thanks alot sir, payment received

kalo ane sih gan buat ngusir debu pake koas kecil aja gan,tapi kalo mau sekalian bersih semua jeroannya,ane pasti mempersiapkan koas kecil, obeng laptop yg mungil2, deep cool z9(ganti pasta vga), minyak kayu putih(buat bersihin pasta yg lama)
 
   https://i.imgur.com/Vf4IIGQ.jpg

ntar ane klo ada waktu momen bersih-bersih rutin tiap 2 bulan sekali, ane sekalian bikin post tehnisnya"cara bongkar GPU card dari awal sampai beres" plus gambar-gambar bongkarnya biar bikin kinclong lagi GPU nya dan temperature GPU ga panas lagi klo udah ganti pasta.   

Beberapa post di bawah sudah ada yang ngasih merit gan, siapa tahu agan mau menambahkan.
minta di review tentang teknis mining GPU altcoin:
1. https://bitcointalk.org/index.php?topic=3077782.0
2. https://bitcointalk.org/index.php?topic=2435467.msg25114059#msg25114059
3. https://bitcointalk.org/index.php?topic=2447041.msg25118884#msg25118884
4. https://bitcointalk.org/index.php?topic=2466000.msg26427543#msg26427543
5. https://bitcointalk.org/index.php?topic=2171209.msg26426018#msg26426018

mkasih agan-agan

ijin ikutan lomba, siapa tau dikasih lagi merit ama c agan yang baik hati:
1. https://bitcointalk.org/index.php?topic=3077782.0 (post)
2. https://bitcointalk.org/index.php?topic=2435467.msg25114059#msg25114059 (reply)

mudah mudahan dapat, mkasih sebelumnya

Mungkin banyak orang sudah mengetahui triknya, tapi tidak ada salahnya ane buat post tentang trik menggabungkan 2 psu untuk 1 rig mining GPU,
trik ini untuk menambah power GPU untuk 5 atau 6 vga card di dalam 1 motherboard(H-81 pro btc yang saya gunakan), contoh dengan daya PSU ke-(1) 700watt(primer) dan PSU yang ke-(2) 700watt(sekunder), total menjadi 1400 watt untuk 1 rig mining.

Kalo lagi ada dana nya, sih gak papa, kita bisa langsung beli PSU dengan watt yang cukup besar misalnya yang 1500 watt atau 1600 watt.
trik ini untuk agan-agan yang senasib dengan ane, dimana nasib ane yang serba kekurangan modal tapi optimis untuk bisa membuat sebuah rig mining GPU

langkah-langkahnya sebagai berikut :
1. Siapkan PSU yang akan di jumper(ane namakan PSU sekunder)
2. matikan OFF kan PSU
3. siapkan penitik 1 biji, lalu potong bagian pengaitnya atau dengan kabel tembaga bekas sekitar 3 cm, lalu kupas kedua ujung kabel
    https://i.imgur.com/x3wVbK4.jpg
4. colokan penitik tersebut atau kabel temabaga bekas tadi, harus ke kabel warna hijau dan warna hitam (yang terpenting colok satu warna hijau, dan untuk warna hitam bebas colok yang mana saja yang penting warna hitam)
    https://i.imgur.com/Iu68nw0.jpg
    https://i.imgur.com/e9k5YaS.jpg
    https://i.imgur.com/TiE2GBs.jpg
    https://i.imgur.com/Psu7eQt.jpg
5. hidupkan ON kan PSU, jika kipas PSU berputar maka trik penggabungan PSU telah berhasil.  
untuk menghidupkan dan mematikan arus listriknya, pertama PSU sekunder, lalu kedua PSU primer(jangan kebalik ya gan biar lebih efisien kinerja listriknya).

hampir setahun lebih tehnik jumper ini ga bikin masalah pada ke tiga rig ane, mudah-mudahan manfaat trik dari ane ya, ane tunggu kritik, saran, dan jika ada pertanyaan agan-agan.
Penampakan gambar its work gan :

  https://i.imgur.com/Gvsd9eT.jpg
  https://i.imgur.com/uJ54HJ9.jpg
  https://i.imgur.com/ADJ2l7m.jpg

Salam MINER GPU

Atikmdag patcher isn't magic that will instantly be showing your undetected cards. It would be bypassing your driver signature, so the modded cards would be easy to detect by the system. If don't want to patch another feature such as pixel clock etc, just rename it to atikmdag-patcher-bios.exe then only bios signature would be patched. Restart your system, and the system will more easy to detect undetected mod cards.

