But pool stats uptime is frozen to 2100....

+1 

Hey,
Can you pm me where you renting THs from? I am curious which of rent services do work Ok with CK
I might give a try
 

10X Doc!

realy?
Why shall it be replaced
Doc?
I have a side question also. It might be answered already but I missed it.
When I login in shifts I see

Completed   Duration   Difficulty   Pay/Hour at 1 TH/s   Total Thps   Your Ghps   Your work


2015-01-04 18:47   2h 46m   40,640,955,016   0.00000000   1,754.2   2,765.0   6,425,600
Why some times there are zeros at at 1 TH/s?

Thanks doc
Ps I am mining non stop here

-100000
I can feel your pain bickLEDsky. You are not the most important person here. What about your spams everywhere? In self moderated topics of course so no one can argue and express his opinion about your shit? And everything which not suits you is deleted immediately. Any way back on topic
Any way enjoy dogie's work. Apart of all he is doing something not just spreading BULSHIT like you. And accourding to hardware forum topic it shall be about how to generate bitcoins. So please stay on topic in hardware thread.Dogie's posts are on topic. Learn and folow
Dogie,
 WASP ARE NOT MAKING HARDWARE THEY ARE MAKING LEDS VERY HARD AND HIGH END WORK. HARDWARE IS FOR for newbies  
To hardware vendors
I beg you please send a free Christmas tree with shiny LEDs to bickLEDsky so we can compare his reviews and dogie's and have second hardware opinion from a reputable forum expert
Blink blink.....

Excellent results?
Is it a solo pool? If yes how many blocks have you found speaking of excellent results?

Thanks
Ps or you mean that pool is stable, no minig interruptions and so on by excellent results?

Btcguild avoid Chinese pools as much as possible. It is not about  which is more profitable it is about trust in a first place. The higher number of blocks DOES NOT LEAD TO HIGHER PAYOUTS ALONE.
I will say it like this. I prefer to earn less and donate the difference to the trustable pool op instead to mine in China land
Please note the above does not mean that discus fish is more profitable or vice versa
You can not beat luck. No mater how you change the pools in long term it is same. If you feel adventurous try solo all or nothing Otherwise find primary and backup pools based on trust and stay there

OpenID

As pointed many times it does not matter. Just do not pay attention tou your stats. You need to submit just one share to solve a block. You are not get paid for number of shares. You get paid just for the one which solves a block. And you get all....You need to find one first

....
What is the problem?..??
It is plug and play with tplink.....
Any way pm me so we can solve this out

So mistery is revealed  

Thermaltake 600W has 2 x 12V rails right?
Are two miners working with Thermaltake 600W?
No?
Then most probably you are connecting both miners to 1 rail which is capable of UP 20A. Make absolutely sure that you are coneting two miners to two separate 12V rails
If you can measure the 12V rail voltage while miners are not working it would be great. You will know if it is a PSU or something else

It is low cost psu so 400W is just a spec......

Hey,
1. What is written on 500W ATX envelope 12v how many amps?
2. Is this psu single or multi rail. You are overloading it for sure
Probably PSU  over-current protection kiks in or there is too big voltage drop in 12V output which dice is not able to handle
My advise for you is:

do not try anymore with this psu to power two Dice miners. You got lucky so far and there is no magic smoke yet   But if you continue to try the PSU will BLOW.

Send us picture of your psu stamp it says 12V Amps single or multy rail and so on

But once again do not push it anymore leave just one miner to mine

You can try to decrease chip voltage at the end. Not a good idea try with 680,670 and so on with just one miner at the beginning. Watch HW errors in cgminer. When they start to increase or if board does not want to start mining go one step backward. Doing this you will downclock the miner and decrease consumption - but HW errors will increase also. But as i said not good idea. If the PSU is 400W at 12V in reality you should not experience such problems

depends from the clock
I do not know unfortunately but both clock and voltage are involved ....
2Good knows it probably. check if there is a review of dice from him

with v0.10.0rc1 works charming

Nice chicks dude just below your screen shot  
Is marto giving one for free with the DICE just for warmup
Now seriously
You are setiing setting asic dificulty. Rocker chip needs it. Spondo tech guys call it leading zeros....When you are not using tplink and not minig solo or want accurate pool stats you need to add suggest-diff to cgminer see my post above. How to calculate this - pow ( 2, asic diff -1)
If you set asic diff to 5 for example dice will return only results > 16. Higher dificulty will make USB communication less stressed preferable especially when you have many devices via usb hub. It will safe a lot of CPU cycles also
If your pool does not know about it you may loose hash rate when diff is 10 - pow (2,9) 512 for instance. Once agin it does not hurt solo at all it just will screw up your POOL stats. In solo at current btc diff cgminer will always send winning share
With other pools just make sure to set up your worker min diff to match the calc. And remember not all pols do suport suggest-diff just watch it
And finally you can always trust cgminer stats they are on spot 100 % guaranteed

Super.
For all of you who want 160gh from dice

Increase the voltage to 700 and clock to 850. But try jently with clock start in steps 700 750 800
Do not push it to much

Wait for marto to publish the patch it will not work like this.
Or use tplink if you can...

So no problems dude

Resume for other folks

1. tbdice.org was not resolving  - some dns issues the workaround is to use static dns to your pc and tplink
my favourites are 8.8.8.8. and 8.8.4.4 google always works

2. Do not forget to fix miner.sh as posted above
3. enjoy

And exersize with putty Without it all of us are lost