Open your eyes and don't be fooled, this project will not go anywhere like the first three from which he cloned the concept of this coin, don't fall for a false hope and broken promises even if didn't cost you money it will definitely waste your time.
probably but checking a thread once a week isn't much time wasted |
|
|
|
I just wanted to make it clear that MOJOv3 has been taken over by what you may call 'The Mojocoin Group' for further development. MOJOv3 has proved to be a very stable wallet and blockchain and work is going on behind the scenes. There will not be many updates yet. I guess that this will improve as soon as a proper roadmap has been worked out and a new website set up by the new group.
Me, EBK1000, is no longer working on this project as we are working on a new project. MOJOv3 is alive but as they have stated before, updates will be few and far between and progress will be slow but secure. I Noticed that people were moaning on the old Mojo Slack channel so I deleted this channel as it no longer serves any useful purpose. The new 'owners' of MOJOv3 will surely be back with updates at some point in the near future. This will be my last input on the matter as we are working on something else.
considering how you handled this project people would be insane to invest in another one of your projects |
|
|
|
Hi, The wallet in Yobit.net exchange is in maintenance status. I sent to Yobit team an email and the answer is the following: "Deposit\Withdrawal coin will be available after you upgrade the source code of the wallet. Unfortunately, the developers are in no hurry to send you updates - therefore, in order to avoid the loss of users, the network is not available. If you have updated the source code of the coin, send us ( https://yobit.net/en/maintenance_request/ Free)and we will promptly correct the problem on the coin. Thank you for contacted the support." Is there any chance to sent the code to Yobit and upgrade the source code? Thanks the source code is publicly available on github. what's stopping them from going to github?? this is a lame excuse from yobit |
|
|
|
I did everything, but no one swapped my coins yet. How long will be the swap needed? Greetz Steve mine took about 12 hours I deposited before bed and could withdraw the following morning |
|
|
|
Thank you so much! And... How do you know if own MasterNode works correctly? I'm trying to implement it but I have some doubts... when you start the masternode in the debug window it should say "successfully started masternode" then check the renosnodes tab and search for your ip Thank you. If I start my RenosNode a window appears: "Error: could not allocate vin for corrateralAddress". What does it mean? Do you unlock the wallet? Yes, it is unlock. The behavior is equal to whether it is my file renos.conf whether it is not there (I tried to remove it and it does not change anything, as it does not exist). WHAT IS "vin"? just a guess but your original masternode input (30,000) dont unlock your wallet you don't want to or your input may split upon staking you should have created a new address, transferred 30,000 to it in one transaction,while waiting for confirms set rules on your firewall, add ip and port information to conf, add masternode key to conf, restart client, open debug window type masternode start ******* where ***** is your wallet passcode |
|
|
|
Thank you so much! And... How do you know if own MasterNode works correctly? I'm trying to implement it but I have some doubts... when you start the masternode in the debug window it should say "successfully started masternode" then check the renosnodes tab and search for your ip ...
The wallet opens but there is 0 connection and won't sync.
I have uninstalled and re-installed the wallet but same thing happens.
did you run the v1 wallet previously? if so try deleting the contents of your appdata/roaming/renos folder (make sure you have a backup of wallet.dat just in case) and try again. if that doesn't work or you never used the v1 wallet open your conf file and add nodes |
|
|
|
when does renos come back on crytopia ?
Might buy some before it becomes too expensive.
It 'll probably be the big rush to get some renos when masternodes are available
 masternodes are available, my client tells me there are currently 39 active  |
|
|
|
linux build error src/key.cpp:17:23: fatal error: secp256k1.h: No such file or directory
compilation terminated.
Makefile:2417: recipe for target 'build/key.o' failed
make: *** [build/key.o] Error 1
any advice or binaries? built and installed secp256k1 now getting this: ... could really do with a binary got it: git clone https://github.com/RenosCoin/RenosCoin/releases/tag/v2.0.1.1
cd RenosCoin/src/secp256k1
chmod +x autogen.sh
./autogen.sh
./configure
make
sudo make install
cd ../../
chmod +x src/leveldb/build_detect_platform
qmake
make
the new wallet windows qt is not working...
windows wallet fine here if it crashed straight after opening just try opening it again |
|
|
|
linux build error src/key.cpp:17:23: fatal error: secp256k1.h: No such file or directory
compilation terminated.
