Download nmap (nmap.org/dist/nmap-6.40-setup.exe) and do a ping scan on 192.168.1.* to see if the RPi is even on the address you are trying to ssh into (192.168.1.249). Either that or check in your router to see exactly what IP it assigned to it. It may not be the static IP you mentioned. Mine auto assigned a different IP to the RPi.
says there is an unknown OS on the ip 192.168.1.249, and my gateway is 192.168.1.1 the RPi seems to refuse SSH connection, rather than simply not being found Did you try to use IE with 192.168.1.249 chrome and IE both fail to connect to it (but fail faster [1-2sec] than if i entered some unused ip that takes 5-10 seconds to fail the ping attempt) Did you check anything used same ip address in you router. ps: happened to me my playbook also used 192.168.1.249 changed the cmdline.txt file to be ip=192.168.1.240 and tried again. same result. Chrome quickly finds the device at that ip address, but returns "Oops! Google Chrome could not connect to 192.168.1.240". SSH attempts are faced with "connection refused" what am i doing wrong? Ive wasted hours of downtime, driven myself insane, and am going to bed knowing that I won't be able to do anything until tomorrow evening at the earliest (24hrs from first plugging in my unit!) Does Punin have a different SD image i can try, maybe buzzdave's upload is no good? Why didnt you change ip in /etc/network/interfaces? |
|
|
|
Download nmap (nmap.org/dist/nmap-6.40-setup.exe) and do a ping scan on 192.168.1.* to see if the RPi is even on the address you are trying to ssh into (192.168.1.249). Either that or check in your router to see exactly what IP it assigned to it. It may not be the static IP you mentioned. Mine auto assigned a different IP to the RPi.
says there is an unknown OS on the ip 192.168.1.249, and my gateway is 192.168.1.1 the RPi seems to refuse SSH connection, rather than simply not being found Did you try to use IE with 192.168.1.249 chrome and IE both fail to connect to it (but fail faster [1-2sec] than if i entered some unused ip that takes 5-10 seconds to fail the ping attempt) Did you check anything used same ip address in you router. ps: happened to me my playbook also used 192.168.1.249 |
|
|
|
Download nmap (nmap.org/dist/nmap-6.40-setup.exe) and do a ping scan on 192.168.1.* to see if the RPi is even on the address you are trying to ssh into (192.168.1.249). Either that or check in your router to see exactly what IP it assigned to it. It may not be the static IP you mentioned. Mine auto assigned a different IP to the RPi.
says there is an unknown OS on the ip 192.168.1.249, and my gateway is 192.168.1.1 the RPi seems to refuse SSH connection, rather than simply not being found Did you try to use IE with 192.168.1.249 |
|
|
|
okay im stuck already. having to load my own sd card is a massive PITA.
i cant ssh to the default ip. says connection refused when using putty. can someone help list the steps to get me off hte ground, because neither the EU or US manuals seem to address this
do you have a monitor you can hook up to it to make sure the IP you are using and gateway are correct? hook up a keyboard also, and when it loads type ifconfig to check the IP and gateway This ^^^ I had to reset the IP address of the Rpi as it was also 10.10.etc. Once I set a static IP then I could SSH in with putty and did not require a monitor. Also, it may take 1-2 'sudo reboot' for it to stick. no hdmi monitor and no usb keyboard on hand guys  also, is it normal for the several GB .img file to make the SD card suddenly appear 33/55MB full? is that an effect of the imaging or an error? You need 2GB or more spaces on SD card. I have 8gb with the basic image, SSH to 192.168.1.249 simply times out. by adding the ip=192.168.1.249 command to the cmdline.txt file (i put it as the second-last modifier), i get "connection refused". What am i doing wrong here? I can't beleive I am wasting so much time to find/format/install my own Sd card (actually an 8gb microsd with an adapter) you get image with gateway fukup I think 192.168.2.1. |
|
|
|
okay im stuck already. having to load my own sd card is a massive PITA.
i cant ssh to the default ip. says connection refused when using putty. can someone help list the steps to get me off hte ground, because neither the EU or US manuals seem to address this
do you have a monitor you can hook up to it to make sure the IP you are using and gateway are correct? hook up a keyboard also, and when it loads type ifconfig to check the IP and gateway This ^^^ I had to reset the IP address of the Rpi as it was also 10.10.etc. Once I set a static IP then I could SSH in with putty and did not require a monitor. Also, it may take 1-2 'sudo reboot' for it to stick. no hdmi monitor and no usb keyboard on hand guys also, is it normal for the several GB .img file to make the SD card suddenly appear 33/55MB full? is that an effect of the imaging or an error? You need 2GB or more spaces on SD card. |
|
|
|
okay im stuck already. having to load my own sd card is a massive PITA.
i cant ssh to the default ip. says connection refused when using putty. can someone help list the steps to get me off hte ground, because neither the EU or US manuals seem to address this
Can you listing your /etc/network/interfaces text. |
|
|
|
Sorry if this has been answered already but what would the expected delivery dates be if I ordered a Starter kit and a couple of h-boards today?
You will get it for Oct Delivery. ps: miner will start ship out at end of Oct. |
|
|
|
Looks like my Fedex to canada will deliver today! It seemingly cleared customs already and is predicted for a 12pm dropoff! (why oh why must i work today!?)
this is very fast shipping, much appreciated!
How is brokerage + customs fee? ill find out soon, i wasnt home at time of delivery (noon EST) Happened to me too and you will have to go to pick up it. |
|
|
|
Looks like the team managed to get all 36 outstanding August starters in boxes and out the door! Go team!
We will be sending emails out over the next day or so in order to get your BTC payment addresses.
Cheers,
Dave
Fantastic Dave. Kudos to you and MBP team. Appreciate it.! How do we get the tracking numbers.? I checked the site and it doesnot have it. Thanks, You will get it by email when your miner shipped. |
|
|
|
woot! order just shipped!
Grats |
|
|
|
I bought AX860 psu and working good. |
|
|
|
You can try to get 80plus gold or high for 500W+ psu. |
|
|
|
...
Thanks!
Although every 10min?
I am only experiencing this issue with Slush's pool, all others been running fairly stable.
Yes, I'm on Slush's. I thought that it is a local proxy problem and that it would be the same with other pools. It seems now that the problem may be on the Slush's end. I had to reset BF miner for my hashrate dive down low and first time I had to do it. |
|
|
|
|
Thank lajz99 and your tip on way to your LTC wall.
|
|
|
|
|
I sent Email this morning and I got refund from Paypal.
Thank Lajz99 and tip is coming.
|
|
|
|
Wow cool - did you change R01F or just add the heatsinks? If you changed R01F what value did you use? R01F change to 3k3R |
|
|
|
|
you can sell your Mboard for price of Hboard and someone out there willing to buy it for good price but dont ask for 800usd.
|
|
|
|
You can 'overclock' them with the pencil mod but you cannot do it on a full rig if I am not mistaken.
You can do full rig but you need some thing to cool down boards or put heatsink on each board. |
|
|
|
|
Show Posts
