Latest posts of: DjNorad

well... i'm almost sure, that we are not enough active supporters here to make enough "free" votes for MRC on cryptsy....

With only "free" votes we don't seem to have a chance.... if i have a look at the voting-list there...

Quote from: DjNorad on March 05, 2014, 06:52:41 AM

Quote from: Gaboer on March 05, 2014, 04:39:14 AM

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

this happened before... there seems to be hanging a cron job at the server which refreshes statistical-data

in the past all shares were still processed and we all got our coins which were found in between as soon as this deamon was restarted....

it just happened as i announced... all coin and statistics are back online.... nothing was lost...

Quote from: Gaboer on March 05, 2014, 04:39:14 AM

Anyone on nut2pools?
https://mrc.nut2pools.com/index.php?page=statistics&action=blocks

No blocks for 3 hours, and last block has 0 shares....what could be wrong?

Quote from: halibit on March 05, 2014, 12:43:14 AM

Sure I'm in too.
I have no time to help much but I will support your "mission" with coins sure.

Same for me if i see there is a good plan Wink

Quote from: zerxus on March 04, 2014, 03:16:01 PM

Quote from: Rednocker on March 04, 2014, 02:38:59 PM

We need a mature exchange fast. Polo is crippled and mintpal isn't moving.

So why nobody's voting here http://www.reddit.com/r/CoinedUp/comments/1xbqp0/please_add_mrc_to_your_exchange/?sort=new ?

I monitor a few more crypto currencies more or less similar to MRC and communities there are more active, 20-30 people vote on first two days comparing to our 48 comments and 29 upvotes in 24 days.

We all are responsible that MRC is not well-promoted yet.

now or never ... right? we are close to Peak-Block-Reward....

What is the matter with AUR ? why are they so keen about that coin?

now as it wents intereresting u wanna "PM" that ??

tz tz tz..... ;-) Grin

Seems as i managed it to get working again....

;-)

Blockchain is actually redownloading....

@ halibit:
Thanks a lot for your help...

Quote from: halibit on March 01, 2014, 10:33:52 PM

Have you any change in your computer?

only change was installing the new battle.net launcher from blizzard since i played a lil bit diablo today

i already tried to shut the launcher down.... no effect.... i didn't try an uninstall yet since its a kind of a needed tool

btw: the 360 seconds blocking between postings here is a pity....

/edit:
oh, there was another special thing today... i had an automated display driver reset while playing diablo (screen was flickering shortly and got a balloon note from windows tray) and then i saw a "SICK" GPU in the microcoinminer .... thats why i restarted the PC.

Quote from: halibit on March 01, 2014, 10:28:17 PM

Have you make any modification in conf file?
If not, try if it works with empty wallet (rename your wallet.dat for some else)
Then we know is problem in your computer or wallet or conf file.

- i have a new wallet.dat in roaming dir (i moved my original one out there)
- my microcoin.conf is unchanged since february 11th and worked fine till today, but even when i move that file out, it has no effect... the crash is still there...

i also re-unzipped the program files folder freshly from the archive (from february 21st) .... so the files should be ok too....

Hmm.. suddenly my wallet started to crash now when staring....

No idea why it started acting so now....

Its newest version...

i already cleared roaming and program files dir of microcoin... so it should be like a fresh install....

nevertheless it still crashes at startup....

Quote

************************
EXCEPTION: N5boost10filesystem16filesystem_errorE
boost::filesystem::remove: Der Vorgang wurde erfolgreich beendet: "C:\Users\MyUser\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup\microCoin.lnk"
C:\Program Files (x86)\MicroCoin\microCoin.exe in Runaway exception

can anyone help?

Quote from: illodin on February 27, 2014, 11:16:40 PM

Quote from: amdfxman1701 on February 27, 2014, 07:03:16 AM

There seem to be a lot of Micro Coin miners, but are any of you also buying shares into the Alcurex Exchange IPO? How do ya'll feel about it? Not much action going on on their page.

