Danke für die Warnung. So weit habe ich nicht gedacht. Werde das Betriebssystem aber sowieso neu aufsetzen müssen. Habe das Thema Mining über Bord geworfen. Wohne in einer StudentenWG (Strom für Lau) doch als mir dann bewusst wurde was ich dem Haushalt mit meinen Mitbewohnern zumute mit den vielen Kilowattstunden und dem Lärm für ein paar Kröten die ich sowieso für eine Bratwurst verballert habe, habe ichs dann doch sein gelassen. Auch dadurch dass das Internet umsonst ist, hatte ich keinen Vollzugriff auf den Router und musste das über den Umweg machen. War aber ein lustiges Projekt und es hat Spaß gemacht das ganze zu bewerkstelligen. Ausserdem ist es schön so eine Maschine für so ein Schnäppchen (300 Euro samt Rig) bei sich zu haben. Aber das wars dann auch schon. Vielleicht wird die Utopie doch irgendwann mal Realität. Es ist jedenfalls eine schöne Vorstellung ein ganzes Imperium damit aufzubauen.

samsung kommt aus korea und die hatten zu enjin gewisse beziehungen aufbauen können so einfach ist das.
wers jetzt mit der technik so genau nimmt. das ist nicht unbedingt das was den wert eines coins ausmacht, sondern eher die beliebtheit.
dass samsung aber enjin implementieren will ist nichts weiter als ein rumor und "heisse luft". da biegt sich jeder seine wahrheit zurecht wies ihm passt.
ich habe ungeduldig auf das s10 release gewartet und wirklich kaum einer bis garkeiner hat sich getraut stellung zu der sache zu beziehen und zu sagen, dass der coin NICHT im wallet ist. warum auch wenn der rumor weiter lebt, dann kann man weiter gewinne einsacken. das ist teilweise noch bis heute so. selbst enjin versucht durch regelmäßige posts die kurse zu stemmen. ich muss sagen ich habe mich sehr auf den hype gefreut und so ganz unschuldig bin ich auch nicht an er ganzen sache durch die kurssteigerrungen, aber eigendlich war ich von der ganzen sache schon recht enttäuscht. da stellt sich dieser samsung typ hin mit dem hintergedanken dass ein schöner trubel entsteht, bestimmt schon selber vorher reininvestiert und danach entpuppte sich das ganze als heisse luft. dass sich samsung solchen dingen bedient fand ich dann auch nicht so toll. hab da schon etwas hoffnung in samsung reingesteckt, dass die doch nicht sowas abziehen aber mit dem release haben die mich als investor schon recht enttäuscht muss ich sagen.

markets are irrational sometimes. maybe tomorrow is the big day. who knows.

Hab das Problem gelöst. Einer aus dem englischen Forum konnte mir helfen. Das war aber ein sehr komplizierter Vorgang. Er hat mir nen MS DHCP Server auf den Rechner angelegt über TeamViewer und die IP auch in der Reg so verstellt dass ich dann eine Verbindung herstellen konnte. Er hat gesagt, dass er demnächst ein Tutorial dazu hochladen wird falls irgendwer auch Probleme damit hat oder bekommt.

We made a Progress!
im now getting packages back and i got a new ip which is now called 192.168.137.1

the mistake i made was Setting the homenetwork to Ethernet 2 now i have set it to Ethernet 1 and it seems that the miner is online.
but i still got the Problem that i dont know how to acess the site. when i type in the ip it doesnt work.

Edit: Sorry the ip is still the same i dont know how it got this ip it was on tcp/ip i now switched it to dhcp again.
but its good that the miner is giving a live sign

one moment i will post the specs here

this is what i did



and this is what i got





Edit: Step 6 is a bit unclear for me.

"Before they can start using your shared connection, users on your network need to configure their TCP/IP settings so that they get an IP connection automatically."

