Thanks Kramble, I was googling "build Xilinx JTAG platform cable" which did not yield any helpful results.

I have a load of veroboard lying around and plenty resistors etc. Will maybe try and build one out of interest if I can dig out a suitable buffer / driver IC.

Hi,

I have ordered a programming cable on Ebay, but am too impatient to wait on it arriving! Kramble mentions on his Github that it's easy to build one but haven't found any obvious instrcutions after googling.

Hopefully I will have the cable within a few days.

Hi,

I have tried both lan / wifi also tried a different internet connection / router it seems consistently high. Now getting intermittent ASIC failures on the status page which I'm assuming is not good!

Your second unit seems to be running around 10% errors unless my calcs are wrong?

I have one running at 3% which seems a bit high too.

Hi,

I am trying to mine blakecoin using a Lancelot board. Am I correct in thinking I need to do the following:

1. Use impact utility to flash the Lancelot board - this requires a JTAG programmer.
2. Mine with modified cgminer

Am I missing anything here? Can anyone point me in the direction of instructions to build the Jtag Cable?

I have managed to successfully mine using my 7950 rig.

Thanks.

Hi Joel,

Looking at the coin2 pool, the hashrate looks very low - what is being done to increase this and prevent 51% attacks?

Thanks.

Hi,

Is the giveaway still active or have you reached 1000?

Thanks.

0.07 BTC sent

Txid bfaf70b55f6593f26eba1e19039af03100d8407a30c1f12acaf8321813b9d4b0

Hi,

Does anyone know, or could Dan confirm is the user called "furseleer" selling BTC (over 150BTC sold) on localbitcoins the same person?

Thanks.

Now we see why the launch was delayed yesterday - the windows client is "buggy"!

As the devs are clearly monitoring this page, perhaps they would be good enough to at least let us know what is happening and when - do they think it's fair for us to sit and wait for them all night?

Clearly everybody waiting for information is crashing the site so until they provide some information it will continue to crash.

Slightly worrying if this isn't obvious!

USBo4ncBVVpTvTAsxpfyEcisuRsNxyZ97U

Thank you!

Reddit username

Trunk9191

Thanks, yes there is more in another wallet but I got fed up following that so I assume it's the main giveaway one!

Here is some of the premine:

http://altexplorer.net/address/4FDyGJ9Lwbw4GKyQnzwuthk2GLjJiGeRQb

Still trying to follow the rest as it has been passed from address to address literally hundreds of times.

Maco (the dev's assistant) is showing as online now - hopefully we will hear from him soon what is being done to keep the promotion of the coin going!

As an aside the buy / sell depth chart on cryptsy is now looking promising.

As for what happened to the premine there are references to this earlier in the thread if you care to read / search back.

EDIT:

This link should help:

http://altexplorer.net/block/f540ad3fca5831ee9537bafd92aa7fc0dc96a9c3016544e95d55553ff4f25273

Supply and demand!

Supply is increasing on a daily basis due to mining, there is no reason for demand to increase after the initial buzz and even if demand remained static prices would drop as supply goes up.

As prices drop further, some who held at over 1000 will sell rather than risk losing all they have!

In order for demand to increase, the coin needs publicity - national news, Keiser report etc etc.

The business insider article is difficult to find from the BI home page and has been read by less than 10000 people - mostly from this thread I suspect (this thread has over 50k views).

One other issue is that the coin has a name which is difficult to search for - try googling 42 or even search for 42 on business insider and you will see what I mean.

This could be aided by always referring to the coin as 42COIN with no spaces!

Suggest we all pool together and try and get publicity and reward anyone who does with lots of dents!

Spike / jumping? I don't see it!

I have also lost dents on happyminers - I have tried the contact support function on the pool site which doesn't seem to work, have posted on this thread and sent a PM to swifty1337 who I believe runs the pool, all with no response.

Hendo / Maco  can you please at least put a warning on page 1 of this thread until someone from Happyminers can explain what's going on?

Thanks.

Interestingly enough the current value is roughly a cent per dent!

Foxley, what about inverting CAPS lock, in case it was on when you entered the password?

Sorry if this is too obivous!

Maurizio, cryptsy limit is already 4000.