1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao and 19nhri7uziUj6Xh7EDFGGT491Eqgjq1HCs


Payout history from Slush's

Total: 0.12 BTC
Date   Address   Amount
2014-08-20 05:02:53    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.02962319 BTC   <-----------(showing in my wallet)
2014-08-17 16:02:36    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.05223060 BTC   <-----------(Not Showing in my wallet)
2014-08-13 14:01:18    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.01044307 BTC   <-----------(Not Showing in my wallet)
2014-08-11 01:01:17    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.01022593 BTC   <-----------(Not Showing in my wallet)
2014-08-09 04:01:14    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.01014128 BTC   <-----------(Not Showing in my wallet)
2014-08-06 03:01:22    1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao    0.01071020 BTC   <-----------(Not Showing in my wallet)
All times are in UTC.

Payout address for WestHash

19nhri7uziUj6Xh7EDFGGT491Eqgjq1HCs

Payout Address for Multipool

1QCPkgaYk8pfepa2CCgdMSpvXyNz3CYRao


Multipool BTC Payout History



Recent Payouts
Time   Block   Amount   BTC Value
Aug 20 7:10 AM   316597   6.652E-5   6.652E-5
Aug 18 8:05 AM   316233   9.9E-7   9.9E-7
Aug 17 4:26 AM   316025   1.6E-6   1.6E-6
Aug 15 9:05 AM   315730   0.00089871   0.00089871
Aug 14 6:00 AM   315533   0.00343181   0.00343181
Aug 12 6:10 AM   315218   4.0E-7   4.0E-7
Aug 11 1:45 PM   315088   2.6E-7   2.6E-7
Aug 10 2:40 PM   314914   4.4E-7   4.4E-7
Aug 09 7:00 PM   314777   1.535E-5   1.535E-5
Aug 08 2:20 PM   314530   8.6E-7   8.6E-7
Total:      0.00441694   0.00441694

I am positive it is the same wallet(by ID). There was about 10 addresses that I had generated. I see all the addresses in Armory. I Do know the addresses also that contained coins. I do not have a paper backup but I have several encrypted Digital Backups. Overnight, I have received payment from Westhash to 1 of those addresses and I also received another payment from Slush's Pool to another address I was using. Now my wallet is showing those 2 payout transactions in my wallet under the 2 different addresses(the same addresses that I had those 2 pools set to pay out to). But none of the previous transactions or balances are showing up.

I am sorry but I am a total newbie and am still learning as I go. I kept making Digital Copies in various locations though as a just in case anything happened.

Heading away to work. Tonight when I get home I'll try to set up a different fresh PC to get Armory Installed on.

Thanx for the attempt to help.

Sorry to insinuate it was your fault. That was not my intention. What happened was there is a link on that guide to DL bfgminer. I DLed it from that link and when trying to extract and install bfgminer, Avast went nutz saying the file is infected. So I just assumed that it was a false positive. So, I temporarily disabled my Avast to extract and install bfgminer. It them extracted and installed and worked. However, immediately after installing and running and hashing for the night, is when armory which was working, stopped working ending in a runtime error. Then upon scanning my system with avast, it said 2 files in my Armory install was infected. So, I then deleted the Armory files App Data. Then Armory worked again. But I had to reDL the Block Chain and rebuild the database to make armory work again. But now My wallet wont show any balances.

The guide actually worked however. As long as Avast is disabled.  

The system I am running Armory on, I access remotly using Teamviewer. I do not use this system to browse the Internet. It is my home fileserver.

It says its the latest version. It is up to 20% and says an hour left still.

Armory has been online. It is online now but its in the process of Building Databases now(12% and an hour to go it says). I dont know what Top block is or how to tell u that. Right now it says Online and 0 Blocks in green in the lower right hand corner.

Thanx for taking the time to read my posts and trying to help.

I just started the Armory reset. I kept the blockchain info though.

I guess there is hope since I can find this info on blockcain.info. I just cant figure this out.

