 Show Posts
|
|
Pages: « 1 2 3 [4] 5 6 »
|
|
Maybe it`s time for block halving?
|
|
|
|
Good luck!  |
|
|
|
|
Why the multipool doesn`t mine DRK at the moment?
|
|
|
|
A good concept, it feels good, worth the investment
The price today will go to 520.... |
|
|
|
http://poolz.eu:9408 - The Best P2Pool !!!
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transaction fee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - European P2Pool !!!
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - European P2Pool !!!
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - European P2Pool !!!
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - European P2Pool !!!
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - UPDATED!!! :
ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
0.5% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
p2pool.n00bsys0p.co.uk:9408 is down, any idea when it will be up and running again? as i have had to move my miners off to a multipool for now
http://poolz.eu:9408/ is online  |
|
|
|
http://poolz.eu:9408 - P2Pool node in Europe :ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
1% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - I am running a P2Pool node in Europe :ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
1% feeHow to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.You will have more stales/rejects, around 5 ~ 10% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate. |
|
|
|
http://poolz.eu:9408 - P2Pool node in Europe :ULTRA FAST INTERNET CONNECTION
Unix Server equipped with SSD, tuned for low latency
NOW THE FEE IS 0.5%How to connect:
Server = http://poolz.eu:9408
Username = your HIRO wallet address
Password = choose a whatever random passwordHighlights:
No registration, start mining directly
Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
Decentralized network, harder to attack
Transactionfee's in a block will also by payed to all miners in the pool
Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup
|
|
|
|
Oh yeah, anyone got any good settings for a 3x 270 (not x) rig?  My settings are: { "pools" : [ { "name" : "Poolz.Eu", "url" : " http://poolz.eu:9408", "user" : "HIROCOINADDRESS", "pass" : "x" } ], "intensity" : "16", "gpu-engine" : "0-1140", "gpu-memclock" : "1500-1550", "gpu-powertune" : "20", "thread-concurrency" : "8192", "worksize" : "256", "look-up gap" : "2", "gpu-threads" : "2", "failover-only" : true, "log" : "15", "sharelog" : "50", "kernel" : "darkcoin", "kernel-path" : "/usr/local/bin" } And what speed do you get with those settings? 2.1+ MH |
|
|
|
Oh yeah, anyone got any good settings for a 3x 270 (not x) rig? My settings are: { "pools" : [ { "name" : "Poolz.Eu", "url" : " http://poolz.eu:9408", "user" : "HIROCOINADDRESS", "pass" : "x" } ], "intensity" : "16", "gpu-engine" : "0-1140", "gpu-memclock" : "1500-1550", "gpu-powertune" : "20", "thread-concurrency" : "8192", "worksize" : "256", "look-up gap" : "2", "gpu-threads" : "2", "failover-only" : true, "log" : "15", "sharelog" : "50", "kernel" : "darkcoin", "kernel-path" : "/usr/local/bin" } |
|
|
|
|
