After clicking the „create a new card“ button (EU card) and filling the address and DOB field the next step on the following page is uploading the necessary documents. There is no option to skip this. But some time passed since i tried this. If that is a mistake in the ordering process i would be very happy if you check and change this.
You should be able to click through the ordering process by choosing Continue without submitting documents. You will receive an email notification saying the card order is pending, and you can get in touch with support saying you're fine with non-verified limits and features. This should take care of it. I will re-try
|
|
|
After clicking the „create a new card“ button (EU card) and filling the address and DOB field the next step on the following page is uploading the necessary documents. There is no option to skip this. But some time passed since i tried this. If that is a mistake in the ordering process i would be very happy if you check and change this.
|
|
|
Yes, i think so. They are looking for a new bank as far as i know. Germany has some very crypto friendly banks that allow remote opening of business accounts. Maybe these would be a good choise.
|
|
|
@ADVcash support
Didn‘t you talk about an option to order an unverified card for EU area here!? So no need for ID documents under limitation of limits. I was trying to order this kind of card but your support told me that‘s not possible. I also couldn‘t find an option to do so.
|
|
|
At times it is better to ask for direction about a business as a newbie than to cry out after an unsuccessful out o the business, privcoi.io is a multi Coin Mixer platform but visiting the website with any metamask enabled browser will shows a warning sign about the current status of the website operations. I wrote to them in the mail, but I did not wait for an answer. Try to change your translator tool or reine your translations with more than one translating tool, it will make your communication more understandable. No need to worry! I also had two „hanging“ payouts in the past. They sent back both transactions without any hassle. Just write to their support and wait a little bit. All will be fine!
|
|
|
I really like Monero and i love the fact that the gui works with Tails OS, but don‘t you think it would be time for an easy to update/upgrade Debian package? I do not know how much work is behind this but for users like me, that need the wallet one or two times a month, it needs time to get all working after every version update. Would be nice to see this working automated and quick by apt-upgrade.
|
|
|
I can also help with that. I am from middle Europe but i have more then one option avaliable for a receiving country. If still necessary just let me know...
|
|
|
Where can I get some precompiled binaries. Loool. I really wish xmr.to would add a few other coins, that's one of the best privacy tools I know of. I was making a joke of what would be added to recompiled binaries. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Yes i know, if it looks too good to be true it probably is, but a Monero based privacy tool for other alts like ETH would be awesome, and maybe one day xmr.to adds a few other coins, like ETH. Edit, I use xmr.to all the time, anytime I send btc, but for ETH it's hard to remove your history Yes these guys are great! There is nothing bad to say about xmr.to But i would be happy if they add an exchange option without having to set a fixed BTC ammount at the beginning. So: you get an monero address and send your avaliable monero to it, without fixing an ammount. And you get the exchanged ammount payed out, depending on monero sent.
|
|
|
up once more ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
up ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
Hey everyone, You may have heard about the beta testing of our new cards from Twitter (which you should totally follow, twitter.com/advcash) We are sending out newsletters to users of the Russia program today, EU to follow soon, and international after that. If you are a EU user and would like to be among the first to get our cards, please enroll as described here: https://twitter.com/advcash/status/1141288981646254080We will be rolling out news as they become available, including news about the beta of the international program and how you can participate. Another thing to check out, we added fast crypto purchases. Check out the Deposit Funds section of your ADV account. You can enter the amount to be charged from your credit card and have the crypto of your choice, Bitcoin, Ripple, Ethererum, whatever, sent to your crypto wallet right away. No more need to add funds to ADV and withdraw them to crypto making several transactions. Purchase crypto in just a few clicks. You will need a credit card you used to make a deposit earlier. See your ADV account for more info. Let us know about all this, we would love to hear your feedback. Have a great day everyone! Are there still promo cards avaliable? I would be definitly interessted!
|
|
|
I will have to create an account first. But u will do so when i have the time to. Thanks. Just to give a little update: I did what you asked for and created an issue in github. I gave them all the information i was asked for and it seems that this is a problem that only happens to Armv7 devices. But thats all i can say, as i did not really understand what happened ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) . My coding skills are far below that level... ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) But hopefully this is solved soon. I will wait a little bit now before i re-try...
|
|
|
Hi, I upgraded my wallet from v12 to v14. But I am having an issue: monero-wallet-gui.exe does not work. It only appears in Task Manager for a second, and then immediately exits. No log file is created so I am at a loss what happens. Previous version worked OK. I downloaded the archive from official website (not the installer) and replaced all files in my Monero folder as usual. Since then, monero-wallet-gui.exe did not work. I then ran monerod.exe, which worked OK. At first it upgraded blockchain database from version 1 to version 2, then 3, then 4 (if I remember correctly). It is synchronizing blocks as I write this post. So my blockchain db is not corrupt. I tried running the GUI wallet while monerod.exe is running, same result. And turned off Avast antivirus temporarily, same result. Can anyone advise what to do, please?
