ok I have changed it

what would have showed as

10.9 before

will show  10.932

as long as the 16 characters are not full then it will do 10.9

It's by design so that it stays centered. Just dropping the least significant character.

10.93

Would show as 10.9

Same thing will happen to BTC if it breaks 1000

You cant set the exchange it uses the average from all the sources at cryptofolio. This was done to keep it simple, and it allows for good prices if one of the exchanges goes down ( if a price is older then 11 mins I exclude from average)

This is the actual production endpoint, have a play.

http://cryptofolio.info/api/screen/?@Code=USD&@SecondLine=ETH

I wont stop you from creating your own endpoint that meets your requirments. Though you will need to change the LUA code in the device slightly to call your server.

Note if you set second line to BTC it forces USD on the second line allowing you to change the top to CNY or EUR like:

http://cryptofolio.info/api/screen/?@Code=CNY&@SecondLine=BTC

added exchange https://yobit.net

Glad people are receiving them

Had my first OB sale last night

New exchange added  https://www.ccedk.com/

new coins added for the week:

GSMCoin GSM Votes:199
BlockShares BKS Votes:174


I would also like to add the https://yobit.net exchange but there API is more clunky to implement, I have emailed them asking for a better API call.

store is now listed on OpenBazaar

0a7ec697900ee76102428e27fe45c5ab3bed23b5

thanks

Turkey was actually the first place I shipped to, I charge a flat rate 17.50 USD for up to 3 devices.



EDIT: DOGE and MINT and a few others should work now the mUSD mAUD mEUR means its under 1 cent similar to mBTC

Hope everything is going smoothly

Just letting people know we're back in stock on the website.

Thanks

"Vires in Numeris" = "Strength in Numbers"

Edit: thought this was the last post didn't see the exta page

To turn off the backlight unplug the little black plug on the left side.

There is always a web interface, if you want it acessable over the Internet you will have to portfowrd  it in your router.

(When it boots it says it's IP)

Shipping is flat 17.50 USD for up to 3 devices


WIFI standard: 2.4 Ghz - b/g/n
 Dimensions: 129mm x 51mm x 40mm (W x H x D)
 Power Socket: Micro USB (like android phone)
 Power adaptor/cable not included
 Less than 1 Watt at the wall
 Code Avaliable on request

 Assembled in Australia

yep

I implemented backlight mode first but found it too distracting while watching TV.

Most of the device patches have been for the setup page when using Safari on iPhone/iPad.

oh and the first one made the altcoin configurable, fairly obvious if you have this or not because of altcoin box in the setup page.

Glad people are getting there devices.
I will look at making some changes to the API this weekend.


I have started building the next batch, the email to the people waiting in the queue will happen in the next few days.

Its there now, solidcoin has been removed.

Cant have two coins with the code SC

I did do some testing on battery with something like this

I was only getting 7 hours, perhaps because it was a old battery pack.

Have the notification mode set to stars on battery, when the battery is flat the WiFi is the first to go and it gets stuck on a price. At least with stars you will see when to charge it.

Edit: this was before the watchdog code, I bet it reboots every 5 minutes when it gets flat now.

I was using these (think I made ~8 and shipped them) I am now using these

the dimensions are there on the site you could mock up paper box and see size



weird thought, wonder if the resale of those 8 will be higher later because they are more rare....

I implemented this change just then.  Putting BTC in Altcoin box now gives USD


Also replacing zero with capital O so that there is no diagonal line in it on the display now.


NOTE: these things are hard to photograph properly, the back-light makes the background dark at night.

Name: EverGreenCoin
Code: EGC
Algoritm:  X15
System:  POW/POS
URL: http://evergreencoin.us/
Coin Logo: <-upload square image of logo