Hello guys, im having this little issue since yesterday with my s4, Im getting only 1 "X" in my asic status in chain #2.
Things i already try to do:
1. Upgrade Firmware, Factory Reset.
2. Turn it off all night (completed unpluged).
3. Clean hash boards to remove dust.
4. Switch Pools.
Extra info to analize the issue:
1. Connected directly to wall trough 16A cable.
2. Wall connector is 110V, inside wall cable is for 12V.
3. Electrical Braker is a 40A.
4. Average Machine Temp: 51-65.
5. average Room Temp: 58-66.
6. Antminer Freq: 200(Default).
7. Antminer Voltage: 0725.
8. Original PSU 1400W.
9. Miner hashpower avg 1.989Ghs.
IMG link Miner Status:
https://drive.google.com/file/d/0B4GcNtODRIuBbC1SbnBLcnpBZVk/view?usp=sharingNOTE: here im my country, voltage may vary from 100V to 110V, at specific hours per day, so i have been thinking: could be this voltage variation the problem? in that case, wich can be the best Freq and Voltage to set in the miner for safety mining?.
If i have to buy some accessories let me know wich ones, to make more safe the voltage control (img if possible pls), also donations to this cause are welcome
BTC: 1PgSfBQY7TE5eQVmsQgT4Ck35ihhoNWuxm
Sorry my bad english guys
.