 Show Posts
|
|
Pages: « 1 2 3 [4] 5 6 »
|
Hi Acrefawn,
Thanks for your excellent work here.
I am finding that I am experiencing a couple of issues with this using DSTM's miner 0.5.6 with Autorun ver 1.8.1.
Issue 1:
When the server changes difficulty on several GPU's at once, there is sometimes a significant, temporary hashrate drop which autorun incorrectly identifies as a real problem and restarts the miner.
Issue 2:
I regularly receive the "Loaded too many GPUs" report on only one of my rigs.
This is a 7 card rig but for some reason Autorun is detecting 14/7 cards despite the problem not actually existing in the miner.
I suspect that this is related to an erroneous log output from the miner as follows; note that the miner has reported two iterations of each card before outputting the "average" line (the last line of the extract below)
2017-12-07 9:39:51 AM| ========== Sol/s: 2898.4 Sol/W: 3.89 Avg: 2874.0 I/s: 1565.8 Sh: 39.13 1.00 357
2017-12-07 9:39:51 AM|# GPU4 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:53 AM|# GPU5 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:55 AM|# GPU6 server set difficulty to: 000f0f0f0f0f0f0f0f0f0f0f...
2017-12-07 9:39:58 AM| GPU0 63C Sol/s: 291.4 Sol/W: 3.94 Avg: 432.1 I/s: 158.8 Sh: 4.97 1.00 349
2017-12-07 9:39:59 AM| GPU1 67C Sol/s: 279.9 Sol/W: 3.80 Avg: 419.6 I/s: 149.5 Sh: 5.31 1.00 352 ++
2017-12-07 9:40:01 AM| GPU2 54C Sol/s: 295.4 Sol/W: 3.99 Avg: 424.5 I/s: 154.2 Sh: 3.82 1.00 344
2017-12-07 9:40:03 AM| GPU3 66C Sol/s: 284.6 Sol/W: 3.74 Avg: 421.5 I/s: 152.0 Sh: 6.15 1.00 375 +
2017-12-07 9:40:05 AM| GPU4 70C Sol/s: 298.7 Sol/W: 3.83 Avg: 435.5 I/s: 159.8 Sh: 6.31 1.00 416
2017-12-07 9:40:05 AM|> GPU0 62C Sol/s: 229.0 Sol/W: 2.06 Avg: 229.0 I/s: 121.5 Sh: 5.99 1.00 343 ++
2017-12-07 9:40:06 AM|> GPU1 67C Sol/s: 225.1 Sol/W: 2.02 Avg: 225.1 I/s: 120.1 Sh: 2.96 1.00 344 +
2017-12-07 9:40:08 AM|> GPU2 54C Sol/s: 219.8 Sol/W: 2.06 Avg: 219.8 I/s: 119.7 Sh: 5.99 1.00 352 ++
2017-12-07 9:40:09 AM| GPU5 71C Sol/s: 276.1 Sol/W: 3.73 Avg: 437.3 I/s: 148.8 Sh: 7.44 1.00 344 +
2017-12-07 9:40:10 AM|> GPU3 66C Sol/s: 222.7 Sol/W: 1.95 Avg: 222.7 I/s: 119.4 Sh: 5.81 1.00 351 ++
2017-12-07 9:40:11 AM| GPU6 49C Sol/s: 162.0 Sol/W: 3.69 Avg: 248.7 I/s: 84.8 Sh: 3.79 0.96 360 +
2017-12-07 9:40:11 AM| ========== Sol/s: 1888.2 Sol/W: 3.82 Avg: 2819.2 I/s: 1008.0 Sh: 37.79 1.00 362
As a side note;
Inputting the real "average" hashrate into the config.bat file tends to cause autorun to detect too many instances of low hashrate because any reported hashrate below the average appears to be considered an error.
I'd suggest this parameter would be better if named "minimum acceptable hashrate" or similar
or
Add a configurable tolerance to the acceptable range of hashrates. ie, within (say) 10% of the average is -not- considered to be a hashrate error.
Further, (just an idea) rather than the user nominating the average hashrate, perhaps autorun could automatically detect the actual average hashrate from all log files and store it in the config.bat file.
Happy to discuss this with you if the issue isn't clear from my description. Sorry that my input is not in the form of code change suggestions, it's beyond my capability.