If I find the address I was using to have my payment sent to using Bitcoincz and right click on it and choose View address on blockchain.info I can see on blockchain.info that that address has a balance of 0.1203203 BTC and 10 transactions.

I only have the 1 wallet which I called Jeremy's 1'st Wallet. I have several different backups of it even. So I am pretty sure I restored thed right one. I have even verified the address I had in my antminer. I have been using 3 different pools to mine over the past couple weeks. It is just that all the addys are showing 0 transactions with 0 balances.

I could possibly do a remote session using teamviewer if someone wanted to help take a look.

I am still having no Fing luck.


It is only showing 1 more address each time I open it.

And 0 balances.

Im so fucking pissed off I cant even think straight.

I found it and did it. It is now rescanning the transaction history. Will report. It had 13 addys, so I generated 100 more.

Im sorry but I cant find a way to generate more addresses. I have 12 now and none are showing the past transactions.

All the address are showing a Zero balance now. My BTCs are all gone.


I did have balances before today.

I am missing about 80 bucks worth of BTC now.

Please help:
This morning my Armory crashed. I think due to infection. I just received a gawminer Zues and found the following guide on the net. After doing what this guide in the url below, I was up n running. This morning I checked my wallet and Armory just wouldnt work. Well, I deleted armory and imported my backed up encrypted wallet and now I see all my wallet addresses but all by balances are all gone. Zero........WTF??

Am I doing something wrong? Are my BTC's gone forever?

Please help?



h++p://fuk.io/gawminers-fury-13-mhs-asic-scrypt-review-setup-guide-and-unboxing/

Last night I was attempting to set up a gawminer zues. I installed bfgminer and was hashing overnight. Well, This morning I opened my Armory Bitcoin Wallet and it crashed. Today I found some infection on my system and cleaned it up. I deleted armory and got it installed again. Had to reload the blockchain. Anyhow, I went and restored my wallet which was encrypted. Now that it is restored, I have no funds. How do I get my funds back? Are they gone forever? My wallet addresses are all there in armory but there are 0 balances now. I had .088 + BTC and now I have none. WTF???

Please help.

This is the guide I was following which caused all my problems:

http://fuk.io/gawminers-fury-13-mhs-asic-scrypt-review-setup-guide-and-unboxing/

I think I figured it out. I looked in the Miners Tab on West Hash and found my Bitcoin Addy for my wallet and it is showing my combined hash rate. So I guess I just sit back and watch.

Hello,

Today I read om these forums that I should give westhash a try.

I registered an account but am confused.

Pool 1:
stratum+tcp://stratum.westhash.com:3334

Pool 1 worker:

I entered the address of my Armory Bitcoin Wallet hosted on my PC.

Password:

I entered an "x"

Is this correct??

Is this all I need to enter? Is this incorrect?  My miners are mining/hashing away.

How do I know that westhash is giving me credit? How do I verify it is working?

Sorry if these are silly questions. I just dont want to be wasting my time and hash power.

I have this PSU and it has 8 PCIe connectors not 6. There are 4 leads that come out of the PSU that each have 1 PCIe and there are 2 leads that each have 2 PCIe connectors so that equals 8. The leads are pretty thick guage as compared to cheaper PSUs leads. I have my Antminer S3 Overclocked and the leads arent hot to the touch. I am using the leads that have a single PCIe to power the S3 but I did try the 2 leads that had 2 PCIe connectors and the miner still ran fine and the leads still werent that warm. I just figured that using the leads with 1 connector was the best bet for now though since I was Over clocking. This PSU is also barely warm when running. So far I love this PSU. I just wish the leads were a bit longer.

I will be running an S3(OCed to 375), An S3+(OCed when it arrives) and an OCed S1. I may try running a gridseed 80G Blade as well. Hoping this PSU will hold out.

I am having an issue. It seems when I am overclocked I am having an issue where my average GHS is reading a low number. What is the problem? Is it an issue with the pool I am using(Slushs) or is an issue with my OC?

If I reboot my miner the issue will be fixed for a while. I just dont understand what the problem is.