Ooh gourmet chocolate. Set aside a set for me if they are still available. 2 white, 2 milk, 1 dark. Thanks.
|
|
|
Update: I've alerted support to all ticket numbers posted or sent by DM since my last post. It may still take some time to get a response however.
Thanks Dargo for the extra support here moving things along. The use of the system is very clean and straightforward. However, I couldn't complete end to end testing as I had misread somewhere along the way Tier 2 allowing access to US dollars and banks. Tier 3 verification with supporting document was submitted as soon as I found the additional info and I replied to the same ticket (#301424). Hoping you can have that revisited to clear Tier 3 as well.
|
|
|
The chips are probably not getting power it needs to respond, but hard to say why from your note. Read, review, and follow the hyperlinks of the Q&A / Troubleshooting section of the OP.
|
|
|
I'm new and I apologize if I missed it in this thread, but will mixing the compaq and 2pac yield any issues? I see that you can set the clock rate for either/or/both of those devices in the OP but unsure if this is a suggested setup to run or not. Curious cause I see a few up on ebay that I might try to snatch up.
No issues. They work perfectly fine mixed together. Awesome Thanks. One more question, however aimed more to mining and Pi3...I found an old 16 GB Class 2 Micro SD card from my Original Droid phone and it would be nice to find some use for it. I was planning on using it in the Pi3 that will be used for this mining setup. I know transfer rate for installing packages/etc will be dreadfully slow, and I'm fine with that. What I'm not fine with is if it impacts mining at all. Would anyone see an issue with this Class 2 card bottle-necking mining capabilites? Bottleneck, no. I'm using a 2GB card I pulled out of and old ip cam from 2008. Worst case it can die and kernel panic the pi, but while its working, mining via cgminer does not wait on I/O.
|
|
|
I'm new and I apologize if I missed it in this thread, but will mixing the compaq and 2pac yield any issues? I see that you can set the clock rate for either/or/both of those devices in the OP but unsure if this is a suggested setup to run or not. Curious cause I see a few up on ebay that I might try to snatch up.
No issues. They work perfectly fine mixed together.
|
|
|
I like high fees and all, but kano's payment scheme is currently sub-optimal for people with 100Th or less. Too many smallish payments and consolidation is darned expensive even when attempting lower sat/byte.
Was anyone able (in the last two-three days) to do a transaction with less than 100sat/byte? Thanks
Yeah indeed, I had to pay massive amount of fees to move my BTC. I used like 121-125 and it's taking forever (more then 24 hours) Check https://bitcoinfees.21.co/ ... Mine to your Core, not to an exchange wallet. Then you don't have ANY fees to "consolidate," because you don't need to consolidate...or transfer, unless you're selling BTC or purchasing with it. I run a full node, and use only the "normal" suggested fee that shows in Core when you send...right now, around .00267/kb...and I've not had a tx take more than two hours to confirm in several months. Dunno if that's helpful. We've had EXTENSIVE discussions on that issue. EDIT: I run ~24TH. I don't see how it can possibly work to your benefit. Wouldn't a large "combined" transaction (from several inputs) have higher byte count anyway? Besides...if you are sending 0.00267/kb, it IS a a very high fee tx in my book. 24Th will get you only 0.0057-0.0059 btc per payout from kano, but you are paying 0.000496 in fees (per 176 kano's bytes). Essentially, you are paying 8.4-8.7% of your earnings in fees, unless my math is wrong somehow. Re that this topis was discussed here. Yes it was, but nothing changed, despite the fact that something was in the works months ago. Combining at least daily outputs makes sense to me, especially now that we have 3 or even more blocks a day. I routed my payments over to a MRR address a little earlier this year for some misc experiments. I haven't audited it because my kano payments are getting close to dust recently so I don't actually know (or stress about) if I've lose some or half of them. Anyways, I was surprised it's one fee to send to my bitcoind wallet from there, must have been a few hundred tiny ones at least directed that way to form a single logical output. Much like coinbase? (I don't have one of those.) Not officially recommending it but something interesting to look at. I trust it going directly to my wallet at any time over the risk in that convenience workaround. (edit) regarding best fees, use: https://jochen-hoenicke.de/queue/#2wclick on the range [120-140] on the left legend to drop the bottom half of the chart and get a better view.
