware available from Canaan here https://download.canaan-creative.com/
Then test it again if it doesn't solve your issue try to disconnect all cables from the unit and replug them all and try to run it at normal mode instead of performance mode.

Let see if there are changes on the logs.

Next time try to learn how to read the logs you can download the description logs from here https://canaan.io/wp-content/uploads/2020/03/log-Description.pdf

It depends on what wallet you use because there are some wallets that doesn't have a change address or you can disable it manually like Electrum you can disable that function.

Change address was generated for privacy purposes and it is an address where the remainder is being sent to your other address after you send a specified amount to the receiver.

Actually, it's no different there is also a coin control feature where you can choose any UTXO to spend. It is likely you have other dollars in your wallet sample you have $20 and $5 in your pocket since the coffee price is $5 you can pay it with your $5.

Based on what I understand you want to deposit on that platform with USDT in TRC20 as a sample and then users can able to request a withdrawal from your website to any coins they want which is auto-convert from USDT to any crypto?

Never heard of any website that can able to do that but try to check the "Self Managed Commerce merchants" from Coinbase commerce it seems that is what you looking for but they only have limited coins support I guess.

It could be a PSU or a controller look at this Vo[0] PS[16 1187 0 3 0 1216 75] at the first value you have 16 which indicate a power failure or short circuit.

Can you try to flash it first with the latest firmware available on canaan? and then test it again.
Also, the miner is working at performance mode according to your logs WORKMODE[1] would you mind try to run it at normal mode then test it again let see any changes of the logs after you do all my suggestions.

If you directly bought this unit from Canaan log the above suggestion better contact Canaan support and maybe they will give you a firmware that could fix this issue.

According to the Binance announcement, those who are still not KYC verified won't be able to trade or use any products and services available from Binance.

So I think he won't be able to trade or convert any crypto from his wallet the only option for the non-KYC verified account is to withdraw.

All you need is already on the sticky thread on this section why not read them first instead?
Or you can just go read them here https://bitcointalk.org/index.php?topic=4636521.0

Actually, it's a basic thing it's just like a Plug'n'Play you need to set up the ASIC miner and a pool where you want to mine and make sure you can provide a 220v directly from the wall outlet.

When exactly did you create your wallet?

Based on your Electrum wallet the Bitcoin went to your wallet and sent right away after it confirms there is a 15 minutes gap before it's sent to another wallet which I think I believe someone already has control of your wallet. They created a script to automate sending BTC if the wallet receives any amount of BTC. That script was spreading before I think last 2019.

So when was the first time you created your wallet?
If your wallet was created before 2019 and installed Electrum lower than 3.4.4 before then maybe you accidentally updated it with the fake version of Electrum and you can't just remember because it was long ago and now you send BTC from Coinbase to Electrum and you think that you didn't receive the BTC that Coinbase sent you. So you decided to reinstall the wallet and use the latest one?

Actually, a PC/laptop that is always connected online has always vulnerable to any attacks without any protection your Pc/Laptop can be infected with malware and viruses.
Also, don't use the free antivirus from Microsoft they actually useless if your pc doesn't have any security protection then your wallet is already compromised.

Would you mind trying the NeuroticFish suggestion, scan your PC and let us know if it detects anything? Use Malwarebytes and Kaspersky you can use the trial to fully scan your PC.

Coldcard will not appear in your computer without the pin if you type and open your coldcard with pin code it should show up in your PC or device manager.

If it doesn't detect there is a connection issue between your coldcard wallet to PC you must check the MicroUSB cable and the MicroUSB port. You can try to clean it isopropyl alcohol/ petrol or thinner and maybe the MicroUSB port is full of dirt.

If it still doesn't work then your MicroUSB port needs to be replaced with a new one so you will need to hire someone to replace it for you or do it with yourself.

Another option is to use it as an airgapped just like the above said so you will need to generate a wallet directly in your coldcard you can find it under Advanced>MicroSD Card>Export Wallet>Electrum Wallet it should generate a skeleton file or wallet.json file that you can import to Electrum. The guide is already on NeuroticFish video above

You almost did all basic thing but have you tried to run only one hashboard I mean keep the chain 2 running and disconnect the other two hashboard and test if it still detects only 10 ASICs.


