The newest release on HiveOS is reporting that 2Miners is not an authorized pool so I had to revert back.
What's your launch config?
|
|
|
hi, the miner works great on my AMDs under HiveOS, but my 3060TI LHR in the same RIG only get 35MH/s instead of 44-45% ,some Ideas? --lhr-unlock brings no changes
The LHR unlock only seems to work on the 3060 LHR1, but needs more tuning and testing. We will buy some more test cards and see what we can do later. Note that the lhr unlock is a low power unlock, so you should check the hash/watt. The power decrease is significant. From ~120watt down to ~70watt in lhr-unlock mode. Less heat, improved lifetime of the card. hi, first thanks for the miner, really good, now testing x6 rtx 3090 in flexpool 133mh to 135 best card, only runing --xintensity 512 , less than 2% stales
Normally miners mine on a lower --xintensity on flexpool since the pool doesn't pay for stale shares. But --xintensity 512 might give better speed poolside than the default (284). If not you can try --xintensity 4096 and mine on 2miners.com, nanopool.org, miningpoolhub.com, f2pool.com or other pools that pay for stales.
|
|
|
In attesa da 9 secondi. Premere un tasto per continuare...
The first cuda 11_5 build failed. You need to download it again.
|
|
|
Do you have a screenshot?
|
|
|
Please test the 1.27 build. Gpu timeouts can come when the card is clocked too high
|
|
|
cant run miner even using .bat available in 1.27 folder.
The cuda 11_5 build has been reuploaded. Please try again
|
|
|
Seems that it continues to underreport poolside on flexpool. Any tips?
What happened in the 30minutes your rig wasn't mining? (from 14:30 to 15:00) Change the mining pool and increase the intensity. 2miners.com, miningpoolhub and other pools works good with --xintensity 2048 or --xintensity 4096 Then you get the same poolside speed as in the miner window. More details in the faq I have linked above. v1.27 has also fixed some important pool connect issues, so you should upgrade
|
|
|
Hey what settings yall using for evga xc3 3090s? Cant seem to get it tuned just right.. appreciate the guidance!
Mine on 2miners.com and use --xintensity 4096 The Team Black miner doesn't work so good on low difficulty and low intensity settings. https://github.com/sp-hash/TeamBlackMiner/blob/main/FAQ.md
|
|
|
Try running it with --amd-only
Private farns buy amd cards...
|
|
|
If the external Ip is blocked , why the nvidia rigs are working? All rigs on same ip.
Could be a bug.. v1.25 is working
|
|
|
Tried on 2miners , did it from mobile. Same behaviour, it is not the pool.
Working fine from @iceland pehaps some of your ipadresses are blocked? Did you try nanpool.org?
|
|
|
Or the full one:
Try to add a fixed --xintensity . for the 6800 --xintensity 78. Or you can try --xintensity -1 (default in 1.25) We nerfed the xintensity to 24 on ethermine in v1.26, but it might be too low.
|
|
|
No, it is not working.
Final command - hiveos: -cl-devices [0,1,2,3,4,5,6] --no-cpu --no-verbose Tried w/o --no-cpu too The miner is crashing, if you want the crash file report, let me know
If it is not crashing , I saw a strange curl error, but only once , cannot copy it
You can register a ticket here: https://github.com/sp-hash/TeamBlackMiner/issuesAre your rigs connected through a wifi router? We are blocking proxy servers so you have to connect to the pool directly.
|
|
|
3 rigs, same behaviour, amd only. No problems on nvidia ones Not a problem on TBM 1.25
is it working with --cl-devices [0,1,2,3,4,5,6] ? What's the complete commandline option setting?
|
|
|
For Simplemining No GPU hashrates on dashboard . My config : --algo ethash --hostname eu1.ethermine.org --port 4444 --wallet 0x0000000000000000000000000.$rigName -d --api-port 3333
remove .$rigName and add --worker-name $rigName
|
|
|
More Info about the +20% boost on lhr cards nvidia with lower power? More examples? The --lhr-unlock option is currently under development and might have issues so it's not enabled by default, but you can test it. Set 1 to run the unlock code or 0 for normal mode. The unlocker is developed for the latest driver (496.76) in windows cuda 11.5, but should work on older drivers and in linux as well. First run tbminer --list-devices to get the cuda index needed. Then unlock the cards like this: device0: gtx 1060 device1: gtx 3060 device2: gtx 3060 device3: gtx 1060 device4: gtx 1060 device5: gtx 1060 --lhr-unlock [0,1,1,0,0,0]
|
|
|
hi i have a problem with the miner where the stats are not reporting. (eg. power, temps). only hashrate and average hashrate is reported. do i need to add additional command to the bat file?
AMD or NVIDIA? For AMD on windows we use an old lib that doesn't work so good with the new cards yet.
|
|
|
|