This is getting very frustrating I have tried everything and nothing I got it connect once to the configuration page but have not been able to do so sense I was able to ping it before now I can't but it will not connect to configuration page again and just keeps resetting after 2 minutes

I think the problem is in my network somewhere. Let's start from the beginning I changed my ip address from a 192.168.0.x  to a 192.168.1.x ip
I got the blade to connect once seen the configuration page and everything well I changed the ip address to 192.168.1.24 yea I know I should have set it to 192.168.0.24 well I kind of rushed it a little anyways I hit update servers and such changed my Ip back to automatically find an Ip. Well after this no matter what I do go back and change my Ip to a 192.168.1. ip I cannot connect to the blade all I get is an internet explorer cannot open the search page. I have reset my router reset my blade nothing and I mean nothing will get me back to that configuration page. I pressed the reset button on my router and touched the 2 pins on the blade next to the Ethernet port and still same thing cannot connect to search page. This is very frustrating I have had this blade for about 2 weeks and cannot get it to connect to the configuration page again. All help would be appreciated.

Well I got the configuration page once but I have not been able to get it sense?

I am running my blade with an Ethernet cable with my ISPs which is DSL router. I got it connected read my post above just won't connect again.

Gives me a no connection error when I change my ip to a 192.168.1.x ip sends me to bing on obtain an ip automatically.

I have posted on different threads with little help one person was helping me but now he isn't replying to my posts. This is the situation I had changed my ip to 192.168.1.10 and got the blade connected last night but I accidently changed the blade to 192.168.1.24 then I set my Ip address to obtain an Ip automatically I have a 192.168.0.x Ipv4 address from my router I also tried changing my Ip on my router to 192.168.1.x nothing why was I able to connect to it last night once using the same methods then I was never able to connect to it again? if you want pictures of my set up just ask and I will post them but may not be necessary as the description of the problem is stated. I have tried connected to the one I changed it to I also clicked on update server in the options page of the blade. I have also reset the blade a few times still same problem.

I will post here sense this thread is getting replies constantly let me say everything that has happened so I can get some help. Last night after I got my blade working after changing my IPv4 to 192.168.1.10 I was able to connect to the blade using 192.168.1.254:8000  I changed my blade to 192.168.1.24 Because I didn't notice the step to change it to a 192.168.0.x ip address well I set my Ip settings back to obtain an ip address manually. Then I wasn't able to reconnect to the blade I even changed my routers IP address to a 192.168.1.xx ip address still cannot connect to the blade this is very frustrating I have tried everything even resetting the blade and I cannot connect to it again no matter what I do.

Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.

C:\windows\System32>ping 192.168.1.254

Pinging 192.168.1.254 with 32 bytes of data:
Reply from 192.168.1.254: bytes=32 time=8ms TTL=100
Reply from 192.168.1.254: bytes=32 time=3ms TTL=100
Reply from 192.168.1.254: bytes=32 time=5ms TTL=100
Reply from 192.168.1.254: bytes=32 time=5ms TTL=100

Ping statistics for 192.168.1.254:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3ms, Maximum = 8ms, Average = 5ms

C:\windows\System32> That is what returned from a ping on the blade.

Yes I am going to do that it finds it on my router but it shows 10m instead of 100m don't understand why that could be when I connected to it before.

yes I have I even changed all my Ip info from having 192.168.0.x to having 192.168.1.x still nothing I connected to it for the first time last night but when I changed the IP accidently to a 192.168.1.24 I couldn't connect again once I changed my Ip on my pc to obtain an IP address automatically this was before I changed my router info. Then I changed my router info same situation.

I even changed my router to have a 192.168.1.x Ip. takes me to bing everytime.

yup!

Ok so I had it up when I ran 192.168.1.254:8000 Then I accidently changed the Ip on the blade configuration page to 192.168.1.24 then I set my internet connection back to automatically get Ip address. I reset the blade tried doing the steps over again but nothing won't even bring up the blades configuration page but what happens when I enter my own ip address it still doesn't work when I change Ip4 Ip to 192.168.1.10 like before it still doesn't come up gives me a network error. I was able to bring it up before I just don't understand why it won't work anymore.

Ok I had it connected but forgot to put 0 instead of a 1 now I cannot connect I reset the blade and everything and it wont connect again at all. I even re did the steps of changing my ip same thing won't connect.

Yes Tonight when I get off work I ran the Ethernet cord out to the location tested it and it works blade works just have to do those steps the hardest part for me was getting my blade to power up.

Well the cheap PSU I bought from staples was garbage so was the WiFi Extender so instead I am going to return them and instead run some Cat5 Cable out to it's location cause I got it working on a PSU from a broken computer no problem. Then I have to change my Ip on my pc to match the same range as the blade after I get to that point.

Ok I will let you know how it goes tomorrow.

my ip is an ip4 and it is 192.168.0.x now I need to go and figure out how to manually change my ip.

Ok I got it connected using the other PC but when I put 192.168.1.254:8000/main into my browser it takes me to a page cannot be displayed.

I have the same computer outside it is my mothers her MOBO failed so I am going to try and use that power supply but I have to jump that as well sense the MOBO is shot. let me go give it a try and I will let you know how that goes.