Good evening everyone. I'm trying to start a new rig with v6. I have 2 other rigs running with v6 with zero missteps, thank you Lolliedieb. This new miner reads 6 cards ok (2x580 8gbs and 4x470 8gbs) but will not mine more than 3 of the 6 cards even after repeated tries including restarts and a new download. And those 3 cards are running at only ~3 sol until they shut down after 3-4 minutes. A couple of times 3 of the six cards have mined at full speed (~27 sols) but then shut down after less than a minute without any error notice. The other 3 of 6 cards always just read 0 sols. Anyone have an idea? Thank you for responding.
update... I had the same results after trying to run v5,also. Additionally, the benchmark miner will not run at all....
Big, there's a known problem that occurs sometimes with using 4+ cards at the same time under a single lolMiner process which may be causing your issue. Try adjusting your .json from: "DEVICES" : "AUTO" to: "DEVICES" : [0,1] and see if that runs without problems. If so, you can add additional GPU's in there until it becomes unstable. I'm currently running just 3 GPU's per lolMiner process. Thank you for your help, CygnusMinor. Using your technique I now have 3 cards mining nominally (2xSapphire 470 8gb and 1xXFX 580 8gb). But, what gives? I have a 4x470 4gb MSI rig running smoothly and a mix of 4 XFX 580s running alongside of 2 1060s on another rig without struggle? I am getting a "Too long to connect to stratum" delay error before it starts mining now, also? Is there still a link to v4.3 around here somewhere? I might try to see if I can at least get something out of the other three cards or maybe a way to program a second separate miner on the same rig so as to run 2 separate miners at the same time? Anyone? Thanks for the help. I am using Win10. Is there a way for me to change my worker IDs to read individually on the monitor? Can I add a number or nomenclature to the end of the addy to ID each rig separately? Thanks, again
|
|
|
Good evening everyone. I'm trying to start a new rig with v6. I have 2 other rigs running with v6 with zero missteps, thank you Lolliedieb. This new miner reads 6 cards ok (2x580 8gbs and 4x470 8gbs) but will not mine more than 3 of the 6 cards even after repeated tries including restarts and a new download. And those 3 cards are running at only ~3 sol until they shut down after 3-4 minutes. A couple of times 3 of the six cards have mined at full speed (~27 sols) but then shut down after less than a minute without any error notice. The other 3 of 6 cards always just read 0 sols. Anyone have an idea? Thank you for responding.
update... I had the same results after trying to run v5,also. Additionally, the benchmark miner will not run at all....
|
|
|
what is the expiration date of the airdrop? GUI 1.0.7 wallet has a bunch of instructions that look nothing like what is explained. and if I manage to get this wallet to open I am to use my BTCZ wallet addy to get the promised matching BZEdge coins?
|
|
|
v6 should run with same config as v5, eh? Not working yet, says "EXAMPLE_BTG" not found in config file etc...
"EXAMPLE_BTCZ" : { "COIN" : "BTCZ", "POOLS" : [ {"POOL" : "mine-btcz-na.equipool.1ds.us", "PORT" : "50063", "USER" : "t1h7WGHNLx8hY97UerETfDPVfVj9QqNM94d.lolMiner", "PASS" : "minpayout=2000"}] } }
Update... So I changed to "EXAMPLE_BTG" on my BTCZ config and am now rocking a steady 14% increase on this rig. 4x XFX 580s and 2x MSI 1060s. All stock settings here. The 1060s are matching my 1060s on an OC Nvidia rig. Good job, Lolliedieb and thank you! For the life of me I can't fathom those who complain about your fees?? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
v6 should run with same config as v5, eh? Not working yet, says "EXAMPLE_BTG" not found in config file etc...
"EXAMPLE_BTCZ" : { "COIN" : "BTCZ", "POOLS" : [ {"POOL" : "mine-btcz-na.equipool.1ds.us", "PORT" : "50063", "USER" : "t1h7WGHNLx8hY97UerETfDPVfVj9QqNM94d.lolMiner", "PASS" : "minpayout=2000"}] } }
|
|
|
Still tryna figure out why lolMiner won't recognize more than 5 cards. All AMD 4x580s and 2x470s reads 3x580s and 2x470s, only. Anyone? Used to have 4x580s and 2x1060s and would read 4x580s and 1x1060. "DEVICES" in config reads "AUTO"
update.... so I prayed more earnestly and did another restart and now all 6 cards are digging. Thank you Lord!
|
|
|
I added 2x8gb 470s to my 2x8gb 580s miner and it reads all as 470s or all as 580s and only 3 of the 4 gpus sometimes or worse. Is this a lolMiner issue? Windows read them accurately as 2x470s and 2x580s. 470s are Sapphire, the 580s are XFX. Thank you for responding.
|
|
|
Is there a mobile wallet for Apple Iphones, yet?