That said, using this script has been educational and I'm thankful that you have released it open source.
Thanks again.
Hello! Thank you very much for your reply and detailed info. I fixed some issues what you talking about in 1.8.2, please try it and report to me. About hashrate - good idea - i will think about it, thank you! But please try to use not exact value but a little bit lower. Yeh, i've set it to 1750 and working good so far.
Hello! Thank you for reply and using my script! Yes, try to use little bit lower hashrate, not exact value but with ~2%-5% difference. Thank you very much! |
|
|
|
By any chance can someone make this work for Linux (Ubuntu) running Dstm
You can use Dstm on Windows with same hashrate |
|
|
|
Today version 1.8.1 released!
Changelog - [1.8.1]- Support Palit Thunder Master.
- Error handling: 0 mb, failed to connect.
- Command /report has been added to manage the configuration of hourly notifications via Telegram.
- Error handling in the first block (when the script starts), now if the script can not be started, the script can restart the computer.
- Notification via Telegram in case of config.bat file is damaged.
- Added more messages to the log file.
- Cosmetic and minor fixes.
- Added ETH miner support (test over).
Ewbf 0.3.4 version
Claymore 12.6 version (Equihash)
Claymore 10.2 version (Dagger-Hashimoto)
Dstm 0.5.6 version
|
|
|
|
Hello,
Thank for your code.
Could you add nvidiainspector to your OC software list ?
Hello! Thx! Will add in 1.8.1 Hello
How I can reboot computer all days at same hour??, 11.20AM
i put delay to 24 hour and reboot to 11:20 but 1 day later pc is not reboot.
Thank you, very interesting your proyect
Delay 24h means 24 RUNNING hours, if your script will be restarted by error or manually from new start time +24h. Use midday/midnight restart at 12:00/00:00 Thx for reply! |
|
|
|
than you man, this is very great and useful scrypt!!
now I'm sure that my rig is working as intended and not masking for a working one))
will share the info about it, if you do not mind!
Thank you very much! |
|
|
|
Hello guys (again)! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, CLAYMORE miners or needs some extra control over your rigs please read carefully my message below. I want to introduce you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello DSTM! Thank you for your work and new versions! Keep it going! We believe in you!!! Hello guys (again)! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, CLAYMORE miners or needs some extra control over your rigs please read carefully my message below. I want to introduce to you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Hello guys (again)! Want to remind to all of you, that if somebody has any problems with stability of EWBF, DSTM, CLAYMORE miners or needs some extra control over your rigs please read carefully my message below. I want to introduce to you a script, which can solve most of your problems. It is a result of half a year hard work with my beta testers. Now it is clean of any bugs and ready to be introduced for the wide mining community. 1) https://bitcointalk.org/index.php?topic=2071108.02) https://forum.z.cash/t/cmd-equihash-miner-autorun-autorestart-watchdog-for-ewbf-claymore-dstm/20640It will definetely reduce your valuable time spent near your rigs, because this script will do all the work for you. Just start it and forget about your rigs, relax or do anything else. In case of any problem this script will restart your miner, or the rig, if necessary. It will notify you by Telegramm message about all problems and corrective actions taken. It is open source code (CMD/BAT, not an .exe or something like this), so anyone can check throug the code if needed. Enjoy your life, let the script to monitor your rigs for you. |
|
|
|
Today version 1.8.0 released!
Changelog:- Cosmetic changes.
- Ability to adjust the delay after launching the Afterburner.
- Ability to remember the last good bot to send online status.
- Added ETH supporting
Ewbf 0.3.4 version
Claymore 12.6 version
Claymore 10.2 version (ETH)
Dstm 0.5.6 version
|
|
|
|
Hi, installed you program. It works great, but I cannot get id from Telegram Bot, I sent "/start" and get nothing in response. Thanks.
Hello. Was a problems with server, sorry for that. Now all is ok. Try again please. |
|
|
|
Also my config was changed! I reliase that now. It happened today 17:30PM GMT+3. Config changed its settings to default or something. I reliased that thaks to telegram notifications. I checked telegram and bot no longer sending notifications to me. I changed config again according my settings.
You using latest script version 1.7.9? |
|
|
|
Acrefawn there was an error this morning in my rigs, after which your Autorun.bat started mining for a completely different mining address !!!