|
|
|
@n_p, what OS and version is that you are building in?
|
|
|
Nice Dude, Now i can change under Win 10 the MHZ thank you so much, that Shit works ... Glad you got a workable setup. Tried out ck's windows build/zip and the write config locks up the same for me. I'm comfortable thinking for the time being it's not something I added. I'll circle back to take a closer look at it another time.
|
|
|
Hi Dargo, hoping you can nudge my Tier1/2 verification process along as well (Ticket #301424).
|
|
|
if i try to save a Config. the Miner crah´s and i have in the folder a config file but it´s emtpy, if i wirte in this anythin and start, the Miner ask me after Server...
I'll look that this in a moment or two. I shouldn't have touched anything there. Might never have been tested in windows from the upstream code. Can you tell me how i can add this line "cgminer will accept one or both parameters for the stick. --gekko-compac-freq 200 --gekko-2pac-freq 150" so that i can change my Mhz?
Where i can change it?
You would just add that at startup like so: cgminer.exe -o stratum+tcp://solo.ckpool.org:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x --suggest-diff 32 --gekko-2pac-freq 150
|
|
|
Thanks. I meant difficulty. I wish it's luck because it's getting big and big The Kanopool dashboard shows
Shares: 1,079,508,120,218 (181.15%)
I wonder whether 181.15% is luck? Thanks.
That is Diff%...The lower the better. The expected average is 100%...less than 100% comes in as green on the Block Statistics page and above 100% comes in as red. Don't micro manage.. look at 50 block or 100 block sections looking by block to block will drive you nuts. I still like visiting the homepage here for a sanity check: https://ckpoolmonitor.zachmonroe.com/Calculators will give you 0.00042196 for 1THs at the moment (100%). There are 3/5/7 days below that. Look out at 30 to stay sane.
|
|
|
I've changed my rating. A PM has been sent to Zepher if you really want to get nitty-gritty about getting me involved. I do apologize for leaving a positive feedback after only one deal, however it's a habit of not only mine but many. Nothing stops a green trust member from scamming, and that goes for everybody. Unfortunately it's not the giver of the green trust's fault. RichG seemed like a legitimate seller for others up until now, not only me.
Sorry to all who got scammed, I'm surprised he chose only some of us to scam. A reminder to use escrow in all situations involving big amounts.
Quoting this for longevity.
|
|
|
I think he is a multi @nachius should post proofs of transactions, if he has nothing to do with the scammers account I'll agree with that. Or this is looking like a case of farming trust between your own accounts to give the appearance of being legit. I'll shoot him a PM and ask him to come provide some proof of the trade/s. Because if the account belongs to RichG, someone else is going to end up hurt. Edit: PM sent. If I'm wrong, I'll happily retract my post above. Zepher, thank you for looking into this. I have my reservations on any DT holder who haphazardly empowers potential scammers, while throwing out a everyone does it defense. Such power should be in their hands. Whatever conclusion you end up at after reviewing his PMs will be respected.
|
|
|
In addition to RichG which restarted activity second week of May, he green tagged a few other newbies that started up accounts/activities at nearly the same time. It's a deadly use of trust.
|
|
|
It would work better if the transaction id is the full 64 bytes instead of 62 as posted.
|
|
|
Waiting here for paypal issue to clear as well. May be cool stop further one way tx until resolved.
|
|
|
Try connecting the Pi3b to a different power source of at least 2.1A.
|
|
|
Trade well executed. Thank you for the smooth and prompt transaction.
|
|
|
vh, it's been a while since I sent you a tip so I just popped off a little BTC goodness your way thank you.
|
|
|
|