Of course, will work, your motherboard can load four VGA card at once. Use "riser" as a tool. You can see in google search riser is like what. I think in France many countries are selling it, or by shopping online bro

there are several possibilities if that happens, you can tried it :

1. check the PSU cable for VGA card and power riser.
2. Use Atikmdag - Patcher so that the GPU has been modified BIOS can be read.
Good luck bro

there are two ways of mining namely "Solo Mining" and "Pooled Mining"

Solo mining, that is, in mining Bitcoin done alone, without having to join with mining pool. Mining with solo mining can be said to be more difficult, though, the rewards earned will be much greater.

While pooled mining, is a container of miners who join together with other miners in solving bitcoin algorithm. How to mine together in pooled mining is considered more effective, although later rewards are obtained smaller because in the process of mine done together. Quite a lot of pooled mining can be used as a bitcoin miner:
AntPool 144, F2Pool 130, BitFury 84, BTCC Pool, BW.COM, Slush, KnCMiner, 21 Inc, BitClub Network, Kano CKPool, GHash.IO, Eligius, Solo CKPool, BitMinter, Telco 214, myBTCcoin Pool, mmpool, EclipseMC.

I mean your Over Clock setting and it's has been shown in your screenshot.

4 GB Polaris cards stable on 28,xx MHs it's good enough. Stable more important than raising your Hashrate.

Solving by yourself, Good job!
Report it again after 6-12 hours running and don't forget to share its tune-up setting! That was how a forum works.

The problem with the riser, I often get also .. in the country of Indonesia "PCI-e Riser Lock" no one sell it.
Therefore, I buy a new riser if the problem often happens. haha

hello, my friend
are you sure you bought an ASIC miner?
One more factor that should also be taken into account is the reselling of the mining system if the user later does not need anymore or upgrade. If GPUs can be quickly sold back (used by gamers), ASIC chips specifically designed for mining are more difficult to sell given their particular functionality.

but if you still want to use ASIC miner and try with online shopping services, these tips for fraud prevention steps:
The first step of research. When using a new website to make a purchase, read the reviews and see if other consumers have a positive or negative experience with the site. Make sure the online store you choose has a good reputation. Find the physical address of the store and contact phone contacts. The best way to find trusted sellers is through recommendations from trusted sources.

Define in advance the hardware you want to use for mining. There are four choices namely
1. Smartphone android or apple. (I do not recommend this tool)
2. CPU using PC power processor. (I do not recommend this tool)
3. GPU using VGA card power
4. ASIC.

My opinion is the same as Mr. Geraldo; other options can you tried in "device manager".
1. right click on "Microsoft basic adapter" and "update software driver".
2. "Explore my computer for driver software".

For the next step, do the same as Mr. Geraldo said.

If the coin project is a success, in the roadmap of the country of Indonesia entered the year 2022.
I feel very sad, and if I have to wait for four more years, that's a long time ago. LOL

My opinion, do auto fan if high temperature we add another fan so that the VGA card fan is not easily damaged.
In southeast asia there are only two seasons of a dry season and rainy season, sometimes in very hot weather, I set 100%, depending on the weather situation.

You want to do mining with "cloud mining", surf here https://www.genesis-mining.com/. it's a trustworthy site
I have signed up but have not tried it, because buy mining hasrate is rather expensive for me. hehe

I've never tried mining on mobile android, but I've tried to do it on my computer (CPU) for mining. The mining results in the CPU are not profitable because it depends on the processor, then I quit.
but if you still want to bitcoin mining on android or pc, do it at www.fauchethub.com

I do not advise not to mine wear android and pc, and long-term will break your tool.

hello, my friend tried to do :

1.checking VGA card temperature, if you use afterburner application, RX type usually more than 80C will not run, for that add "power limit".
2.try to do and see the riser power cable, do not charge in one of the PSU, try to share.
I hope your mining machine becomes smooth again.