the too risky to your laptop although using the GPU external, other parts on the laptop can overheat such Processor, Try to hold the keyboard certainly feels a bit hot and the fan rotation that feels heavy even the sound of the fan exit.usually, if laptop overheats will crash or restart itself can even become damaged

everybody has the definition 'soon' is different. maybe 'soon' is tomorrow, maybe 1 week later, 1 month later, 1 year or 2,3,4 year later or the ETH never to be Pos. You can calculate own from current Dag Size, how many ETH when released and how many current amount ETH. But ETH issue from POW to POS only to be news consumption. In fact, doesn't somebody know when the ETH coins to be POS except only those involved in the creation and development of ETH.

When you using Window10 then when have a problem, you can read this forum, a lot give the solution based their experience using Window10. ex: Windows has tools such HWinfo, that can tell precisely if your GPU is working properly or no.

Yes, absolute agree in melted cable case. It depends on cable quality since there is no Wattage for each cable only Max Voltage and Current. If you read carefully what I say before, my point is How to powering Riser with the same condition when we mounting cards direct to mobos.

When we mounting a card directly to Pciex16 on mobos, that socket will produce Max 75W. So, a Riser powered by Molex or 6 Pins will give the same condition. that what I mean with safer.

This is about safer, not about right or wrong. All of GPUs need to mounted to PCIe 16x that can produce max 75 Watt (on mobo). When we are using "powered riser", we need to make sure that riser will produce the same wattage (max 75 Watt). So we need to make the same condition on it. Since SATA can only produce max 55 Watt (depends on wire rating) and Molex can produce max 75 Watt, so safer using Molex or 6 pins for powering Riser.

I also using SATA connector in a few riser, I think PCIe 1x to USB in riser will produce same as PCIe 1x socket on Mobos (25 Watt max), but I never try to measure it. That's why people said safer using MOLEX or 6 pins than SATA.

So you are planning on using Y splitter 8 to 2x6 pin, it's enough to power your riser. But your PSU only has 4 PCIe 8 pin, right? You could use a riser with a Molex connector, so you can powering your riser directly from PSU using Molex connector or else use 6 pin riser with Molex to 6 pin power. Will safer than using SATA connectors.

0.013% from 7.19 Th/s, it means you have around 930-950 Mh/s Hashrate, around 31-35 card, right? I suggest you don't do solo mining in ETC, a Network Hashrate, and Difficulty too high for your Hashing Power. If you want solo mining with your Rig, find other coins.

It will be causing your system isn't stable, every Bios has different versions. the best way to modification your bios cards is using the original bios of your cards. Backup your bios card, duplicate it. Use one of them for modification. PBE 1.6.x with one click auto copy strap would help you.

Hey dude,

yes, you can mine BTC / ETH using Laptop, but you will get nothing because you need to beat a ton of ASIC miners and GPUs Rig.

and most laptops to be produced just for writing, reading, watching the movies and some games, not for mining.

because the mining process requires a device running 24/7 and then the device produces heat. while a laptop will not be able to remove the heat

generated from the process.even if your laptop is stored in Refrigerator or you are in the is on the continent of Arctic though.

Is:
1. The coins if convert to BTC/USD more bigger from your electricity bill.

2. The Pool attracts small fees.

3. Network Diff the low and the reward/block or reward/hashrate share is high.

4. Hashrate your GPU the determine your rewards.

by the way, do you have the GPUs?

No matter what, in mining industries, GPUs is our asset. so we need to make sure our asset always in good condition if we plan for along term. if we truly calculate OPs HW, I think power draw would be around 650-700 Watt on a default setting.

it's mining we need to run our Rig 24/7. So, I guarantee only using more power space would keep our asset safer. Hashrate per Watt is important, but the most important thing is to make sure our Cards has enough power.

Yes, that's why I use safer calculated, also with how much power that motherboards needed.

I never use software calculation about power consumption, it will give more gap between what shown on a software and the real (at Wall), trust me.

I always calculate max power draw for each part.

yeah, but I never found even at old computer that has 100 Watt PSU. It's called safer.

but isn't safe and will kill your cards slowly

still, need power because Riser needs power max 75W both Molex or 6 pins.


Every time I want to build a Rig, I always calculate a standard GPU that needs Powering because my rig is stable and rarely problematic. (Yes, I know if doing it with undervolt total powering is not same.)

This's safer calculate.

1070 has a TDP of 150 W x 3 = 450 W
1060 has a TDP of 120 W x 1 = 120 W
total = GPU requires 570 Watt power then 750 W - 570 w = 180 W remaining power. Not to mention SSD, RAM, RISER  that has not been calculated yet.

So 750 W, not enough

Also activated unlock voltage monitoring then go to AB main directory find MSIAfterbuner, it's CFG file, then open it on a notepad.

1. Find UnofficialOverclockingEULA change it to UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it.

2. Find this text UnofficialOverclockingMode change it  to UnofficialOverclockingMode = 1 and save it.

3. Change Registry HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}

4. You need to check all 4 digits folders (0000,0001, and so on.) modifying all that have Enable ULPS by default value data is 1, change it to 0 then reboot your system.

you can under-volt it directly using PBE but too risky need experience on it. if you're using AB make sure activate unlock voltage control on AB general setting. I suggest using AB version 4.

Do Mod bios if you're using  PBE 1.6.2 it will copy your strap 1750 to above (1750 more stable)

 if PBE1.6.6 will copy your strap 1500 to above.  Use your original BIOS backup for safer.

Note: Using crimson relive blockchain driver it will fix Dag epoch fixed also patch your signature using ati pixel clock patcher/atikmad patcher.

I mining in Ethermine : https://ethermine.org/

that's very...very fantasy high class. you're the best miners dude.your fantasy beat Albert Einstein and Satoshi Nakamoto. good luck dude

This's Crimson Relive : http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx. will fix Dag epoch.

I didn't have experience with the last version of The PBE, so far as I know and based on experience hynix and samsung chips stable with copying 1750 to above. so I suggest to using 1.6.2. you can patch driver signature using atikmdag patcher.

Are you buy will 2 Riser and you use PCIex16 directly your other GPUs?. if you do it directly your GPUs to PCIex16 it's very not safe.

RX580 has TDP 185W x 8  = 1,480 W

RAM normal 2-4 W, peak 10 W Conditions

Celeron 51 W (Series G)

SSD :  2 W

Molex, 6 pin connector (if you're using Riser) or PCIex16 board will need supply max 75 W with or without Riser. 8 x 75w = 600W

total need Power Consumption = 2143 W. it's safer calculation.

in fact, under-volting will decrease wattage of your Cards but it's not safe for the long term if you give small power space for your cards and other parts also.

I still profit after calculated electricity bill and still save my profit in the wallet. still can buy GPU 2 pieces/month. profit or no depending your financial Management .when to sell coins, when to hold the coin. and when to switch coins manually. and depending on your management maintenance Rig. Good management of maintenance very influences to your profit.