I'm tempted to invest but imo it's just too risky considering what has been happening with all these new exchanges lately.. hacks and bugs and problems everywhere. All it takes is one bug somewhere or security aspect overlooked and it could go under. But then again, if there's no risk there's no gain. Maybe I'll invest 0.05 BTC and consider it lost and if I actually get it back as profits it'll be a nice surprise and bonus. Cheesy

yeah agreed.... of course... i think that too.... i mean that its risky... one security fault could kill the project.... but investing around 0.05 BTC is worth a try

Quote from: Last1212 on February 26, 2014, 08:08:51 AM

Remove all buy offers!!! We must dump this coin hard!!! Or we will stack on this low prices!!!

Can u explain plz?

i'm curious... why would we have to dump to get the price up?

Quote from: linkme on February 26, 2014, 06:51:09 AM

Pools are unaware of the change in the code, and they estimate based on the block number. Its definitly happening at 21210.. you can see it in the code right here:

https://github.com/suncoin/suncoin/commit/136c212f96fe2e5ba9ef8e5be69e3576d5b857c0

13 blocks to go!

Thanks a lot for this answer ;-)

Let's go for it ;-)

weird...

official pool says:

Quote

Network Info
Difficulty    4.73850464
Est Next Difficulty    0.19686464 (Change in 406 Blocks)
Est. Avg. Time per Block    24 minutes 4 seconds
Current Block    21194

that would be at Block 21600 ?!?? not 21210 as announced.... which is to be believed now?

Quote from: lemfuture on February 25, 2014, 09:01:12 PM

Quote from: katrin69 on February 25, 2014, 08:59:57 PM

I have only 180Kh on 7950! What i make wrong? Help plz:

microCoinminer.exe -o xxxxxxxxxxxxxxx -u xxxxx -p x --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 --thread-concurrency 22400 -I 19 -w 256 --gpu-engine 980 --gpu-memclock 955 --auto-fan --gpu-fan 60-95 --temp-target 70,70,70,70

your url..

very very helpful answer.... Angry

Hi there...

since the last nFactor switch i really don't get my ATI 6950 (1GB) und 6870 (1GB) mining properly any more in my 1st PC...
i actually get lots of HW-errors for the 6950 :-(
even with massively lowered intensity...
Result is: only <= 100kH/s and that with hell lot of HW-errors on the 6950 (but there are no HW-errors on the 6870 though)

1st PC with 6950 and 6870:

Quote

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
microCoinminer.exe -o stratum+tcp://mrce[Suspicious link removed]t2pools.com:6000 -u A -p B --scrypt --Nfmin 4 --Nfmax 30 --StartT 1389028879 --queue 0 --scan-time 2 --expiry 4 --thread-concurrency 8000 -I 12,11 -g 1 -w 256

My other PC (my Rig) with 3* 280X runs O.K. --> Hashrates app. 305 kH/s per card
It runs fine even with higher intensity since i increased the thread-concurrency from 8000 to 16384...

2nd PC (=RIG) with 3* R9 280X (3GB):

Quote

Anyone having a helping idea? ;-)

Regards

Something is going wrong actually....

ALL big Pools are actually stucked at Block #123999....

All are over 1000% expected shares....

Whats wrong?

Quote from: Philll90 on February 16, 2014, 10:57:55 PM

Hi,

how much hashrate should I get with a R9 280X gpu at the current nfactor?
And when is the next change?

Thanks a lot!

app. 550 to 650 KHash/s - depending on your parameters for the gpu-clocking ...

current Nfactor should be 9 if im not wrong ...

next change: should be on february 23rd ...

Greets Wink

I got good results with following parameters

start.bat

Quote

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECT 1
cgminer --scrypt -o stratum+xyz.com:3334 -u user.1 -p x --expiry 5 --scan-time 5 --queue 0 --lookup-gap 2 --thread-concurrency 8000 -I 17 -g 1 -w 256

maybe this example could help you....

the red parameters reduced my amount of rejected files a lot....