have new wallet and add the new nodes... hope this will work... tq guys for your work in this coin...
sync 4563... cheers...
i don't know if it really matters but please use also listen=0 in conf and connect to those 2 ip only. that reduce chance of forking i think. tq bro... if we use original wallet and just change the node... is it working? Nope, you have to resync
|
|
|
the node with that checkpoint key is running full now so if you make sure 91.121.6.19 is in conf you should be able to stay on right chain after resync. ( according to original dev)
Still forked. I just resynced with that node only and I already have 7 blocks in like 30 seconds. but you are on the same block as the explorer? oke my test on chain forks me off again also I wonder who is rolling the explorer without error, block on explorer keep increase correctly (if we choose it is correct one)? I believe it is luck. I can resync with the explorer but if I start to stake it is a matter of time before I fork. This is why I said before I believe it forks when the wallet finds a block at the same time as the network so instead of orphaning the block and rejoining the network it forks. You can get onesy twosy blocks this way if you don't mind babysitting the wallet all day and resyncing over and over. This is probably what is happening. I suppose if you had enough weight and you did that you could drive the chain forward with a lot of blocks for yourself. Maybe someone is doing that? Not really, it's wallet weakness after block 40k. I totally agree with you about there is no orphaning check and every wallet went to wrong way. But I don't think if someone has enough weight can drive chain forward for himself, more weight, more chance to wrong chain.
|
|
|
the node with that checkpoint key is running full now so if you make sure 91.121.6.19 is in conf you should be able to stay on right chain after resync. ( according to original dev)
Still forked. I just resynced with that node only and I already have 7 blocks in like 30 seconds. but you are on the same block as the explorer? oke my test on chain forks me off again also I wonder who is rolling the explorer without error, block on explorer keep increase correctly (if we choose it is correct one)?
|
|
|
the node with that checkpoint key is running full now so if you make sure 91.121.6.19 is in conf you should be able to stay on right chain after resync. ( according to original dev)
Still forked. I just resynced with that node only and I already have 7 blocks in like 30 seconds. but you are on the same block as the explorer? Still no orphan check. I've synced up with MinerFTW nodes, have 2 block stake successfully, then became fork again, next blocks do not appear on explorer
|
|
|
Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.
does it tell you that its corrupt? does it start while the wallet.dat is in there? or does it give you an error? It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect. mellon, if you trust me, you can send corrupt wallet.dat to me then I will try dump on my PC. Will be at work 1h from now. You can pm me for details what need to do and I'm here promise to send you back 5% of my balance for your attention if it's would take effect. Sent you in PM. Will be back after 1 hour
|
|
|
Ok,if all is fine Dev tell me how me salvage my wallet.dat? It's corrupt on forked chain when I'm not do "dumpprivatekey" command. How its can be back up now? I need help here.
does it tell you that its corrupt? does it start while the wallet.dat is in there? or does it give you an error? It's on start tell that it corrupt and cannot salvage it. After restart with new wallet.dat file my current wallet.dat changed to wallet.12467874.bak and its same situation with all copies of my address on few OS. Command from prompt "Salvagewallet" and rescan not take any positive effect. mellon, if you trust me, you can send corrupt wallet.dat to me then I will try to dump on my PC. Will be at work 1h from now.
|
|
|
i will run the node on my server for you. hit me up the stuff and i will turn it online if that fix this mess.
Alright You will need to put the checkpointing private key in the .conf file. like this checkpointkey=pirvatekeygoeshere and i will need to put the ip address of the node in the source and on the ANN Can the checkpointing demon run on multi node? If yes, give me one demon for Windows, I have 24/7 sever.
|
|
|
It looks like if the wallet stakes a block at the same time as another block on the network it stays on the chain containing the block it staked even if that block should have orphaned. Instead of properly orphaning the block and moving back to the longest chain (as it did prior to block 40k) it never orphans its own blocks and just forks instead.
Yes, I think so too, after block 40k, no orphan block check as it did before.
|
|
|
you can add this addnode also 198.105.125.233 i'll make some more
Your node does not work. And that seems my wallet get trouble again. I updated the fixed version, but after an hour smoothly working, it began generate wrong chain with explorer (staked but cannot found on explorer, in history, not showed orphaned). I am trying to re-sync data again.
|
|
|
ok fixed. download wallet again from the ANN and delete EVERYTHING except wallet.dat delete the .conf file too close wallet, let the %appdata% litedoge folder only have your wallet.dat and nothing else at all(delete all the rest)!! then download new wallet and sync then after you are synced and you check block explorer to see if you are on the same block then after that stake.
d57heinz, please don't stake. you have alot of coins and alot of weight split them up onto different computers atleast before you stake thanks
this was a very simple problem that got fixed now. if i was here a few days ago i could have fixed it in the same day. but i was not here. i didn't even know of the fork until today when i logged in. i am very sorry for this. i really am. i hope you forgive.
