Ckovivas - Thanks for the firmware and latest cgminer update!
Is there a way to get the fans to run at maximum on the avalons.
I have tried adding these:
--avalon-temp 0
--avalon-temp 1
--avalon-temp 30
But none are running at 4000 so the temperature is running several degrees more than normal. I tried this on a couple different units.
? They're defaulted to max on his firmware. |
|
|
|
dogie_avalon1 84,906.73 MH/s 471424 (99.62%) 1792 / 0 / 0 0:00:0 Unit seems to be running well @ 350MHz  Obviously can't promise this performance as the unit is rated at 66GH but its up to the buyer what speed they want to run at. I'll load whatever firmware the buyer wants before shipping. |
|
|
|
why are you all sleeping next to your hardware? ever tried earplugs?  ? I'm in student halls, I'm literally 60cm away from these fans. IN ORDER TO HEAR MYSELF THINK I NEED TO TYPE IN CAPITALS. Hear ye hear ye, btc network be secured from within the confines of the student housing. 4000 rpms in your ears is like being on a transoceanic flight, all hours. I CAN'T HEAR YOU BRO |
|
|
|
why are you all sleeping next to your hardware? ever tried earplugs? ? I'm in student halls, I'm literally 60cm away from these fans. IN ORDER TO HEAR MYSELF THINK I NEED TO TYPE IN CAPITALS. |
|
|
|
Is someone able to compile the same firmware but with variable fan speed please? Temps are 42 and 46 [I only have external air being piped to one intake at the moment so can make the 46 lower]. I need to sleep next to this thing and 4k rpms don't exactly help  |
|
|
|
|
Is there a way to set max temp to 48/49? One of the modules sits on 47 which triggers max RPMs.
Also those of you running upright, do you have the PSU at the top or the bottom?
|
|
|
|
This is the best printer I could find for the money http://www.punchtec.com/It's the Ord Bot Hadron. Very fast. I can print an entire AR lower at .2mm resolution in 8 hours, at 200mm/s. I can print with nylon as well, since the extruder is not lined. Its also quite large and expensive for FDM/ME. Remember that increased speed = decreased accuracy, regardless of what the max resolution is, and running at a better resolution = increased time. 3DP is all about tradeoffs. If everything else was equal, yes. If you want to compare screw driven, flimsy repraps to linear bearings and rigid frames... it's another story. It is not considerably larger or smaller than any other 200x200mm printable area model... and compared to anything else that's assembled and ready to print, it's not expensive. I wasn't interested in building a printer, I was interested in printing. I get great looking, dimensionally accurate parts. The only problems I've had have been with the QU-BD extruder. Its not about the bearings and frames, honestly. When you really look at the engineering of it, there are so many forces going on within the polymer melt. As you increase the speeds, the cyclindrical melt acts and deposits very differently. |
|
|
|
|
More efficient on powering, but at the same time its only giving you +3 usbs. That's quite an overhead. Good for stacking as well.
Note the picture is the link.
|
|
|
|
185btc per device- want to buy both
My apologies, I said two offers but that means an offer from two different people and NOT two different units. Although I have 2 batch 2 units, only 1 is in hand and the other might be a week or so out. |
|
|
|
|
I have two offers at 180btc. I will likely be accepting these offers tonight if they are not beaten.
|
|
|
|
|
Is anyone able to compile a firmware where the fans still throttle, or a way to change that manually? I need to sleep next to this thing.
Also a way to set max temp to 48/49? One of the modules sits on 47 which triggers max RPMs, although I can hopefully move this to somewhere a bit cooler.
|
|
|
|
Mr blurrycam:   Sorry, my backup phone camera sucks so much. |
|
|
|
|
Just walked a mile with the box, give me 30 mins.
|
|
|
|
This is the lowest possible - it will not go down anymore. price drop: 6 BITCOINS! How can we trust anything you say? (joking) |
|
|
|
LMFAO. Predicting 6 billion, because that makes any sense the last 12 cycles have been 17% every 11days. even with a low 10% every 11days. you'll hit 1billion sept 28'2014 considering all the chips being shipped, BFL having 11xxx pre orders alone. and knc coming out with 350g/hash machines this is not at all unbelievable. https://docs.google.com/spreadsheet/ccc?key=0AmXn4BnLUgYsdEF0TUtWUWtUaUUzR1F2aUhEWW9lN2c#gid=0disregarding cost of electricity, pool fee, and unforeseen downtime. @ 70g/hash you can expect to earn 216BTC over the lifetime of that machine. if you mine TODAY. it gets worse if you put in a more reasonable difficulty figure like 15%. Explain to me where the 75,000TH is coming when none of it is profitable? Ah yes, you're talking bullshit. it'll take 3579.13941333TH to get to 500million difficulty, at that point you'll earn 0.07btc a day at the very rosy 10% every 11days. again minus all the pool, electric, blackouts etc. thats. 7000, BFL 500g/hash machines @ 22500, or 9941 Jupiters @ 7k each, or 30000 bitfury 120g/hash machines @ 2160. or, a combination of these, you don't think we'll see this many machines come out? this doesn't take into account the BFL and avalon chips for diy boards edit, where did you get the 75000 theta has number from? https://en.bitcoin.it/wiki/Difficulty#What_network_hash_rate_results_in_a_given_difficulty.3Fbillion difficulty should be about 7100TH edit, and the fact that we're already 140TH in. i'd appreciate it if you wouldn't be so disrespectful, i'm only bringing the facts to light, no need to get defensive. Because you're just fucking wrong. You predicted 5 billion, not 500m. Lets not go back on that now shall we? If you can find buyers for 25000 mini rigs, I think BFL wants to talk to you. Especially since non of them will ever pay for themselves it seems. |
|
|
|
|
REALLY. So you spent 3000000000000000000000000 posts explaining a ridiculous auction system, ran it over 6 weeks while holding other bidders funds 'in case they win', and now you're simply buying them back?
|
|
|
|
|
...Haven't you already sold this, several times?
|
|
|
|
|
Here comes the boom (goxed).
|
|
|
|
|
Would people prefer me to add a BIN?
|
|
|
|
LMFAO. Predicting 6 billion, because that makes any sense the last 12 cycles have been 17% every 11days. even with a low 10% every 11days. you'll hit 1billion sept 28'2014 considering all the chips being shipped, BFL having 11xxx pre orders alone. and knc coming out with 350g/hash machines this is not at all unbelievable. https://docs.google.com/spreadsheet/ccc?key=0AmXn4BnLUgYsdEF0TUtWUWtUaUUzR1F2aUhEWW9lN2c#gid=0disregarding cost of electricity, pool fee, and unforeseen downtime. @ 70g/hash you can expect to earn 216BTC over the lifetime of that machine. if you mine TODAY. it gets worse if you put in a more reasonable difficulty figure like 15%. Explain to me where the 75,000TH is coming when none of it is profitable? Ah yes, you're talking bullshit. |
|
|
|
|
Show Posts