Thanks for responding!
|
|
|
I can buy a Vega 64 real cheep right now. Anyone have hash rate and power numbers to share before I buy?
Thanks for responding!
|
|
|
hello guys, I come to show the results of a problem I have on my platform, there is a card that is giving me a much higher than normal hashrate, in fact double, then I leave the log and below my configuration roc-smi I'm using ubuntu 18.04 with the latest version of the amd-gpu-pro drivers GPU0= 4GB GPU1= 4GB GPU2= 8GB GPU3= 4GB GPU4= 4GB
==================== End of ROCm SMI Log ====================
+---------------------------------------------------------+ | _ _ __ __ _ ___ ____ | | | | ___ | | \/ (_)_ __ ___ _ __ / _ \ | ___| | | | |/ _ \| | |\/| | | '_ \ / _ \ '__| | | | ||___ \ | | | | (_) | | | | | | | | | __/ | | |_| | ___) | | | |_|\___/|_|_| |_|_|_| |_|\___|_| \___(_)____/ | | | | This software is for pool mining | | with the Equihash 96/5, 210/9 | | 144/5 or 192/7 algorithm | | | | Made by Lolliedieb, September 2018 | +---------------------------------------------------------+ lolMiner is configured to mine Anonymous Bitcoin(ANON), Equihash 144/5 Setup Miner... Using device with id 0 (Radeon RX 560 Series) Using device with id 1 (AMD Radeon (TM) RX 480 Graphics) Using device with id 2 (Radeon RX 570 Series) Using device with id 3 (AMD Radeon (TM) RX 470 Graphics) Using device with id 4 (Radeon RX 580 Series) Connecting to pool... Connected to anon.2miners.com:9090 Subscribed to stratum server Authorized worker: AnZbbfcchj72XJi5PaHFPKejZkgcendP3xD.EdwinGuarenas New target received: 000f0f0f0f0f0f0f New job received: 593523240157640 Start Mining... New job received: 164872136019190 Average speed (30s): 11.2 sol/s | 48.9 sol/s | 21.1 sol/s | 20.9 sol/s | 21.1 sol/s Total: 123.3 sol/s Average speed (30s): 11.6 sol/s | 51.5 sol/s | 21.5 sol/s | 20.0 sol/s | 22.1 sol/s Total: 126.8 sol/s Submitting share Low difficulty share Average speed (30s): 10.4 sol/s | 45.1 sol/s | 21.8 sol/s | 19.7 sol/s | 21.5 sol/s Total: 118.5 sol/s Submitting share Share accepted Submitting share Share accepted Average speed (30s): 12.3 sol/s | 47.6 sol/s | 21.9 sol/s | 20.6 sol/s | 23.3 sol/s Total: 125.7 sol/s Submitting share Share accepted New job received: 935564666706425
## 60 MINUTES AFTER
--------------------------------------------- Average speed (300s): 11.8 sol/s | 44.9 sol/s | 20.2 sol/s | 20.6 sol/s | 21.3 sol/s Total: 118.8 sol/s --------------------------------------------- Average speed (30s): 12.2 sol/s | 44.6 sol/s | 20.1 sol/s | 22.5 sol/s | 20.6 sol/s Total: 120.0 sol/s Submitting share Share accepted Submitting share Share accepted Submitting share Share accepted Average speed (30s): 10.6 sol/s | 43.9 sol/s | 20.9 sol/s | 22.4 sol/s | 21.1 sol/s Total: 119.0 sol/s New job received: 893511905410536 Submitting share Share accepted Average speed (30s): 11.3 sol/s | 43.6 sol/s | 21.4 sol/s | 21.1 sol/s | 21.3 sol/s Total: 118.7 sol/s Submitting share Share accepted Submitting share Share accepted Submitting share
##my roc-msi conf, next to the run.sh
#!/bin/bash
################################# ## Begin of user-editable part ## #################################
PROFILE=EXAMPLE_ANON
export GPU_FORCE_64BIT_PTR=1 export GPU_MAX_HEAP_SIZE=100 export GPU_MAX_ALLOC_PERCENT=100 export GPU_SINGLE_ALLOC_PERCENT=100
##Configure GPUs echo 2021 | sudo -S /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 0 --setfan 240 --autorespond Y /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 1 --setfan 240 --autorespond Y /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 2 --setfan 240 --setperflevel high --autorespond Y /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 3 --setfan 240 --setperflevel high --autorespond Y /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 4 --setfan 240 --setperflevel high --autorespond Y /home/minero/Escritorio/ROC-smi-roc/rocm-smi -d 5 --setfan 240 --setperflevel high --autorespond Y
##Miner Start
cd "$(dirname "$0")"
./lolMiner --profile $PROFILE $@
Yikes! This guy is getting 48 for his 480? 8gb! I want what he is getting, LollieDieb! Seriously, what gives? Anyone?
|
|
|
You bought at 15 sat? Some of us bought at 80+ sat, how should we feel? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) When it gets to 250 you will feel like you made a good decision, eh? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Maybe we could offer a free 5k BTCZ with ever Android wallet download? Get some BTCZ out there into the hands of someone. Anyone. Quickly.
