as the fans are the best noctua industrial, they fit well to controller S5, but they cost too much, despite being the quietest, then there are the Delta, but there are different models, do not buy TFC1212DE, because the controller does not support them, you have to assess well in that area are, if it's hot, and temperatures are high. for fans of the stock of bitmain not even know what brand they are, I only know that they do a lot of noise 74/76 DB,
|
|
|
the fans already have them, but I did not know that the controller can not handle, so I made a bad purchase.
|
|
|
you did a good job, nice, but I have problems to start these damn fan, with S5
|
|
|
I need to talk to someone who has fans, TCF1212DE (DELTA). someone there?
|
|
|
nothing to do, I have nothing more to do, these fans are not compatible with miner S5, if any of you have these fans, TCF1212DE (DELTA) connected directly to the controller S5, can post a photo ?, thank you, so I see the wire colors of the fan, and if you have been reversed. Another question may be a firmware bug last? S5 ?, I do not know what more I have to think, other threads on this fan delta, say the model described above and find none.
|
|
|
give me the link of the discussion please that I do not find. thank you very much
|
|
|
black wire is red, I am in the same position (molex) I reversed only other two cables that have different colors from the original fan bitmain, yellow is blue, originally part of a maximum speed, and slowly lowers speeds, up to die , it stops and will not start. if remit the cables in place the fan runs at full speed without decreasing, virtually noise is too loud.
|
|
|
I have tried everything with my fans DELTA TFC1212DE, nothing to do, perhaps the S5 controller is not compatible, I noticed that if I connect only power the fan runs at full speed 5500 rpm, but too much noise, I tried to reverse the cables from molex, only one sensor, you noticed that part, but then slowly lowers speeds up to die, I do not know what to do, none of you has these fans delta connect directly to the controller S5? and if you work well?
|
|
|
yes i put one of these fans on as second fan in pull. its about the same as the original fan on loudness and air flow.. I substituted with the original, but they will not start
|
|
|
I bent the plastic, but it does not work, if I connect the psu starts at the most, without being able to adjust, but too much noise
|
|
|
It goes all the way, but will not start the same
|
|
|
Bitmain : molex white Delta : molex black
|
|
|
excuse the delay, I speak of the fans who do not start, and a 4-pin fan, when I connect to the controller, the fan does not start, remains firm
|
|
|
guys I need help, I received the Delta TFC1212DE fan, I related to the miner in the controller, and do not start, can anyone help?
|
|
|
I was lucky, I got 4 fan Delta ;DTFC1212DE-SP07 for $ 36 including shipping
|
|
|
|