Should i  also switch the ethernet connection to tcp/ip? I just made the checkmarks.

i tried the method with changing the phones ip but it doesnt work. the phone itself connected with the data you told me but the miners ip is still the same and nothing changed.

okay i have acknowledged it with the ip 5.X.X.X.X.

to point 1. i had one issue when turn on my smartphone and advancedipscvanner it says that its online, but when i turn the miner on the advancedipscanner is kinda reacting to that ip adress. it appears to be offline and sometimes just the ip shows up even though i have named the Connection to "Smartphone" before. i have looked all over Google to Change that Android ip adress but i dont know how to change that adress.

to point 2. the miner itself has dhcp and when i look over ipconfig /all it says that dhcp is activated, but it still gives me the same ip adress which is called 169.254.157.47. i tried to use these two buttons on the miner which are called "reset" and "ipset"

EDIT: I found out on google that this ip 169.254.X.X is a most common ip when there is no ip configuration, so i think this is a main point why it doesnt work. a Internet site also mentioned that i have to check if dhcp is active (is active) or the point you spoke about if the dhcp has free ips to give away. Maybe the Smartphone is Blocking it but i dont know how to delete this ip. when i turn the device of the ip is still in the scanner so i think its still blocking it.

there is also no standard gateway and the miner doesnt send any packages back as unidentified Network.
i have connected the miner via ethernet cable to my pc. i dont know if its okay to connect it like that or directly to the router. i dont have direct access to it.

https://www.bilder-upload.eu/bild-eb6a99-1552909913.png.html

to point 3. i will buy a new ethernet cable today but first i need to know if its okay to connect the miner to the pc.
i also tried to use admin admin but it didnt worked.

yes the parts are the same on the dragonmint.
it has ipset and a reset button.
i tried these buttons allready but it didnt worked,
tomorrow i can try using ipconfig and check if the ip changes or trying anything else
in combination with the new informations i have gathered here to find a solution.

if anything changes i will report.

Edit: The IP is still the same. 169.254.157.47, but miner itself has DHCP.
One question: Should the miner be connected directly to the router or is it okay to connect it to the PC?

i have the feel the main Problem is the standardgateway.
when i turn dhcp on there is no standardgateway.
the miner also doesnt send any packages.

when i tried to put in manually the thp/ip data
ipv4 172.16.2.35
subnetmask 255.255.255.0
standartgateway 172.16.2.1 (router)
dns 8.8.8.8

an info message from windows appearing saying:
many standardgateways offer redunancy for one Network (for example Intranet or Internet). the standardgateways dont work properly, when they are on two seperated Networks (one Gateway in Intranet and one in Internet). Should the configurations Safed?

i also tried to run windows diagnosis. first it said restart the router. after i did that it said: standartgateway wrong.
when i used Google it said that the standartgateway is the router adress. when it wont connect to the standartgateway it doesnt connect to the Network at all and i think that explains why i cant Access the site and it doesnt send any packages. i mean when i use the ipscanner it is finding the ip but i dont have any access to the miner.

EDIT: I found out the the ip 169.254.X.X is a most common ip for ip connection Problems. it says that there is a problem that it doesnt give any dhcp ip and when it cant windows gives automatically a ip in this range. the internet site says i have to check if the dhcp in lan is active or free ips to give (the problem mikeywith mentioned in his thread)  

EDIT As mentioned in the other thread i made a progress. with the help of mikeywith i have set up the dhcp connection on my computer and now i am able to recieve packages in the connection. the ip is still the same and it is still unknown how to acess the site.

no it isnt when it automatically connects it gives the ip 169.254.157.47. Far away from my local network range. i tried to set the ethernetconnection to the same subnet manually (with beginning 172.16.2.X)
https://www.bilder-upload.eu/bild-eaa6fa-1552857709.png.html
the good thing is that the ip scanner found the ethernet connection.
when i turn on the miner the symbol also lights up.
https://www.bilder-upload.eu/bild-3d3383-1552859274.png.html

but when i try to access the ip via browser it says no connection.
here are the ip settings for the ethernet connection
https://www.bilder-upload.eu/bild-0aee45-1552859963.png.html
at the ip i took the ending 30 as ungiven ending
then the same subnetmask of my wlan pc internet vonnection
and also the same dns server
the standart gateway is the ip from the router.

as in my post before i also recognize that the connection doesnt send any packages back.
it has always been like that.
maybe thats the reason that i cant access the site because no information is getting from the miner to the computer.

i also heard that the miner connects with dhcp only.
so i dont know if its the right way to change the ip adress manually because then it would be tcp/ip.

When i look on my screenshot it seems like it is in different subnets
the ethernet connection is 255.255.0.0

my wlan pc internet connection has subnet 255.255.255.0.

Here it is
https://www.bilder-upload.eu/bild-00d627-1552851938.png.html

looks like there doesnt exist any Gateway
i also recognized that the ethernet connection doesnt send any packages back.