Makefile:2417: recipe for target 'build/key.o' failed
make: *** [build/key.o] Error 1
any advice or binaries? built and installed secp256k1 now getting this:  could really do with a binary |
|
|
|
linux build error src/key.cpp:17:23: fatal error: secp256k1.h: No such file or directory
compilation terminated.
Makefile:2417: recipe for target 'build/key.o' failed
make: *** [build/key.o] Error 1
any advice or binaries? |
|
|
|
I want to deposit 1337 to cryptopia but it says wallet maintenance and no deposit or withdrawal allowed. I was reading about how when they take a coin off they freeze the wallet. if not how long could my wallet be frozen if anyone knows?
its been like that since this morning, they'll pull their fingers outta their bum soon. Novaexchange is still ok (i think) @Mike_07
Whats the added value of w00t?
Also: if i swap my 1337 for w00t, can i swap w00t back to 1337? if not, dev team tries to get 51%+ of the coins this way...theyll hope everyone swap 1337 for w00t.
I want specifics!
----
w00t still under development, dev said that specifics will be soon. once w00t will be listed on exchange sites you can swap w00t for any altcoin you want and you will be able to buy w00t with other altcoins not only 1337.
when did that change? it didnt changed, once w00t is on the exchange sites everyone can buy it from the exchange site with btc and i`m sure that ltc and doge market will be also available. after the swap it will be like any other regular coin, hopefully a high value one.  sorry mate I misread your post thought you'd said you could use btc or any alts for the original ico, I really should stop smoking while I'm here. on a different note just built the new wallet for my linux box no problems to report, 5 connections atm & successfully staked |
|
|
|
I want to deposit 1337 to cryptopia but it says wallet maintenance and no deposit or withdrawal allowed. I was reading about how when they take a coin off they freeze the wallet. if not how long could my wallet be frozen if anyone knows?
its been like that since this morning, they'll pull their fingers outta their bum soon. Novaexchange is still ok (i think) @Mike_07
Whats the added value of w00t?
Also: if i swap my 1337 for w00t, can i swap w00t back to 1337? if not, dev team tries to get 51%+ of the coins this way...theyll hope everyone swap 1337 for w00t.
I want specifics!
----
w00t still under development, dev said that specifics will be soon. once w00t will be listed on exchange sites you can swap w00t for any altcoin you want and you will be able to buy w00t with other altcoins not only 1337.
when did that change? |
|
|
|
...
Where I find my file Roaming / 1337 I downloaded the wallet plus one has no file with it
windows - open file explorer and type %appdata% in the address bar if there isn't a folder there called 1337 create it and follow previous instructions Linux - ~/.1337 I'd highly recommend downloading the chain over syncing from scratch |
|
|
|
Poswallet are delisting us guys  withdraw your coins before the 17thcan someone help me? my wallet always shows out of sync with the 1337 ....
what os are you running? |
|
|
|
Thanks guys for nominating me for the signature campaign manager however I wouldn't even know where to start but I can look for a manager for 1337 coin if you like. And also some one who can design the signatures for 1337 coin.
Pay rates could be:
Jr Member-250,000 1337 coins/week
Member-500,000 1337 coins/week
Full member- 1 million coins/week
Sr member- 2.5 million coins/week
Hero+- 5 million coins/week
Must make 25 posts per week and 1 post must be in this thread supporting the 1337 coin project. Posts must be constructive and on topic 50 characters minimum.
Twitter campaign can go along the same pay rates however it depends on how many followers. Maybe make it that someone would need a minimum of 250 followers to join. People must at least tweet once a week about 1337 coin and also re-tweet 5 tweets per week.