If you don't have skills your best option is to bring them to the professional technician about ASIC hashboard ZeusBTC is one of the known who can repair these boards and they have lots of repair centers where you can send them but the problem is they don't have a center in Indonesia.
But if you still want you can check the list of their repair centers here https://www.zeusbtc.com/ASIC-Miner-Repair/

Another option is to buy a replacement hashboard you can directly buy it on Bitmain or buy on ZeusBTC.

How do you think you give your account then? Adding a payment method is where you will receive the amount you exchange from the seller.

You will still need to add a payment method in order for the seller to send the amount you exchange to the payment method that you add in your P2P account without adding it you won't be able to exchange anything from Binance P2P.

You just didn't understand how Binance P2P works but if you already have an account on Binance check it there and I'm sure you will still need to add a payment method where you will receive the money you can add the payment method it could be a bank account or any other payment methods available in your country. You can also try to add the payment method of your friend's bank account but I do not know if it will work because based on my experience on Binance P2P they don't allow me to add other payment method or bank account that doesn't have the same name if what name you registered on Binance you must use an account with the same info or name when adding a payment method.

All I see on the logs you have are related to power it seems that your problem is your PSU. I don't have much knowledge about this miner because the logs are different compared to other Antminer machines.

Why not try to run your miner with one hashboard or do one by one test you can follow the guide from this link below
- https://support.bitmain.com/hc/en-us/articles/226142788-Test-hash-board-one-by-one

Maybe your PSU is not giving enough power that is why your miner is not running properly if you could test them one by one and all are running properly then your PSU is the culprit. Also, don't forget to test mine on another pool.

How did you flash your miner through an SD card? Did you extract firmware that you download from bitmain?
There is two SD card firmware for s11 7007 and 7010 you must download a specific firmware for your miner then extract and put all extracted file to the SD card.
If it was successfully flashed with an SD card you should notice some changes on the firmware version under the miner dashboard but if the SSH still doesn't open then try to hard reset the unit by holding the IPreport/Reset button for 10 to 15 seconds then release.

Why not read the wiki instead?
Here's the link https://en.wikipedia.org/wiki/Bitcoin and this https://simple.wikipedia.org/wiki/Bitcoin

Or go directly on the Bitcoin wiki here https://en.bitcoin.it/wiki/Main_Page

You can also watch videos about Bitcoin which are recommended for newbies to understand how bitcoin works.
Check the videos below.

- https://www.youtube.com/watch?v=s4g1XFU8Gto
- https://www.youtube.com/watch?v=L-Qhv8kLESY

If you want to be an ASIC reseller make sure that you can be trusted. Buying ASIC machines on unverified resellers and distributor are risky so if you are buying on Alibaba and Aliexpress those are 3rd party reseller but the manufacturer said that they don't have any verified reseller on Alibaba and Aliexpress except to Newegg.

So I suggest you always buy ASIC machines directly from manufacturers and verified distributors. You can find the list of manufacturers and distributors from this link below
- https://bitcointalk.org/index.php?topic=5045732.0

Or try to contact offordscot if you want help to find an ASIC machine that you can resell.

Why not try to tell him to connect his ledger to Electrum and follow Lucius's suggestion above(It seems it doesn't work to you).
Or get the master public key of that wallet and use a tool called xPub analyzer you can find it here https://blockpath.com/wallets/new?action=appxpub
It could scan all possible paths and find the used addresses.

Another option is the tool from Ledger they have their own xPub scanner created a few months ago and this should be the tool you must use if you want to recover your wallet.
Here's the link:
- https://github.com/LedgerHQ/xpub-scan

Just edited the link I forgot to put the link of ledger xPub scanner.

You can try to contact them through their email you can find it here https://canaan.io/about

Or you can contact them through their social media accounts check this links below

- https://www.instagram.com/canaantech/
- https://www.facebook.com/Canaansupercomputing/?modal=admin_todo_tour
- https://twitter.com/canaanio

Are you trying to promote these websites?
Actually never heard of these websites and I do not recommend using firmware from that source it could be a virus.

Maybe your miner SD card reader doesn't work properly if you can disassemble the unit check the control board then check the terminal of the SD card maybe it has some rust and corrosion clean them with petrol or isopropyl alcohol. Then try to flash it again through an SD card and use firmware only from Bitmain

Why not tell your friend to make a Binance account so that you can directly send BTC to him and exchange it into fiat through P2P?

Adding another payment method to your Binance account should be the same name as what you use in your Binance account. So you can't able to use other's bank account to exchange crypto to FIAT.