Guys,

I have over 10 asus z270-a's and decided to try the new Asrock H110 BTC+

After several hours i finally got this thing to boot properly(very glitchy at this point)

My issue is that the internet connection is super slow. I have researched it and it uses an Intel I219-V network adapter which of course a lot of folks have had issues with over the last few years in ASUS boards.

I have run the onboard diagnostics and it keeps telling me that the cable is bad or that the router and or switch is not set up properly.

Changed out cables, changed out switches etc...

Just wondering if someone has run into an issue with this network adapter in the past ?

Thanks in advance

I have a GPU that is acting up, its hashing way less than the others....i can see its not stable in afterburner.....but for the life of me i cannot figure out which one it is. I have 8 of them running

I hope someone out there has run across this issue and can shed some light

meaning is the first one on the board GPU 0 and the next is GPU 1 etcccc... ?

Thanks in advance

Thanks Claymore !!!

Any good news for Vega owners as far as hash rate on the new release ?

Thanks for the response

Yes i have a new asrock h110 btc + running with 8 nvidia cards and wanted to add some AMD's but wanted to see the miner's limitation...i really dont want to open another instance

Hi Guys

how many GPU's can claymore handle at one time with only one miner running ? Meaning only one instance ?

Thanks in advance

Guys

how many GPU's can claymore handle at one time with only one miner running ?

Thanks

Ortek

thanks for the response...for the life of me i cannot figure out in the bios how to configure power back on after power loss ?

Thanks in advance

figured it out

AMD's dont like high -dcri like the NVIDIA's

so this is my ETH only file

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x560574717F27Bc5814cF9cB02Da085fA0EF50449 -epsw x -eworker tampaminer-1

and this is the one that drops my MH on ETH to 12mh...although this works great on my 1070's on a separate rig

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x560574717F27Bc5814cF9cB02Da085fA0EF50449 -epsw x -eworker tampaminer-1 -epsw x -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal 72943d9b9b3556279dc8045537c1de174dc0eee444c8be1a49e05142d9c245fcbea0e51e891d/tampaminer-1 -dcoin sia -allcoins 1 -dcri 60

sorry

just RX470's...actually only one at the moment so that i can figure this out

Yes the reduced ETH is only when dual mining

I also went ahead and did a complete driver clean and installed 16.9.2

Thanks

g4400
asus z270-a
8gb ddr4
sapphire rx 470 nitro (non +)

yes i did and it lowers ETH even more and raises SC ?

Guys,

I have 10+ gtx 1070 rigs with 8 GPU's each but i came across a bunch of rx470 and this is all new to me.

I got them modded Sapphire RX 470 Nitro(non +)

they are happy at 28.5 but when i try and dual mine with SIA i get 600+ on sia and ETH drops to 12+- MH

I havent  added any - drc setting

Anyone have any ideas what im missing ?

Thanks in advance

thats what i was afraid of...yes newegg so here we go with an RMA

thanks again

Hi guys,

of course i decided to try a new motherboard. I have over 10 asus z270-a's running 8 GPU's without issue...and of course cannot get this one to just boot up properly.

First its slow to boot up. When i can get it to boot up it it will not boot up again unless i shut it off and disconnect the power source and thats not 100%every time. So i swapped 2 diffeerent PSU's and have tried 2 different new CPU's and nothing.

So i started to swap out the memory thinking thats it. The only way i can get it to boot up and again its not 100% all the time is by only have a 4gb stick in the second slot. I have tried several types of sticks and have also lowered the pc down to 1600 just in case and nothing.

I have connected the extra molex connectors to the board and have reset the bios as well.


I cannot figure out this freaking board !!!

Thanks in advance

its either has a bad riser or not getting enough power..ive had the same issue

Guys

I have a question. I want to lower my clocks on my 1070's. I have 70% power with 70 temp limit. The moment i lower the clocks the temps go up. The mem overclock does not affect the temps.

I dont quite understand why. is this normal ?

Thanks

Hi Guys

I have installed the new ethminer and its hashing on ethermine BUT its not showing a reported hashrate ?

It does show that its submitting found shares thou

Has anyone run into this problem

mining with 6 1070's

Thanks in advance

lower your clock rates

Hi All,

I have several rigs mining ETH using claymore. Is it normal for the hash rates to fluctuate up and down. Sometimes its the first GPU then its a different one.

Is it a power issue ?

Thanks in advance

do a clean uninstall of your nvidia driver and then re install