Can I close my wallet and update new now? you luongdk don't need to. thanks alot for helping today. d57heinz, maybe you should divide your 25mil bounty to me also , lol
|
|
|
Hey from alcurex.
I see our ldoge wallet lost network connections. What nodes I should use? thanks.
halibit alcurEX exchange
you can use following nodes addnode=183.91.4.3 addnode=213.154.232.2
|
|
|
you can add this addnode also 198.105.125.233 i'll make some more
Someone is asking me about the source update, dev, where you put the source to?
|
|
|
ok fixed. download wallet again from the ANN and delete EVERYTHING except wallet.dat delete the .conf file too close wallet, let the %appdata% litedoge folder only have your wallet.dat and nothing else at all(delete all the rest)!! then download new wallet and sync then after you are synced and you check block explorer to see if you are on the same block then after that stake.
d57heinz, please don't stake. you have alot of coins and alot of weight split them up onto different computers atleast before you stake thanks
this was a very simple problem that got fixed now. if i was here a few days ago i could have fixed it in the same day. but i was not here. i didn't even know of the fork until today when i logged in. i am very sorry for this. i really am. i hope you forgive.
Can I close my wallet and update new now? you luongdk don't need to. You mean I don't need to update wallet? And another thing, please contact Bittrex to update their wallet. Thank you.
|
|
|
ok fixed. download wallet again from the ANN and delete EVERYTHING except wallet.dat delete the .conf file too close wallet, let the %appdata% litedoge folder only have your wallet.dat and nothing else at all(delete all the rest)!! then download new wallet and sync then after you are synced and you check block explorer to see if you are on the same block then after that stake.
d57heinz, please don't stake. you have alot of coins and alot of weight split them up onto different computers atleast before you stake thanks
this was a very simple problem that got fixed now. if i was here a few days ago i could have fixed it in the same day. but i was not here. i didn't even know of the fork until today when i logged in. i am very sorry for this. i really am. i hope you forgive.
Can I close my wallet and update new now?
|
|
|
Plan: I am syncing my node to luongdk's vps Will make a hardcoded checkpoint in the code Will compile the wallet with the hardcoded checkpoints Everyone downloads the new wallet after i am done and completely resyncs their chain
What block you put the checkpoint to? Someone is still staking and generated new blocks to my wallet and sync to explorer. You are still on the same block as the explorer right? Yes, I am. But someone still rolling my wallet and explorer. As long as you are on the same block as the explorer its ok Ok, let that guy got lucky coins, I will keep my wallet locked until new wallet released. Yes but keep it alive, like open but locked. so i can sync from it Sure
|
|
|
Plan: I am syncing my node to luongdk's vps Will make a hardcoded checkpoint in the code Will compile the wallet with the hardcoded checkpoints Everyone downloads the new wallet after i am done and completely resyncs their chain
What block you put the checkpoint to? Someone is still staking and generated new blocks to my wallet and sync to explorer. You are still on the same block as the explorer right? Yes, I am. But someone still rolling my wallet and explorer. As long as you are on the same block as the explorer its ok Ok, let that guy got lucky coins, I will keep my wallet locked until new wallet released.
|
|
|
Plan: I am syncing my node to luongdk's vps Will make a hardcoded checkpoint in the code Will compile the wallet with the hardcoded checkpoints Everyone downloads the new wallet after i am done and completely resyncs their chain
What block you put the checkpoint to? Someone is still staking and generated new blocks to my wallet and sync to explorer. You are still on the same block as the explorer right? Yes, I am. But someone still rolling my wallet and explorer.
|
|
|
Plan: I am syncing my node to luongdk's vps Will make a hardcoded checkpoint in the code Will compile the wallet with the hardcoded checkpoints Everyone downloads the new wallet after i am done and completely resyncs their chain
What block you put the checkpoint to? Someone is still staking and generated new blocks to my wallet and sync to explorer.
|
|
|
First d57heinz stop staking.
Also i need to know who has the chain with the most blocks.
You can use mine, I am have correct sync with Explorer My node is 183.91.4.3:17014
|
|
|
i took explorer version as guide point. it is working and not hanging how i changed code and staking working like it should be.
i hope dev want to stay on same chain also. otherwise we fixed nothing
Can you help me with my wallet.dat situation? I can help you, but cannot do it right now because I am at home. I will be at work about 11 hours from now.
|
|
|
|