It would be criminal and ridiculous if your updates somehow cause the miner to default to another address !!!! you have to act more professional man, or at least make it very clear in instructions to prevent this.
The Miner should never default to another Zcash address, that is insane, for all users out there, be very careful against cheap tricks like this.
I'm waiting for an explanation from you as to how your autorun.bat can default to another zcash address man...
FINAL NOTE: I think everyone using this program should also modify the original autorun.bat file and make sure that all the addresses there are changed to their own ZCASH address, otherwise in the case of any unexpected errors, the system very likely defaults to the miner address specified by Acrefawn, this looks to be the most likely explanation, but I'm open to being corrected...
I want to notify you that the script is open source, you have the right to make any changes you want. To run the script correctly, you need: Windows Pro x64; full permission to create, move, rename and delete files in the folder of the miner; placing the script files in a folder that (path name) does not contain special characters and spaces; disabled UAC; use the latest version of the script. In very rare cases it happens that the config.bat file is damaged by the system and the script recreates it with standard settings. In this case and in any other case, Telegram bot notify you. I strongly recommend using Telegram. Also, I strongly recommend that you use different pools or different servers of the same pool as additional servers. Because if all the servers that you have contributed will be unavailable - the script will switch (only for a 30 minutes, and then will return) to the address to support the project. Agree, the lack of connection with 5 pools is very rare. Do not prescribe one pool, it is important to remember. Given this information, we can draw the following conclusion. Even if there were no such options, then in case of an error - the miner would shut off and not work at all until you control this issue yourself. So in any case, the process of mining to your address would not continue. I want to inform you that personally I have nothing to do with this behavior of the script, I remind you that the script is publicly available and everyone can check the source code before installing it. You can use or not use the script, it's your choice and desire. I just posted my work in free access, and my settings in the script code are spelled out as an example. The script helps automate the mining process, eliminate most of the errors, solve a number of problems, without your participation in it. But this does not mean that the script solves all errors and problems completely. Human control is needed in any case. With the help of the script, you have a unique opportunity to save more money than without it, even considering such situations. Somehow count how many times the script rebooted your miner or computer while you were sleeping or were busy with your own affairs and kept the stability of your income. In a specific situation, I once again ask for your forgiveness for what happened. I ask you to be attentive. For greater security, you can change the addresses inside the script to your own, it's not forbidden. You can always write to me on Telegram and I will help you with advice, I'm online practically 24/7. |
|
|
|
Today version 1.7.9 released!
Changelog:- Added the ability to specify any interval to reboot the computer and the miner, Not only once in 1 hour or every 2 hours.
- Fixed error of the configuration file corruption.
- The system of online reports has been improved, the delay has been increased.
- Increased the delay between the iterations of the script to reduce the load on the processor.
- Minor changes and improvements.
Ewbf 0.3.4 version
Claymore 12.6 version
Dstm 0.5.5 version
|
|
|
|
Hi I just tried this on the DSTM 0.5.5, and after setting up everything in the config.bat and running autorun, it says miner.exe is missing, which never was in the DSTM directory to begin with ? where do we get this, also instructions say to double check fminer.bat, but this file also doesn't exist in the DSTM miner folder ?..
Thanks
ok the script finally is working as intended but the autorun.bat and the MSI afterburner it restarts on every run cause UAC prompts on windows 10 which sometimes freeze the GPU. It's such an unnecessary prompt, maybe it's a simple q, but is there a way to whitelist only these 2 programs so UAC prompts work fine, but only make exceptions for MSI Afterburner and this watchdog program ?
Thanks
1) You downloaded script for EWBF and use it with DSTM, redownload script for DSTM and all will be fine. 2) I'm sorry but it is impossible, need to disable UAC  So I got the script working last night and found one thing:
1. if you edit the config.bat file and change this: t1S8HRoMoyhBhwXq6zY5vHwqhd9MHSiHWKv.fr178
into something shorter on Server5BatCommand line (like Suprnova Username.rig) the autorun.bat will flag the config.bat as corrupt if it's shorter:
C123456789.c1234567 <-- autorun.bat says the config.bat is corrupted, but only for the Server5BatCommand line.
Must be corrected in 1.7.9. Thank you for report. |
|
|
|
Thanks for considering.
I tried the new version and this time cpu is spiking again but timings changed. This time cpu is spiking along 2 seconds in every 20 seconds. And cpu usage about 35% when it spikes.