Do you have active AV (AntiVirus) software on that system? Yes and Monero folder is under exclusions. And disabling AV makes no difference. Previous version (v12) worked without problems. Can you try launching via the start-low-graphics-mode.bat batch file that is included? That was one of the first things I tried but forgot to mention... same result: the gui exe only appears in task manager and then immediately quits, with no log created. I have a feeling your AV is still deleting necessary files (i.e. files required in order for the GUI to run properly). Can you perhaps try these steps: 1. Reboot to ensure all Monero related processes are closed. 2. Apply this guide -> https://monero.stackexchange.com/questions/10798/my-antivirus-av-software-blocks-quarantines-the-monero-gui-wallet-is-there3. Note that step 2. implies that you have to re-extract the .zip file. 4. Start monero-wallet-gui.exe again. Does it launch properly now? That made me try one more thing: back up all Monero folder contents into a 7z file, delete all files and folders from inside Monero folder, and extract downloaded Monero wallet files anew (so that there are no leftovers from older versions). Monero GUI wallet is now running as it should. But I don't know why, it launches the daemon (monerod.exe) in a separate command line window. Previously it ran only in the background, not displaying a separate window. Probably that has been changed, but is no big issue, just noticing. That is due to a bug in the build system and the issue is kind of difficult to debug. However, I expect it to be fixed once deterministic builds are available for the GUI (we're working with TheCharlatan to get deterministic builds going for the GUI). After reading Meks posts i checked my monerod log files and it seems his problem and mine are similar in some things. I made a fresh setup (again) and built everything up from zero. So there is no old data left. Same result at 65%- some SSL error After starting monerod again, again and again i checked the monerod logs again: The log file from monerod stops updating after the first run and the following error! Similar to what Mek said... Btw. I am running monerod on a seperate linux mashine only used for monero. Nothing else then ubuntu and monero installed.
|
|
|
I will have to create an account first. But u will do so when i have the time to.
|
|
|
Same problem, but this time the error happened at 9% sync. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Seems to be a SSL problem...
|
|
|
You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!? My problem: To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why.. When i start monerod again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.
The last version of the daemon was slower but worked constant. What could be the problem?
You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool. A very interresting update on my situation: I deleted the whole .bitmonero folder, cleaned up and started from scratch without the prune-tool-> same issue! At 66% the sync stops for reasons i can not find. So just to have all tried, i created a completely new node on a different device (bananapi pro) and started sync from beginning. As i checked the logs some minutes ago i see the same problem at 66% as on the other device: " 2019-06-27 03:24:22.495 [P2P9] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1390 [1;33mSynced 1237971/1865802 (66%, 627831 left)[0m 2019-06-27 15:49:30.527 b6f14210 INFO logging contrib/epee/src/mlog.cpp:273 New log categories: *:WARNING,net:FATAL,net.http:FATAL,net.ssl:FATAL,net.p2p:FATAL,net.cn:FATAL,global:INFO,verify:FATAL,serialization:FATAL,stacktrace:INFO,logging:INFO,msgwriter:INFO 2019-06-27 15:49:30.529 b6f14210 INFO global src/daemon/main.cpp:281 Monero 'Boron Butterfly' (v0.14.1.0-release) 2019-06-27 15:49:30.532 b6f14210 INFO global contrib/epee/src/net_ssl.cpp:124 Generating SSL certificate 2019-06-27 15:49:46.772 b6f14210 ERROR msgwriter src/common/scoped_message_writer.h:102 Error: Couldn't connect to daemon: 192.168.0.171:18088" Whats the problem ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ------ Edit: I started the sync again and watched it . After about 100 blocks it stopped with comment Segmentation faultDo you have sufficient free disk space on both systems? Also, why are you using a non default port? Used: 15.48GB (14.13%) Free: 94.06GB Total: 109.53GB So space is not the problem. I choosed a random port. Is that important? I changed to 18081 now. Could you perhaps, for testing purposes, try a full resync from scratch with the default port? My plan was to to delete EVERYTHING on my cubietruck! Flat all content and then start with a fresh OS and daemon. What makes me confused the most is that i had it synced to 100% already... then i wanted to be save in every way and deleted the blockchain folder to start new, and now a lot of problems come up.. But to answer your question: Yes, i can do so! p2p on port 18080 (opened firewall port) bound to ip 0.0.0.0 rpc on port 18081 (port closed on fw) bound to internal ip 192.168.xxx I will let you know soon.
|
|
|
You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!? My problem: To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why.. When i start monerod again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.
The last version of the daemon was slower but worked constant. What could be the problem?
