Latest posts of: thecil

Show Posts
Pages: « 1 2 [3]

on: April 29, 2017, 05:52:16 AM

is there still a pool to mine BTCD? would love to know

on: April 28, 2017, 05:45:19 AM

dead project here?

on: April 27, 2017, 02:37:05 AM

so i see NAV has been sold at 0.005 in novaexchange, i assume thats new nav potential price, am i right?

on: April 24, 2017, 04:11:46 PM

hello, where can i mine this coin? pool on the ANN is closed, i would like to start mining and holding this proyect

on: April 23, 2017, 11:05:28 PM

so, devs are not telling anything, at least "hello, we are working...", would be cool try to build a community for zyd

on: April 16, 2017, 03:00:33 PM

hello guys, newbie question here, i see windows wallet is not connecting to nodes, i try the addnode command on console but maybe is not there to put that command, so question is: how do i add the BioBar.conf file or where is it(cant find it on AppData)? thanks for the help.

on: March 31, 2017, 08:21:35 PM

can i use wallet V.0.0.5 since V.0.0.7 is getting a lot of troubles?

on: November 25, 2016, 07:40:13 PM

mining pool?

on: November 08, 2016, 05:35:13 PM

Quote No problem. Hopefully you find a sweet spot on the freq and it stays good. working fine at 0700 with 200freq, so i will leave it there for a while.

on: November 08, 2016, 05:26:59 PM

Quote from: gt_addict on November 08, 2016, 05:22:31 PM Quote from: thecil on November 08, 2016, 05:12:53 PM Quote from: gt_addict on November 08, 2016, 05:07:49 PM Lower the freq it mines at and see if it comes back. These are old machines now so more than likely that chip wont come back but its worth lowering the mining freq just to try it out. chip is on "o" every time i reboot the machine, let me try lower the freq to see if that work, thanks for fast reply. It will show the "o" to start with usually but then after a little while it will drop out to an "x". Lowering the freq will draw less voltage so it might last longer before dropping out or stay good permenantly. One chip wont affect the overall hashrate though so don't panic Chip fails again, well..i will follow your advice, and stay cool with that, really thanks for fast reply bro!

on: November 08, 2016, 05:12:53 PM

Quote from: gt_addict on November 08, 2016, 05:07:49 PM Lower the freq it mines at and see if it comes back. These are old machines now so more than likely that chip wont come back but its worth lowering the mining freq just to try it out. chip is on "o" every time i reboot the machine, let me try lower the freq to see if that work, thanks for fast reply.

on: November 08, 2016, 04:53:54 PM

Hello guys, im having this little issue since yesterday with my s4, Im getting only 1 "X" in my asic status in chain #2. Things i already try to do: 1. Upgrade Firmware, Factory Reset. 2. Turn it off all night (completed unpluged). 3. Clean hash boards to remove dust. 4. Switch Pools. Extra info to analize the issue: 1. Connected directly to wall trough 16A cable. 2. Wall connector is 110V, inside wall cable is for 12V. 3. Electrical Braker is a 40A. 4. Average Machine Temp: 51-65. 5. average Room Temp: 58-66. 6. Antminer Freq: 200(Default). 7. Antminer Voltage: 0725. 8. Original PSU 1400W. 9. Miner hashpower avg 1.989Ghs. IMG link Miner Status: NOTE: here im my country, voltage may vary from 100V to 110V, at specific hours per day, so i have been thinking: could be this voltage variation the problem? in that case, wich can be the best Freq and Voltage to set in the miner for safety mining?. If i have to buy some accessories let me know wich ones, to make more safe the voltage control (img if possible pls), also donations to this cause are welcome BTC: 1PgSfBQY7TE5eQVmsQgT4Ck35ihhoNWuxm Sorry my bad english guys .

Pages: « 1 2 [3]