When i put off the miner it gives me this
https://www.bilder-upload.eu/bild-888dc9-1552846236.png.html

When i turn on the miner it gives me this but after a short period of time
sometimes it does sometimes it dont
https://www.bilder-upload.eu/bild-fc9caa-1552846076.png.html

the telephone also appears to be offline after i turned on the miner
https://www.bilder-upload.eu/bild-9417cc-1552846834.png.html

it seems like its reacting to that ip address.

What i want is to gain access to my miner. the problem i have is that it doesnt have any ip configuration and i also dont have any imaginations how the adress should look like and in which range. I took a look at ipconfig and my local ipv4 adress is 172.16.x.x. but im not sure about that if its the local one.

Nono, i thought putting the mobile off would solve the problem. I try to gain acess with my Computer.

Edit: I looked in this ip range and i found 4 devices. its my 2 PCs my telephone and the router ip.

My router has DHCP but i dont have access to my router to set a new DHCP range.
What should i do?

I think it has the subnetmask 255.255.255.0 because when i start the AngryIPScanner it automatically Scans from 0 to 255.

It is using 3 Hosts. The Router one with ending .1 mine with ending .28 and the last one ending .29

I dont know what exactly to do. This step is a bit unclear for me.

The IP Scanner doesnt recognize my phone at all but the Internet of it works.

When i look at whatsmyip i see it has a different number than on the scanner.

EDIT: I tried to run the scanner on the static ip netmask from 0 to 255 and i found a big amount of alive hosts. but i still got Problems with Setting a new ip adress for the miner. when i look at my my ip at whatsmyip i see that it is the router ip. also when i check it on my phone it gives me the same ip adress

Im totally confused about this and dont know what excactly to do

Hello Guys,
hope someone can help me. I bought the Dragonmint T1 and i set everything up. Lights are coming on and the miner is working.
But there is an issue: I cant find the IP adress or get anything to get access to the miner. Here are the things i tried:

- I connected the ethernet cable to two different computers and got the same issues.
- I tried to connect the miner directly to the router and it also doesnt work
- The connection reacts to restartings, on/off and plug in and off of the ethernet cable but it says: unidentified network
   i see that it is sending packages to the miner but the miner itself doesnt send anything back. when i used the windows troubleshooting
   it says: No IP Configuration
- I tried to change the ip adresses manually but it still doesnt find anything
- I checked if dhcp is activated
- I restarted the router, the computers and the miner, also tried set ip on the miner
- After AngryIPScanner i also tried a different scanner which is called AdvancedIPScanner

A problem that i have is, that i am not the admin of the router, so i cant check the specs, ips and such but i have all permissions to connect devices to the network because i have the internet access keys (not the router password)

I really hope there is still a solution to get it to run and someone helps me. Thank you very much.

Hallo,
habe den Ethernetkabel mit meinem Rechner verbunden jedoch habe ich das Problem, dass dieser den Miner nicht erkennt.
Ich habe versucht nen neuen Treiber zu laden hat aber nicht geklappt.
Habe auch neben Angry IP Scanner den Advanced IP Scanner versucht hat ihn auch nicht erkannt.
Wenn ich nun auf das Netzwerk und Freigabecenter gehe merkt meine Computer, dass eine Ethernet Verbindung besteht,
jedoch steht da, dass das Netzwerk nicht identifiziert werden kann. Habe ebenfalls eine Problemdiagnose gemacht und es wurde gesagt, dass irgendetwas mit der IP Konfiguration nicht stimmt. Was ich nun damit anfangen sollte wusste ich auch nicht.
Was ich noch sagen kann ist, dass Windows darauf reagiert, wenn ich versuche die IP beim Miner zu resetten. Jedoch bleibt die Verbindung aus und es steht weiterhin nach der Netzwerksuche nicht identifizierbares Netzwerk.

Ich hoffe jemand kann mir helfen.

danke für deine hilfe konnte doch noch so ein teil bei saturn kaufen grade nach hause gekommen der dragonmint läuft prima 

ja genau so sieht die buchse aus

hallo,
ich habe die problematik dass bei meinem myrig netzteil kein kabel mitgeliefert wurde. wo bekommt man das her? ich habe gegooglet und nichts gefunden. kann mit bitte da einer helfen, falls einer das selbe problem hat oder weiss wo man eins her bekommt?

es ist ein kabel mit 200-240v / ac 10a 50/60hz

danke