Yes, but who pay ? There is no premine and no ICO for BTCz, and it is a very good thing. Not sure there is enough money in the marketting addresses (from miners who donate for this). People have to understand what is BTCz : it is a serious coin, not a shitcoin with just marketting and pump and dump. Be patient... in months, perhaps in years, like the begining of Bitcoin. to increase the number of users this will be a good step. of course it is necessary to allocate from the fund of the team but im think there is a sense in this. especially if to allocate to the big ranks which will confirm that they have tested. the amount is small given the price and im think the team can afford such a marketing move. The proposal to tax 5% passed as I believe. That will generate 365k coins each day. Not much in cash value but if we were giving away coins (say 1k) with each Android Wallet download we would be getting coins out where they aren't going yet. BTC was given away by truckloads in the first year or so. WE have all heard/read the stories of discarded coins. Personally, I am going to start giving thousands each day to students at UP-Dilliman in the Philippines where a Philippine peso is worth $0.02 USD, just to get some out there. They are virtually worthless to me but 30 BTCZ equals one PHP there. Someone will take a BTCZ for something, eh? Are the Android Wallets numbered? They should have a number up to maybe 100 mil. It would be a good way to measure dispersal/adoption rates.
|
|
|
BIG VANDAR PICTURE OF BTCZ ANDROID WALLET HERE/quote]
Maybe we could offer a free 5k BTCZ out of community funds with every Android Wallet download? Get some BTCZ out there into the hands of someone. Anyone. Quickly.
|
|
|
BIG VANDAR PICTURE OF BTCZ ANDROID WALLET HERE/quote]
Maybe we could offer a free 5k BTCZ with ever Android wallet download? Get some BTCZ out there into the hands of someone. Anyone. Quickly.
|
|
|
so... can I add 2x6gb 1060s to my 4x8gb 580 rig now? will it run red and green at the same time? not concerned about big hashing, just don't like the 1060s sitting idle. thanks for responding.
If your operation system allows using Nvidia and AMD mixed it will work. So you will need Windows or a custom Linux (most standard Linux do not allow AMD and NV drivers at the same time). But I will not guaranty for stability and speed. But - just to point an option - you can run the AMDs in lolMiner with --devices AMD (so only this cards are used) and open a 2nd command line with EWBF on the Nvidia cards. This constellation will give you most likely best performance. [/quote] So, for enquiring minds that want to know, I tried running the 2 6gb 1060s with the 4 8gb 580s on the same LolMiner v5. The miner will only read one of the 1060s and all 4 of the 580s. hashing ~125 for the 5 cards. I have restarted several times to see if there is a change but nothing. 1060 just 1 or 2 hashes slower than the 580s
|
|
|
so... can I add 2x6gb 1060s to my 4x8gb 580 rig now? will it run red and green at the same time? not concerned about big hashing, just don't like the 1060s sitting idle. thanks for responding.
|
|
|
WooHooo, thank you Lolliedieb for the config correction. The change in bracketing the config was the answer and now I'm hashing away on v5 at a 10% higher rate than with v42 and now I have pretty colors too! Thanks again for your efforts and everyone else who lent a hand.
|
|
|
right click on run_miner.bat and select edit. it should open in notepad.
does it say this?
set "PROFILE=EXAMPLE_BTCZ"
hey thanks! I did as you said and no, the profile example on "run miner with restart" was ZERO and the other was BTG. I changed both to BTCZ but no help as yet. "PROFILE=EXAMPLE_BTCZ" what's next? update: the run.bat says config file name and now it reads "PROFILE=EXAMPLE_BTCZ" but my config file only says "EXAMPLE_BTCZ".... delete the "PROFILE"? <<<< that didn't work either.
|
|
|
what's your run_miner.bat look like?
uhh… my what? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I just click on it? dunno how to "open" it and look at it? sorry for my ignorance, but thank you for your help..
|
|
|
{ "DEFAULTS" : { "DEVICES" : "AUTO", "APIPORT" : 0 },
"EXAMPLE_BTCZ" : { "COIN" : "BTCZ", "POOLS" : [ {"POOL" : "mine-btcz-na.equipool.1ds.us", "PORT" : "50063", "USER" : "t1h7WGHNLx8hY97UerETfDPVfVj9QqNM94d.lolMiner", "PASS" : "minpayout=1000"} ] } }
try this maybe
thanks but that made a big change that still didn't mine.
|
|
|
|