Dev is rich I'm really hopе that dev is rich. He deserve this. He spend hundred of hours developing the coin and all features. You lazy bastards. Stop trolling and start working!!!
|
|
|
It's time to buy I think i will wait for it to get back to $2 before buying more! Its going back down to a more normal price +1 the last days have been too pumpy... no we get the the dumpy I don't think so, big boys pumpers haven't finished. It's just too much profit they can make, no other coin held price so well after their peak dump, so surely they'll go for another round. They'll keep going for as long as there's a good support and no massive sell out. It's been already tried 5 times and we keep going. With such volume, and support there's no better aim for these guys, they are making big bucks... It's a good symbiosis all in all, folks make money, floor goes higher, way to go until the adoption and the real boom. When that happens though, last pump is going to look weak. +1 They are buying now and they gonna sell around 25 May @ 0.025+ Too many zero's still in that price Sorry, i mean 0.25
|
|
|
It's time to buy I think i will wait for it to get back to $2 before buying more! Its going back down to a more normal price +1 the last days have been too pumpy... no we get the the dumpy I don't think so, big boys pumpers haven't finished. It's just too much profit they can make, no other coin held price so well after their peak dump, so surely they'll go for another round. They'll keep going for as long as there's a good support and no massive sell out. It's been already tried 5 times and we keep going. With such volume, and support there's no better aim for these guys, they are making big bucks... It's a good symbiosis all in all, folks make money, floor goes higher, way to go until the adoption and the real boom. When that happens though, last pump is going to look weak. +1 They are buying now and they gonna sell around 25 May @ 0.025+
|
|
|
Can anyone take a look to see if this is normal for DRK solo mining? Tried phm/sph-sgminer with same results: card hashes fine but best share and WU always remains at 0! My .bat: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 C:\sgminer\sgminer.exe -k darkcoin -o http://127.0.0.1:9332 -u wmr -p x -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 What is your GPU? I never see before 1Mh from 1 GPU. 1Mh is not much for 1 GPU when it comes to DRK. My mistake, i was reading vert thread few mins ago
|
|
|
Can anyone take a look to see if this is normal for DRK solo mining? Tried phm/sph-sgminer with same results: card hashes fine but best share and WU always remains at 0! My .bat: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 C:\sgminer\sgminer.exe -k darkcoin -o http://127.0.0.1:9332 -u wmr -p x -I 15 -g 4 -w 128 --lookup-gap 2 --thread-concurrency 8192 What is your GPU? I never see before 1Mh from 1 GPU.
|
|
|
It's time to buy
|
|
|
Like this coin. It's a funny one. Still minting that and waiting for Polo. Gonna sell @2000+
|
|
|
LOL. This is insane. I just crack-opened my VTC paper wallet to spend it all (VTC got a little pump today) and buy some more DRK. I tried but the price kept going up and up until I had to give up and wait for some cooldown. i have done the same, sold my vert @0.0027 and buy dark still @0.007:)
|
|
|
is there a new wallet for mac?
|
|
|
I'm selling 100mon for 20DRK or 55 VTC or 0.1btc PM if interested
|
|
|
Is there a parallax p2pool network or not?
YES there is a great P2Pool for vert/plx. Go back a few pages and find http://plx.qemulab.com+1 Great pool
|
|
|
I merge-mining exe/plx for 3 hours on hashharder, I see a lot of exe-transaction to my wallet, but no one plx-transaction - is it normal?.. (I see my wallet in stats on hashharder, I see speed and % of shares, but no Scheduled Payments)
You have to wait 8hour until you receive your first payment. This is cause mined block needed 320 confirmation (approx. 8h). I mine there and wenn i stop i receive 8 more hours coins
|
|
|
I'm unable to get any shares submitted to qemulab.com pool.
Are there any special settings that I'm overlooking here?
Here's my conf:
{ "pools" : [ { "name" : "YM1", "url" : "stratum+tcp://plx.qemulab.com:9888", "user" : "MyActualVERTaddress, removed for privacyreasons", "pass" : "MyActualPLXaddress, removed for privacyreasons", "pool-priority" : "0" } ], "api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "kernel-path" : "/usr/local/bin", "no-submit-stale" : true, "nscrypt" : true, "gpu-threads" : "2", "gpu-engine" : "810", "gpu-fan" : "100", "gpu-memclock" : "1300", "intensity" : "15", "temp-target" : "80", "temp-overheat" : "100", "worksize" : "256", "shaders" : "1408" }
I'm not getting a single share submitted to the pool.