You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool. A very interresting update on my situation: I deleted the whole .bitmonero folder, cleaned up and started from scratch without the prune-tool-> same issue! At 66% the sync stops for reasons i can not find. So just to have all tried, i created a completely new node on a different device (bananapi pro) and started sync from beginning. As i checked the logs some minutes ago i see the same problem at 66% as on the other device: " 2019-06-27 03:24:22.495 [P2P9] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1390 [1;33mSynced 1237971/1865802 (66%, 627831 left)[0m 2019-06-27 15:49:30.527 b6f14210 INFO logging contrib/epee/src/mlog.cpp:273 New log categories: *:WARNING,net:FATAL,net.http:FATAL,net.ssl:FATAL,net.p2p:FATAL,net.cn:FATAL,global:INFO,verify:FATAL,serialization:FATAL,stacktrace:INFO,logging:INFO,msgwriter:INFO 2019-06-27 15:49:30.529 b6f14210 INFO global src/daemon/main.cpp:281 Monero 'Boron Butterfly' (v0.14.1.0-release) 2019-06-27 15:49:30.532 b6f14210 INFO global contrib/epee/src/net_ssl.cpp:124 Generating SSL certificate 2019-06-27 15:49:46.772 b6f14210 ERROR msgwriter src/common/scoped_message_writer.h:102 Error: Couldn't connect to daemon: 192.168.0.171:18088" Whats the problem ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ------ Edit: I started the sync again and watched it . After about 100 blocks it stopped with comment Segmentation faultDo you have sufficient free disk space on both systems? Also, why are you using a non default port? Used: 15.48GB (14.13%) Free: 94.06GB Total: 109.53GB So space is not the problem. I choosed a random port. Is that important? I changed to 18081 now.
|
|
|
up as still avaliable! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
-snip-
Für mich wäre es auch interessant zu wissen, bei welchem der Anbieter die Cryptos vorher in fiat getauscht werden müssen, und bei welchem sie erst zum Zeitpunkt des Kaufes "umgewandelt" werden.
Suche hier immernoch einen passenden Anbieter, kann jemand helfen? Also einen, der meine BTC verwahrt und nicht direkt in € umwandelt, sondern erst, wenn ich die Karte nutze (und dann natürlich auch nur für den Betrag der bezahlt wird!). Habe schon händisch die FAQ's und AGB's der einzelnen Firmen durchforstet aber nichts finden können. Ich denke am ehesten würde vom konzept her bitwala dem nahe kommen: https://www.bitwala.comAllerdings musst du selbst vorher den verkauf deiner bitcoins einleiten...
|
|
|
You said that the „—prune blockchain“ option needs to be includet every time the daemon is started, right!? My problem: To be safe i deleted the old blockchain database and started a fully new sync. The daemon was running till 66% and then he stoped and shut down. I don‘t know why.. When i start monerod again with „--prune blockchain“ i get the error „could not start sync- to many dirty blocks“. When i do the same with „-db salve“ instead of „-prune blockchain“ it starts to sync again but also shuts down some hours later.
The last version of the daemon was slower but worked constant. What could be the problem?
You may have accidentally corrupted the blockchain. There's also a bug in v0.14.1.0 due to which pruning on a sync from scratch does not function properly. I'd suggest to perform a normal resync from scratch and thereafter utilize the pruning tool. A very interresting update on my situation: I deleted the whole .bitmonero folder, cleaned up and started from scratch without the prune-tool-> same issue! At 66% the sync stops for reasons i can not find. So just to have all tried, i created a completely new node on a different device (bananapi pro) and started sync from beginning. As i checked the logs some minutes ago i see the same problem at 66% as on the other device: " 2019-06-27 03:24:22.495 [P2P9] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:1390 [1;33mSynced 1237971/1865802 (66%, 627831 left)[0m 2019-06-27 15:49:30.527 b6f14210 INFO logging contrib/epee/src/mlog.cpp:273 New log categories: *:WARNING,net:FATAL,net.http:FATAL,net.ssl:FATAL,net.p2p:FATAL,net.cn:FATAL,global:INFO,verify:FATAL,serialization:FATAL,stacktrace:INFO,logging:INFO,msgwriter:INFO 2019-06-27 15:49:30.529 b6f14210 INFO global src/daemon/main.cpp:281 Monero 'Boron Butterfly' (v0.14.1.0-release) 2019-06-27 15:49:30.532 b6f14210 INFO global contrib/epee/src/net_ssl.cpp:124 Generating SSL certificate 2019-06-27 15:49:46.772 b6f14210 ERROR msgwriter src/common/scoped_message_writer.h:102 Error: Couldn't connect to daemon: 192.168.0.171:18088" Whats the problem ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) ------ Edit: I started the sync again and watched it . After about 100 blocks it stopped with comment Segmentation fault
|
|
|
|