250 - 500 followers - 50,000 coins/week
501 - 1000 followers - 100,000 coins/week
1001 - 2000 followers - 250,000 coins/week
2001 - 5000 followers - 500,000 coins/week
5000+ followers - 1 million coins/week
What does everyone think about the pay rates for the campaigns and is there enough promotional funds for this to run at least 2 - 4 weeks?
firstly Congrats on community manager I see you're not overly confident but even if you only fill the position temporarily you should give it a go, we're here to help if you need it pay rates way too high imo, I'd go more: Jr Member-25,000 coins/week Member-50,000 coins/week Full member- 75,000 coins/week Sr member- 100,000 coins/week Hero+- 150,000 coins/week as for twitter paying per tweet might be better 250 - 500 followers - 500 coins/tweet 501 - 1000 followers - 1000 coins/tweet 1001 - 2000 followers - 1500 coins/tweet 2001 - 5000 followers - 2000 coins/tweet 5000+ followers - 2500 coins/tweet I'd also instigate some rules such as a weekly cap, including a certain link/hashtag/image etc |
|
|
|
Hm, that is one project I am going to watch. Wonder what comes out of it.
the post directly above yours is quite intelligent ... ...
LOL, basically you copied the source from another coin and renamed it, or used some coin cloning service.
You just got busted. Time for you to create another new coin weeks from now to try and scam newbies yet again.
Final Verdict : This one beats the rest for not even trying. Shit coin, no unique features, avoid.
|
|
|
|
can we get velvets confirmation on this?
|
|
|
|
...
Hi Sir, thanks for the response.. i tried to type in console the setstakespilttreshold 5000000 but it says method not found (code-32601).. what does it mean sir? Thanks a lot
small typo there mate it should be setstake splitthreshold not setstake spilttreshold ...
so basically if i want to stake more i should write amount that is much bigger than the amount of coins i have and than the blocks will never be split and i will get more staking? so if i have 10 million i should write at the debug window 20 million?
also can i send all my coins to my self? i mean send them from my wallet address to the same wallet address and than all coins will be at the same block?
thanks.
correct that way all your coins will stake each time you get a block if you set it to 10,000,000 it will split when your input reaches 20,000,000, I have mine set to split at 8,000,000 giving me inputs of 4,000,000 but I have some inputs that haven't staked for a few days. I need to start a new wallet soon anyway as I'm over 3k transactions again so that will be set to 10/20 million split yea you can send your coins back to yourself, use coin control to select the inputs in the current address and send them. if you haven't enabled coin control its easy to find settings>options>display then check the last checkbox (Display coin control features (experts only)) ignore the "experts only" it's simple really imho everyone should enable coin control on every coin that supports it |
|
|
|
...
what is split threshold? how it affect staking? and how do i do it?
thanks!
...
what is split threshold? how it affect staking? and how do i do it? thanks! [/quote] sorry for the late reply guys its been an awkward couple of days stake split threshold allows you to control the size you're inputs split at. with pos coins your input creates a block and gives 2 outputs equal to half the input & pos reward each, this means with each successful stake your blocks get smaller eventually they may reach a size where they dont stake or take ages too. the weight is cumulative so its not that bad but you could end up with an input that doesn't stake for months. to use it open the debug console and type: setstakesplitthreshold 5000000 replace 5000000 with whatever size you want your inputs to split to and the inputs will only split when the inputs reach the correct size to give you 2 outputs greater than your split threshold |
|
|
|
my wallet is working and synced and i withdraw all my coins from poswallet. now i`m read to stake coins every 2 hours!
i will also see if i`m getting better results than what i`ve earned at poswallet.
Great to hear mate and good luck with staking 1337 coin. 2 hours is pretty good to earn some 1337 coins from staking. Please keep us updated on how you go with this as I have a lot of my coins on Cryptopia at the moment as I withdrew from POSWallet as they are delisting a lot of their coins now. got my first stake: 22,279 coins (which worth about 8,700 satoshi) and it took 9 hours. yesterday for the same amount of coins i staked at poswallet for 9 hours and i got only 12,681 coins. so basically i dont need them  don't forget to set a split threshold or you'll end up with smaller inputs  |
|
|
|
|
Show Posts