the confing is ok, do u use vertminer? Sgminer, had a bit of help from pool operator. But this seems like a tricky coin, I'm unable to get my hardware errors down and get a reasonable hashrate at the same time. I've been mining x11 and scrypt for over 6 months without any issues, this is my first time I try this one. So, what's the secret sauce to getting a good hashrate on these kind of coins? Anyone got a good config file for a 7950 card? u must use vertminer, this coin is nfactor not scrypt! My bad, that was my old config. I am definitely using nfactor: "api-allow" : "W:127.0.0.1", "lookup-gap" : "2", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "kernel-path" : "/usr/local/bin", "no-submit-stale" : true, "gpu-threads" : "2", "gpu-engine" : "800", "gpu-fan" : "100", "gpu-memclock" : "1250", "intensity" : "13", "temp-target" : "80", "temp-overheat" : "100", "worksize" : "256", "nfactor" : "11", "thread concurrency" : "8192" Tried swapping my shader setting with thread concurrency, but no joy. Managed to get my hw errors down, but now I'm only mining at a fraction of the hashrate I should be getting. 10Kh/s instead of 400. I'm guessing there's a sweet spot to find in these settings. Was just wondering if anyone with a 7950 has any luck finding this sweet spot. Hi, i use vert miner with my 5x7950 rig with this conf. "api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "hotplug" : "5", "kernel-path" : "/usr/local/bin", "log" : "5", "queue" : "0", "scan-time" : "30", "scrypt" : true, "shares" : "0", "auto-fan" : true, "gpu-threads" : "2", "gpu-dyninterval" : "7", "gpu-engine" : "1000", "gpu-fan" : "50-100", "gpu-platform" : "0", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "intensity" : "13", "temp-target" : "62", "temp-overheat" : "85", "temp-cutoff" : "90", "temp-hysteresis" : "3", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "shaders" : "1792", "thread-concurrency" : "8193", "no-pool-disable" : true it's work fine for me, i have approx. 2500-2700 kh on each card Haha, i just saw what i wrote before, it will be great if i can mine with 2Mh with my 7950 cards, actually it's 250-270kh each
|
|
|
I'm unable to get any shares submitted to qemulab.com pool.
Are there any special settings that I'm overlooking here?
Here's my conf:
{ "pools" : [ { "name" : "YM1", "url" : "stratum+tcp://plx.qemulab.com:9888", "user" : "MyActualVERTaddress, removed for privacyreasons", "pass" : "MyActualPLXaddress, removed for privacyreasons", "pool-priority" : "0" } ], "api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "kernel-path" : "/usr/local/bin", "no-submit-stale" : true, "nscrypt" : true, "gpu-threads" : "2", "gpu-engine" : "810", "gpu-fan" : "100", "gpu-memclock" : "1300", "intensity" : "15", "temp-target" : "80", "temp-overheat" : "100", "worksize" : "256", "shaders" : "1408" }
I'm not getting a single share submitted to the pool.
the confing is ok, do u use vertminer? Sgminer, had a bit of help from pool operator. But this seems like a tricky coin, I'm unable to get my hardware errors down and get a reasonable hashrate at the same time. I've been mining x11 and scrypt for over 6 months without any issues, this is my first time I try this one. So, what's the secret sauce to getting a good hashrate on these kind of coins? Anyone got a good config file for a 7950 card? u must use vertminer, this coin is nfactor not scrypt! My bad, that was my old config. I am definitely using nfactor: "api-allow" : "W:127.0.0.1", "lookup-gap" : "2", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "kernel-path" : "/usr/local/bin", "no-submit-stale" : true, "gpu-threads" : "2", "gpu-engine" : "800", "gpu-fan" : "100", "gpu-memclock" : "1250", "intensity" : "13", "temp-target" : "80", "temp-overheat" : "100", "worksize" : "256", "nfactor" : "11", "thread concurrency" : "8192" Tried swapping my shader setting with thread concurrency, but no joy. Managed to get my hw errors down, but now I'm only mining at a fraction of the hashrate I should be getting. 10Kh/s instead of 400. I'm guessing there's a sweet spot to find in these settings. Was just wondering if anyone with a 7950 has any luck finding this sweet spot. Hi, i use vert miner with my 5x7950 rig with this conf. "api-allow" : "W:127.0.0.1", "api-listen" : true, "api-port" : "4028", "expiry" : "120", "failover-only" : true, "hotplug" : "5", "kernel-path" : "/usr/local/bin", "log" : "5", "queue" : "0", "scan-time" : "30", "scrypt" : true, "shares" : "0", "auto-fan" : true, "gpu-threads" : "2", "gpu-dyninterval" : "7", "gpu-engine" : "1000", "gpu-fan" : "50-100", "gpu-platform" : "0", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "intensity" : "13", "temp-target" : "62", "temp-overheat" : "85", "temp-cutoff" : "90", "temp-hysteresis" : "3", "vectors" : "1", "worksize" : "256", "lookup-gap" : "2", "shaders" : "1792", "thread-concurrency" : "8193", "no-pool-disable" : true it's work fine for me, i have approx. 2500-2700 kh on each card
|
|
|
PLX and EXE received on HashHarder. It looks everything is fine with this pool.
|
|
|
PSA: THIS COIN NEEDS 320 CONFIRMATIONS FOR MINED COINS. POOL OPS, LOOK AT THE SOURCES DAMMIT.
Make proper coin spec. +1, it's look like bad prepared coin
|
|
|
I just download the wallet, it is the same. Again wallet crash. Where can i find dll's?
|
|
|
|