Normally, CPU usage is about 3-4%.
Edit: I checked 9 hours later, and spiking times increased. CPU is spiking along 12 seconds in every 20 seconds now. Also CPU usage increased to 80%.
Maybe I got a problem with my CPU?
My cpu: Intel Pentium G4400
I think this is happening because of windows. CPU is using random application or service. When I close the application, it is starting to use another application or service.
You just have very weak CPU for this tasks and this is a reason. Pentium it is very weak... Try to disable all from your OS, themes, fonts, less services. I will try to reduce this spikes but i cant fix them at all. My script have 900+ lines of code and it is really heavy with a lot of functionality to check your mining process. |
|
|
|
I have a problem with this script guys. Its causing cpu spikes and using cpu about 80%.
My cpu spiking along 4-5 seconds in every 8 seconds.
Replace timeout.exe /T 1 /nobreak >NUL to timeout.exe /T 5 /nobreak >NUL And report to me the result. -----(edited) Script updated. This data is changed now by me. Redownload and try pls. |
|
|
|
Today version 1.7.8 released!Changelog:- False online reports have been completely corrected.
- Added ignoring of the lines of DevFee.
- Fixed support for more than 8 video cards in reports via Telegram.
- Added the name of the server pool to the reports, to the command /info, to the main screen of the command line window.
- At the termination of the additional program process, the restart of the miner is no longer required.
- Waiting timer 2 min. only after the first start of MSIA.
- Added commands: /cooldown, /shutdown, /teamviewer.
- Fixed restart timers variables, there was my error ...
- A white window with an error about the incorrect operation of the application will now be closed and will not cause the hang of the miner.
- Cosmetic and minor fixes.
Ewbf 0.3.4 version
Claymore 12.6 version
Dstm 0.5.5 version
|
|
|
|
Hi guys I have some questions about an error and some codes.  First question is, I'm using this script and sometimes script restarting miner because of ''last share timeout'' is reaching 10/10. I guess this is happening because of miner doesn't sharing works along 10 minutes. Sometimes, this is happening 3-4 times a day. Why I'm getting this error? Second question about these codes. They are inside config.bat but not active. What does these codes do? setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 Hello! Correct, if your miner not recieve (or send) shares more than 10 minutes - miner will be restarted, this is mostly problem of pool or your internet connection (high ping). check it all pls, or try to switch pool. About this code, this is mostly needed if you use AMD cards (as you know Claymore is supported too), on Nvidia cards you can use this too, but for me this options not increase values. By default this code is off, and this values (if they was accepted early) will be reseted to default. |
|
|
|
Today version 1.7.7 released!
Changelog:- Increased the time delay of reconnection from 20s. up to 30s.
- Fixed /ping and /pool commands for Dstm.
- Fixed issue with “last share timeout”.
- Added some new bugs and changed/fixed logic to work with them: cudaMemcpu, illegal memory access, msg buffer full, 0C, 0 Sol/s.
- Fixed a bug with errors like “Failed”.
- Fixed an issue with applying the MSI Afterburner profile.
- Added 2 minutes. wait timer for full download of all MSIA graphics cards. (Only if you use the profile apply when running MSIA)
- Increase the low hash error value from 50 to 99.
- New algorithm for finding errors. More stable.
- Added support for 0 Sol/s Dstm.
- Fixed problem with false offline reports.
- New algorithm of messages “Abnormal hashrate”.
Ewbf 0.3.4 version
Claymore 12.6 version
Dstm 0.5.4 version
|
|
|
|
I'd love to see a version of this for Linux. This exactly what I was looking for, but all my miners run Linux.
When i will finish all my work on Win i will do the same for Linux  Why whenever I'm trying to delete lines in ECHO script stops working.
I just wanted to keep summary window as simple as possible, but deleting lines like
"IF %MidnightAutoRestart% LEQ 0 ECHO Autorestart at 00:00: Disabled" or
"ECHO ZEC: t1S8HRoMoyhBhwXq6zY5vHwqhd9MHSiHWKv
ECHO BTC: 1wdJBYkVromPoiYk82JfSGSSVVyFJnenB"
makes script unusable (it auto quit in a milisecond after starting).
Because I do not want to disassemble, that there was, and that became. In case if you will report to me an error. Code is like it is. |
|
|
|
|
