I dl'd the wallet in demo time... It do not get conection to network... is there a new conf. file or nodes to add or a new dl to get?

who do I send coin to for beer? I'm in U.S. .....

Ok mined the coin .... in the wallet .... now I wish to get my trophy beer...how do I order it ?

the faucet does not seem to be depositing to wallet? any ideas?

can I get a pool to mine at or the info to start a p2p server?

same here is there a new config for the wallet?

undervolt and underclock is good...but I like to take shots at new coins not just beat the dead horse of btc but grab a startup 256 coin quick and hope it pays off.
some will some wont but faster ghz at start = more block found :>) mining arbit coin rt now solo and have found 4 blocks in a few hours:>)
but yes I agree not much time foe btc mining and I run .11 per Kw....but I bought a solar panel and plan to get system totally off grid to run from sun!

ive add a lot of steps....
pb:value("10:400:0f82", translate("400M"))
pb:value("10:375:oe82", translate("375M"))
pb:value("12:352.5:0e08", translate("352.5M"))   .....
pb:value("11:350:0d82", translate("350M"))
   pb:value("12:348.75:2106", translate("348.75M"))   ........
   pb:value("12:327.5:0d08", translate("327.5M"))   ......
pb:value("12:325.25:0c82", translate("325M"))
   pb:value("12:323.75:1906", translate("323.75M"))   ........
   pb:value("12:302.5:0c02", translate("302.5M"))   .......
pb:value("13:300:0b82", translate("300M"))
pb:value("14:293.75:1706", translate("293.75M"))
pb:value("14:287.5:0b02", translate("287.5M"))
pb:value("14:281.25:1606", translate("281.25M"))
pb:value("14:275:0a82", translate("275M"))                   
pb:value("15:268.75:1506", translate("268.75M"))
pb:value("15:262.5:0a02", translate("262.5M"))
pb:value("16:256.25:1406", translate("256.25M"))
pb:value("16:250:0982", translate("250M"))
pb:value("16:243.75:1306", translate("243.75M"))
pb:value("17:237.5:1286", translate("237.5M"))
pb:value("17:231.25:1206", translate("231.25M"))
pb:value("18:225:0882", translate("225M"))
   pb:value("18:225:1156", translate("225M (test)"))            ........................
   pb:value("18:218.75:1131", translate("221.875M (test2)"))     ............................
pb:value("18:218.75:1106", translate("218.75M (default)"))
pb:value("18:212.5:1086", translate("212.5M"))
pb:value("19:206.25:1006", translate("206.25M"))
   pb:value("19:193.75:0906", translate("193.75M (test3)"))      ..........................
pb:value("20:200:0782", translate("200M"))
pb:value("20:196:1f07", translate("196M"))
pb:value("20:193:0f03", translate("193M"))
pb:value("23:175:0d83", translate("175M"))
pb:value("27:150:0b83", translate("150M"))
pb:value("33:125:0983", translate("125M"))
pb:value("40:100:0783", translate("100M"))

the ones with dots are very experimental..... I do not suggest anyone else try...

I don't like the use of "temperamental" it's all hard ware and science they don't have moods they have bad chip or brown caps that explode or resistors that swing wide in there tollance range or parts that get to hot and the resistance goes up so performance go down but just moody?  I've been OC'ing from back in the days of 600mhz amd's to the first 1ghz cpu......It's bothering me to see it boot and run at 500 +  only to have that speed disaper with no good reson......I'll be losing sleep till I understand what is occurring. 

I would love to see ur  vim /usr/lib/lua/luci/model/cbi/cgminer/cgminer.lua  file to make sure of my ##'s

I can only get burst of Oc's for 10-15 min's then the bottom drops out and it goes down to 200-360 range no good but still stable at 218 @ 430 GH/s

I'm missing something!

ok running great at 218 about 430Gh/s if I do 262 @ 0750 it starts great in the 550 range but by 15 min mark it tanks down to 380's
same if I do 281.25 @ 0755  starts great thin drops fast to a slower than norm speed, could it be a lack of power? or is something else going on?

Igot this set up and my vid miner on the system works fine but I cant seem to get my antminer to wallet mine. What am I doing wrong?

what would the config file for the wallet to solo mine look like?

ok using oct flash with custom ##gh/s updated in file
I can change volts and Mhz
so far turning it down to 212 MHz has given a 435 gh/s
looks solid, will try others soon
how do I find out which batch my miner is?
and what is the code for setting dif to 256? I know the bitaddress+256 thing but is that before or after the worker? #######.ant1+256 or #######+256.ant1?

any tips on the volt moding? is there a good gui to do it or a file to change? or is it old school and time to break out the old no.2 ?
P.S. have adj the file to 325 and it boots
ran 1 hour got stats of
27 hw     1397accpt/5148discard        avg. Gh/s 425.40      temps 41/44

has anyone tried higher freq's like these in an S3?
        #option 'freq_value'    '0f82'  #400M
        #option 'chip_freq'     '400'
        #option 'timeout'       '10'

        #option 'freq_value'    '0e82'  #375M
        #option 'chip_freq'     '375'
        #option 'timeout'       '10'

        #option 'freq_value'    '0d82'  #350M
        #option 'chip_freq'     '350'
        #option 'timeout'       '11'

        #option 'freq_value'    '0c82'  #325M
        #option 'chip_freq'     '325'
        #option 'timeout'       '12'

        #option 'freq_value'    '0b82'  #300M
        #option 'chip_freq'     '300'
        #option 'timeout'       '13'

        #option 'freq_value'    '0a82'  #275M
        #option 'chip_freq'     '275'
        #option 'timeout'       '14'
   
        #option 'freq_value'    '0982'  #250M
        #option 'chip_freq'     '250'
        #option 'timeout'       '15'

just playing with oc'n my use s3.

ok ur running shy on time now.... can we get a pool address so we can get our miners pointed and rdy for launch?

ok 2 old power supplys for now till the new one comes in.
as far as the solo mine i dont want to solo btc i want to solo some of the new crap coind comming out, i could do this directly from the wallet for my vid car and cpu but how to config the wallet to accept a conection from my ant miner. it would be nice to know the steps to pull off a mine on a low dif coin before it get to hard to solo mine and then switch to pool/stratum. in order to do this i need to setup wallet adn mine in the first hour's of coin start...thats when there are no good pools rdy yet.

i got the only 256 part but bitmain told me it only mines bitcoin, but i've been mining uno on a stratum srever.  last night i blew up power supply so i have an older one runing one side of the s3 can i use a dif power supply to power the other half as long as i dont plug the 2 power supplys into the same side rt?

and lastly is there a way to solo mine with the ant to a wallet download like i did with my vid miner(sgminer) or my cpu miner(minerd) or am i stuck with outside pools like stratum and p2p....can i start my own p2p and loginto that to solo mine wallet? just a point in the rt dir. would be nice.

just got a used s3 antminer.... was wondering if there are flashes that would allow more cstom options or allow for mining other coins than btc?